Olympus Objective WHN10X-H/22

Zeiss Planapo 63x/1.4 Oel Microscope Objective 461841-9901 The unit is in good cosmetic condition bu (more)t has not been tested.

Olympus BHB Binocular Microscope This was removed from a university lab where it was surplus to requ (more)irements. The unit powers up and is in good working order. It is in good cosmetic condition but has marks from age and use. Included are; 10XWF COMP Eyepiece x 2Clear visibility through both. Olympus FLPL40 0.75 0.17Serial#: 401635Clear visibility, no fault. Olympus PL10 0.25Serial#: 420348Clear visibility, no fault.

Prior Model. PX042 Compound Trinocular Microscope With Four Objectives Lab This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

Prior PX042 Compound Microscope With Four Objectives Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA RC 2 Lite Recirculating Chiller Working Temp. -10°C to Room Temp. Pump Pressure Max. 0.35 bar Fl (more)ow Rate Max. 18 L/min Features - Perfect for cooling rotary evaporators, reflux condensers, and heat-exchange devices - Environmentally friendly design with natural refrigerant R290 - Illuminated sight glass for easy observation of filling levels - Large working volume of 2.5 L for extended applications without refilling - Easily accessible and cleanable stainless steel mesh filter for consistent cooling capacity - Simultaneous operation of multiple small applications supported by a pressure-/suction pump - Temperature stability of ±0.5 K with PID control for precision - Compact dimensions (8.86 x 15.1 x 16.9 in.) and low noise level of 51 dB(A) - Features RS 232 and USB-B interfaces for versatile connectivity - Electrical requirements: 115 V, 50/60 Hz, 250 W The RC 2 lite is the perfect peripheral device for the cooling of rotary evaporators, reflux condensers or as a cooling source for devices that dissipate heat with the help of a heat exchanger (e. g. double-walled grinding containers, cooled incubators, laboratory reactors, cooling coils).The easily accessible and easy-to-clean mesh filter (stainless steel) ensure a consistently high cooling capacity over years. Thanks to the low filling volume of just one liter, the RC 2 lite is able to reach low temperatures particularly fast. The large working volume of 2.5 liters enables a high number of external applications without refill of liquids. The filling level in the reservoir can be clearly observed through the large, illuminated sight glass. The powerful pressure and suction pump enables the simultanous operation of several small applications as well as external applications in open bath vessels in combination with a level controller. Thanks to the natural refrigerant R290, the RC 2 lite is remarkably environmentally friendly and well prepared for the future.INCLUDED: The IKA RC 2 Lite Recirculating Chiller includes: - 2 x Hose olives DN 8 - USB Cable - Hexagon Socket Offset by Screw Key - Warranty Card - Power Cord - Operator's Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

This Nikon TMS Inverted Microscope was removed from a university lab where it was surplus to require (more)ments. The unit powers up and has been tested by a service engineer. It is in full working order. There are no objectives included but it was tested with one from another unit. It is in good cosmetic condition with some marks from use. Eyepieces:2x CFWE 10XA/18

Memmert ICO150 CO2 Incubator 156L, 115V Temperature Range Ambient +5°C to 50°C Temperature Uniformi (more)ty ± 0.3°C at 37°C Chamber Volume 156L (5.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO150 CO2 Incubator 156L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO150 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO150 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO150 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO150 CO2 Incubator 156L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - 1 x Stainless Steel Water Tray - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Hettich 1324 Swing Bucket Rotor The Hettich 1324 Swing Bucket Rotor is a centrifuge rotor designed f (more)or use in clinical and research laboratories. This rotor body has a maximum capacity of 4 x 100ml buckets, which are sold separately, and can achieve a maximum speed of 4,000 RPM with a maximum RCF of 2,630 x g. It is compatible with Hettich Rotofix 32A and Universal 320/R Centrifuges, which offer precise control for consistent results. The Hettich 1324 Swing Bucket Rotor is a useful tool for labs that require high-speed centrifugation for applications such as molecular biology, biochemistry, and cell culture research. It is easy to install and maintain, making it a reliable and cost-effective solution for your lab's centrifugation needs. INCLUDED: The Hettich 1324 Swing Bucket Rotor includes: - Rotor Body (No Buckets Included) - 6 Month Full Parts and Labor Warranty Hettich 1324 Swing Bucket Rotor SpecificationsMaximum Speed4,000 RPMMaximum RCF2,630 x gMaximum Capacity4 x 100mlMaximum Radius14.7 cmCentrifuge CompatibilityHettich Rotofix 32A & Universal 320/R Centrifuges

Boekel Scientific 230402 Big SHOT III, 10-bottle Hybridization oven, 115VWhether you areworking with (more) Northern Blots, Southern Blots, Microarrays or another applicationthat requires incubation, you will find the Big SHOT III™ Hybridization Oven isa perfect fit for the job. Thisunit is designed to provide rapid heat-up, excellent temperature stability andefficient mixing for all types of hybridization and incubation applications. PID temperature controller for rapid heat up and excellent temperature stability Forced air convention Settable over temperature safety thermostat Programmable digital timer - up to 99 hours, 59 minutes Supplied with a standard carousel Carousel speed up to 60 RPM in 1 RPM increments Reversible door Stackable Easy to remove stainless steel drip pan 2 year warranty INCLUDED: The Boekel Scientific 230402 Big SHOT III, 10-bottle Hybridization oven, 115V includes: - Standard Carousel - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty