Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x)

Nikon Eclipse Ni Microscope With Infinity 3 Camera Lab This system was removed from a university whe (more)re it was surplus to requirement. The microscope is in good cosmetic condition and full working order. It is fully operational with both software installed on the included PC. Includes the following: HP Desktop PC with Windows 10.Software installed:- Lumenera Infinity Analyze 7.1.1.66 imaging software. - And MicroManger 2.03. Infinity 3 camera with power supply cable. Objectives: - Nikon Microscope Objective - Plan Fluor 10X/0.30 Ph1 DLL ∞/0.17 WD 16.0 - Nikon Microscope Objective Plan Fluor 20X/0.50 DIC M/N2 ∞/0.17 WD 2.1 - Nikon Microscope Objective Plan Fluor 40X/0.75 Ph2 DLL ∞/0.17 WD 0.72 Eyepieces: - 2 x Nikon C-W10xB/22

Stereomicroscope trinocular Nexius Zoom NZ.1903-P. Objective-zoom 0.67 to 4.5 x, magnification of 6. (more)7 x to 45x, light incidente and transmitted 3-W LED. SPECIFICATIONS EYE Pair of wide-field eyepieces HWF10x/22 mm With adjustment of ± 5 diopters built-in. HEAD Trinocular head with tube holder eyepieces inclined 45°. Distance inter-pupillary adjustable between 54 and 75 mm It has a port trinocular splitter with a beam of light (50:50) OBJECTIVES Objective Zoom 1:6.7, with increases of 0.67 x to 4.5 x. Field of view from 33 mm to 4.9 mm working Distance 110 mm Lens lens optional 0.5 x, 0.75 x, 1.5 x and 2.0 x. All optical components are anti-rust and treatment of layers of anti-reflection for maximum light transmission. INCREASES Working distance and field of view with eyepieces supplied in the standard equipment HWF10x/22 mm D. T.* working Distance STAND Flatbed large format with column (model-P) bracket and movable in height with coarse by rack and pinion system mounted on the guides, ball bearings, high-precision, dual-LED lighting system 3W, base with 2 clamps-fastening of the sample, LIGHTING Incident and transmitted LED 3W power internal 100-240 Vac. Both illuminators can be used simultaneously, and enable the regulation of intensity independent. PACKAGING Supplied with power cable, protective cover, replacement fuse and user manual. Case of polystyrene.

Nikon Eclipse TE300 Inverted Fluorescence Microscope This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on using a power supply from a different item, but no power supply is included. Bulbs are in full working order. The item is in good cosmetic condition.As it is not a complete microscope, it is listed as Spares/Repair. The systems was professionally serviced and the following was discovered. • No evidence of salt corrosion detected.• DIC nosepiece present but objectives missing.• External power supply working & remote cable present.• Some damage to condenser lens (LWD 0.52) detected – not detrimental to image quality.• No phase or DIC modules present within condenser & no blanking plates fitted.• No fluorescence attachment or filter slider.• Focus spindle gear is cracked.• Some external shutters and filter wheels but incomplete.• Has an Orbit Monochromator controller – incomplete.• Missing stage plates.• Front photo port bung missing. Includes:- Nikon Condenser Turret Model#: Nikon LWD 0.52 - Nikon Binocular Head Serial#: 063482 No eyepieces or objectives are included. No bulb/light source is included. Model: TE300 TE-DH100WSerial No.: 413419

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA R 1382 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.Stirrer Ø: 55 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1382 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW