Hoefer GD2001 Vacuum Gel Dryer

Chemotec NucleoCounter Type 900-004 This was removed from a lab where it was surplus to requirement (more)s. The unit powers up and it is in good cosmetic condition with minor marks from use. The PSU is included.

JEOL JEM-100CX II Electron Microscope Vacuum Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit is untested but in reasonable cosmetic condition. It requires a connection to the main system, which we do not have.

These units were removed from a university lab as surplus to requirements. We have not tested them a (more)t our site as we do not have the necessary power supply cable, but the lab manager believed these were working when last used so they are presumed to be functional. 1x Oxford Applied Research DC25 Ion Source Supply1x Oxford Applied Research DC Ion Source Neutraliser & Extractor Supply

This Hanning Elektro-Werke Trivac Vacuum Pump Typ D4B was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been tested with a gauge (not included). It appears to be working well. The power cable is not included. It is in good cosmetic condition with some marks from use. It comes with 1 x Varian Oil Mist Eliminator

VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head Upper Measuring Limit 100 mbar/hPa (750 Torr) L (more)ower Measuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Robust plastic / ceramic vacuum sensor VSP 3000 with high chemical resistance - VSP 3000 with a wide measuring range from atmospheric pressure to fine vacuum (10-3 mbar) thanks to the thermal conductivity measuring principle The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The vacuum sensor VSP 3000 is based on the gas thermal conductivity (Pirani) principle for the wide measuring range from atmospheric pressure to 10-3 mbar. Thanks to its structure made of chemically resistant plastics (PBT, PUR) and ceramics, it offers significantly higher chemical resistance and robustness compared to conventional Pirani sensors with fine wire metal filaments. Please also note our alternative product VACUU·VIEW extended.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head includes: - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards D13550300 ELD500 SL Standard Sniffer Line, 4 Meters Length 4 Meters Gas Throughput 15 to 25  (more)sccm For Use With ELD500 Leak Detectors Features - Designed for use with ELD500 leak detectors to locate gas leaks on test objects - Effective sniffer line length of 4 meters for extensive reach - Gas throughput ranging between 15 to 25 sccm for optimal performance - Features red and green LED indicators for real-time leak rate status - Simple setup by connecting to leak detector’s inlet port and "OPTION" input The Edwards D13550300 ELD500 SL Standard Sniffer Line, 4 Meters is designed for pinpointing gas leaks on various test objects when used alongside ELD500 leak detectors. This product features a KF25 flange for vacuum connection and an 8-pin plug for electrical connections, ensuring easy integration with your existing systems. The sniffer line supports a gas throughput of 15 to 25 sccm, optimizing performance and accuracy in leak detection tasks. Notably, it includes visual indicators with a red LED to signal when the leak rate exceeds Trigger 1 threshold and a green LED to indicate when it falls below, providing clear, immediate feedback during operations. To set up, simply connect the sniffer line's KF25 flange to the ELD500 leak detector’s inlet port and the 8-pin plug to the detector's "OPTION" input for seamless functionality. INCLUDED: The Edwards D13550300 ELD500 Sniffer Line includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Prior Optiscan ES9Z Microscope Stage Controller with CS152Z This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Included with it are;1 x Rotary wheel control module with up, down and speed buttons. Model CS152Z Serial No. 363411 x 12v power adapter

Memmert VO101 Vacuum Oven 101L, 230V Temperature Range Ambient +5°C to 200°C Vacuum Range 5 to 1100 (more) mbar Chamber Volume 101L (3.6 cu. ft.) Features - Direct contact between load and heatable thermoshelves ensures rapid and uniform temperature control - Digital pressure control for rapid, gentle drying, optimizing process safety for delicate materials - Optional speed-controlled vacuum pump available, enhancing energy efficiency by approximately 70% - Multi-level heating and sensing system with individually placeable, calibratable thermoshelves for precise temperature adjustments - VDE-tested anti-splinter door construction enhances safety across all operational models - Constructed from high-quality, rust-resistant stainless steel for durability and ease of cleaning - User-friendly operation with intuitive AtmoCONTROL software programming - Integrated data logger and multiple interface options for comprehensive documentation and control - Energy-saving features and chemical-resistant components extend service life and reduce operational costs The Memmert VO101 Vacuum Oven 101L, 230V stands as a pinnacle of efficiency and precision in the field of vacuum drying. Designed for diverse applications such as drying food, cosmetics, electronic components, and more, this oven guarantees rapid and uniform temperature control through its direct contact between the load and heatable, removable thermoshelves, ensuring no heat loss. This model features digital pressure control that facilitates rapid yet gentle drying, optimizing the process for delicate materials. The VO49 is engineered with a multi-level heating and sensing system, which includes individually placeable thermoshelves equipped with separate sensors for accurate temperature control and short process times. This system reacts dynamically to different loads or humidity levels, maintaining a constant set temperature crucial for effective vacuum drying. Additionally, each thermoshelf can be individually calibrated to meet specific testing requirements. While the VO101 oven itself is robust and reliable, it is worth noting that the speed-controlled vacuum pump, which enhances the system's energy efficiency by approximately 70%, is available as an optional accessory and is not included as standard. This pump is designed to be chemical-resistant and operates with a low final vacuum of up to 2 mbar, significantly extending the service life of membranes and reducing operational costs. Constructed from high-quality, rust-resistant stainless steel that is easy to clean, the VO101 offers a user-friendly and intuitive operating experience. It is fully programmable via the AtmoCONTROL software, comes with an integrated data logger, and multiple interface options for comprehensive programming and documentation. This makes the Memmert VO101 Vacuum Oven a versatile and essential tool for any lab needing precise and efficient vacuum drying capabilities. INCLUDED: The Memmert VO101 Vacuum Oven 101L, 230V includes: - 1 x Thermoshelf - 2 x Locking Hooks for Thermoshelf - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

KIT 195.M is a density determination kit intended for PS M precision balances of high capacity, oper (more)ating on the basis of RADWAG MonoBLOCK® technology, and featuring 195x195 weighing pan. This stainless steel accessory allows determining density of: solids, liquids.

RMCS system is a proprietary RADWAG software intended for support of calibration and testing procedu (more)res in a laboratory, from the moment of accepting an order, through its progress to calibration certificate issuing. The software manages the complete calibration and testing process. Mass comparators and software for network management of calibration process provide improved efficiency, reliable measurement results and complete calibration process documentation, plus lower labour costs. The system enables to initiate the calibration procedure by means of a task order sent to a mass comparator, and autonomously by the mass comparator itself. In both cases, the data is transferred to the software for the purpose of registering, controlling and finally issuing a calibration certificate. Mass comparators linked in the RMCS system autonomously communicate with THB modules recording ambient conditions (temperature, humidity, atmospheric pressure) throughout the whole control process. The modules are detachable from the mass comparators, this makes calibration of their sensors easy. Data on current ambient conditions is displayed in real time on mass comparator’s display. The data is also sent do RMCS software for control and archiving purposes. System modules: Ambient conditions monitoring module Installed, direct communicates with the mass comparator; Record of ambient conditions (temperature, humidity, atmospheric pressure) and air density calculation; Constant monitoring of ambient conditions in direct vicinity of the mass comparator and its weighing chamber; Graphic presentation of ambient conditions on mass comparator’s display. Weighing module Automatic and/or manual mass comparators as components of the RMCS system; Access to reference weights and test weights databases via RMCS software; Performance of calibration tasks ordered via the RMCS software; Self-test procedure determining mass comparator’s repeatability parameter; Transfer of measurement results to the software memory. Calculating and data storage module Sending tasks to mass comparators; Downloading mass and ambient conditions data from mass comparators; Operation on client databases / tasks / standards; Monitoring of calibration dates; Database of completed calibrations, documentation printing and archiving. Functions Complete management of a metrology laboratory calibrating mass standards and weights using RADWAG mass comparators of Y series; Calibration using ABBA and ABA methods; Network supervision over many PC workstations thanks to use of MS SQL database; Complete management of calibration orders; Extended database of reference weights and test weights; Extended database of clients, operators and users; Database of manual and automatic mass comparators; Database of calibration orders; Management of pending tasks based on issued calibration orders; Tasks and orders schedule; Not ordered weight test – quick check; Manual or automatic calibration of weights; Communication with automatic RADWAG mass comparators; Bilateral data synchronization with RADWAG mass comparators; Calibration process reports; Issuing calibration certificates according to pre-defined template; Export of report results to various file formats: PDF, MS Word, Excel; Record of events; Register of orders and calibration certificates; Archive files of calibration protocols, orders, calibration certificates and ambient conditions; Secured access to the software – log in procedure using password.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW