Haier DW-86L388A Ultra Low Temp Freezer

Thermo Fisher TDE60086FV Ultra Low Temperature Freezer Lab This item was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in great cosmetic condition.

New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. it is in good cosmetic condition with minor marks 4 Shelves - 57 x 55cm

Eutech Instruments Salt 6+ Salinity - Temperature Meter Lab This item was removed from a university  (more)lab where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Included: - 1 x Instruction manual - 1 x Hard case - 1 x Approx 50ml deionised water - 1 x Approx 50ml 45ppt NaCl solution - 1 x Approx 50ml 25ppt NaCl solution - 1 x Approx 15ml 5ppt NaCl solution

Arctiko SF 500 -60°C Low Temperature Chest Freezer Temperature Setting -30°C / -60°C Volume 13.0 cu. (more) ft. (368L) Cooling System Static Features - Single compressor technology that ensures easy maintenance, lower heat dissipation, and low energy consumption - Newly developed noise reduction technology reduces noise level drastically for a more pleasant work environment - Filter less construction prevents dust from blocking the airflow which reduces the unit’s ability to dissipate heat effectively, minimizing maintenance procedure - The user friendly XR30CX controller is standard and includes different alarms such as visual, acoustic, probe failure, and more - An insulated inner door is featured for providing better recovery time after door openings and optimal temperature stability - Features a premade access port, making it easier to monitor or inspect the unit with external probes - 100% HCFC & CFC free The Arctiko SF 500 -60°C Low Temperature Chest Freezer is a compact low temperature chest freezer designed to work in high traffic labs. The single compressor technology ensures a quick pulldown, fast recovery time, and high temperature uniformity throughout the compartment, even with multiple door openings. The single compressor technology is also specially designed to reduce the number of mechanical components that generate unnecessary heat and noise. The technology featured in this unit ensures the best possible storage capacity per square meter of any chest freezer model in the market. The SF 500 has optimized internal storage for the best overlook. With the included stackable basket and the optional stainless steel front rack storage system, samples will be easily accessible at any time. This freezer includes a premade access port, making it easier to monitor or inspect the unit with external probes. This freezer also features filter less construction, which makes cleaning unnecessary. The evaporator coils are spaced so far apart that dust will not be trapped and obstruct the airflow. With this unique construction, the dust intake is minimal, which eliminates the need for filters entirely saving on maintenance time and cost. INCLUDED: The Arctiko SF 500 -60°C Low Temperature Chest Freezer includes: - Key for Door Lock - 3 x Stackable Baskets - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Equipped with a 35 turn glass coil. Max. Temp. 60 °C

This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full w (more)orking condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-37279 2x Bio-Rad model 3000XiITEM-37280 PTI Warp Drive MCS-3400ITEM-37283 LKB 2212 HeliracITEM-37284 Hanna HI 2211 pH/ORP MeterITEM-37285 Grant W6 Water BathITEM-37286 Chemlab model-N18ITEM-37287 Jenway 3505 pH MeterITEM-37288 Savant PS 250ITEM-37290 HaakeBuchler Polystatic PumpITEM-37292 Pharmacia Fine Chemicals Electrophoresis power supply eps 500/400ITEM-44595 Kern DE 300K/100N Weighing ScalesITEM-45226 16x Metal Freezer RackingITEM-45249 2x Boxes of Polysterine packagingITEM-45252 Proline Microchef Microwave ST44ITEM-45254 Stuart S150 Rolling IncubatorITEM-45403 Delta Sonic BathITEM-45404 Roto-Shake GenieITEM-45405 UVP Dual Intensity Ultraviolet TransilluminatorITEM-45406 kodak gbx-2 safelight filterITEM-45407 Thermo Fisher Scientific Clamp For Test Tube 4-1027-CMCITEM-45408 1XPT100 ProbeITEM-45409 Techne Tempette Junior TE-8J Heated Circulating Water BathITEM-45410 TOYO MS-I6B Mini StirrerITEM-45411 Ilford Darkroom Safelight Photo Processing LightITEM-45412 2 x Helis Bio BottlesITEM-45419 Olympus 10.4/ 4x SliderITEM-45420 5 x small centrifugal tube holdersITEM-45421 CAPP CRP-412X Lab Plate ShakerITEM-45425 Vacuubrand Membran-Vakuumpumpe ME2

Labconco CentriVap 12-17 mm Acid-Resistant Rotor Easilyinterchangeable PTFE-coated aluminum rotors w (more)ith PTFE hubs hold tubes at anangle to maximize surface areas INCLUDED: The Labconco 7455001 CentriVap 12-17 mm Acid-Resistant Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience AD7LR-20-A11B 7L Low-Profile Refrigerated Circulator, Advanced Digital (-20 to 200C), 12 (more)0V, 60Hz3D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD7LR-20-A11B 7L Low-Profile Refrigerated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD7LR-20-A11B 7L Low-Profile Refrigerated Circulator, -20°C to 200°C, 200W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW