Automatic Cross Hatch Cutter

Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz Collector Temperature  (more) -85°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz includes: - Vacuum Hose - 2 x Hose Clamps - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA CBC ROTAVISC SBS me-vi Viscometer Package Viscosity Measuring Range 40,000,000 mPas Speed Range (more) 0.01 to 200 rpm Working Temperature -100 to 300°C Features - A second beaker (600 ml) can be pre-tempered during the measurement - Optimized water flow management in the insulated bath for fast and precise temperature control - Equipped with the environmentally friendly natural refrigerant R290 - CBC VISC lite can also be used for heating standard vessels according to DIN for absolute viscosity definition with ELVAS spindles or double-walled beakers - The easily removable and cleanable air filter guarantees optimum performance - ROTAVISC and CBC VISC lite are compatible with the labworldsoft® laboratory software, enabling easy automation, control and documentation of measurement results The viscosity of most liquids depends on the temperature. To obtain reliable measurement results, accurate temperature control is crucial. The CBC ROTAVISC SBS me-vi Package is the perfect solution for precise viscosity measurement of temperature-dependent samples in the laboratory. The ready-to-connect package combines the ROTAVISC SBS me-vi rotational viscometer with the CBC VISC lite heating and cooling bath circulator. The sample is measured directly in the heating bath under controlled conditions. ROTAVISC SBS me-vi is a high-performance rotational viscometer for applications in a measuring range from 100 to 40,000,000 mPas. Equipped with advanced ball bearing technology (SBS - steel ball bearing, suspended), it offers exceptional reliability, even in demanding applications with high sample throughput, frequent spindle or location changes or under rather harsh environmental conditions.The CBC VISC lite heating and cooling bath circulator was specially developed for use with IKA viscometers. It covers a temperature range from -25 °C to 125 °C and offers space for two standard beakers (600 ml). This allows a second sample to be pre-tempered during the measurement. Equipped with natural refrigerant R290, the CBC VISC lite is a sustainable and environmentally friendly alternative.INCLUDED: The IKA CBC ROTAVISC SBS me-vi Viscometer Package includes: - ROTAVISC SBS me-vi control - ROTASTAND - CBC VISC lite - SP set-2 - PT 100.8 - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty

Temperature range without humidity: 0 (at least 20 below ambient temperature) to 70°C Temperature ra (more)nge with humidity: 5 (at least 20 below ambient temperature) to 70°C Temperature accuracy: 0.1°C Humidity range: 10 – 90% RH Humidity accuracy: 0.5 % RH Humidity supply: Distilled water from external tank by self-priming pump Humidification: humidification by hot steam generator Dehumidification: dehumidification by cold trap using the Peltier technology Interior dimensions (WxHxD): 1040 x 1200 x 600 mm Volume: 749 l Dimensions (WxHxD): 1224 x 1720 x 856 mm Weight: 208 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW