Motic AE21 Series Trinocular Inverted Microscope with 2x Objectives

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Zeiss Stemi SR Stereo Microscope was removed from a university lab where it was surplus to requ (more)irements. The unit is in working order and focuses well. It is in reasonably good cosmetic condition but has some marks from use. 3 x Eye Pieces:-W 10 x/25 (46 40 02)W 10 x/25 (46 40 03)W - PI 10 x /23 (45 50 44)Part - 45 60 29 0.25 x Stage Part - 47 52 65Condenser Part - 47 50 61Magnifier Part - 47 52 53

This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault. The (more) university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)" From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC. The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either. When starting the Leica PC program it shows the following message: "AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller. The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result. It is sold for spares/repairs. Please note that the marble table in the photos was retained by the lab.

Motic Panthera E2 Binocular Compound Microscope Manufactured to Withstand the Time With the new micr (more)oscope Series Panthera E2, your decision is distinct. This microscope series allows to experience Life Sciences in a new way, with the best possible learning effect. From now on, you achieve your teaching goals in the easiest way, with the highest precision and accuracy that meet all your intentions in mind. Even in a small lab with a small budget, these new technologies from Motic will convince you.Panthera E2 microscopes combine high-quality materials and precise engineering to a persistent and resilient construction. The smooth operation of the mechanics is self-evident for fast and reliable results, responsible for shifting your daily work in the classroom and lab to a higher level of quality. User-friendly design, robust for tough environments, and unique features grant the best performance. Models of this series convince positively in smooth operation and haptic.Robust Functionality for Demanding Environments Panthera E2 was developed by listening to your objectives in mind. Features like a reversed 4-fold nosepiece, a rackless X/Y-stage with a standard slide holder and an upper limit stop fulfill users' demands. The standard eyepiece tubes can be adjusted to accommodate different physiques. In addition, all tubes are rotatable. Together with a small footprint and compact design worries about small working places or storage problems are obsolete.Strong Optical Performance with Ultra Contrast Optics The Panthera E2 series is equipped with new Ultra Contrast (UC) Plan Achromatic objectives in a range from 4X to 100X magnification. These objectives together with neutral eyepieces guarantee the best performance in terms of color fidelity and contrast. A fully corrected intermediate image for digital access is granted. The optional 100X/0.8 "Dry objective" is especially favorable in environments where the time-consuming immersion procedure is considered too difficult and complicated.Efficiency and Energy Saving LED Illumination Setup The low consumption LED light source in a Fixed Koehler setup stands for a "cool" illumination with a long lifetime. An unbeatable key feature for outdoor activities: A USB port in the stand grants the functionality of the microscope independent from the mains by a power bank.Close to your Individual Applications Panthera E2 microscopes can be upgraded for different contrast methods: Phase contrast for unstained samples from botany, zoology, and medicine is a classic, Darkfield for impressive images from protozoa is on the verge of extinction, POL contrast for birefringent structures is an underrated method for biology and medicine. For plastics and foils from the industrial lab, this method is standard.Click Here to View Product Video INCLUDED: The Motic Panthera E2 Binocular Compound Microscope includes: - 4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 100X/1.25/S-Oil (WD 0.16mm) Objectives< - Dust Cover - Power Cord - Allen Key - Immersion Oil (5ml) - 5 Year Manufacturer's Warranty

Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination Objectives S-AP (more)O 5X, 10X, 20X, 50X Objectives Optical System Colour Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Expertly designed, carefully crafted, high-performance Motic objective lenses provide excellent clarity in any observation environment. - Intelligent, Sleek Design - Advanced ergonomic design, compact size, carefully sourced high-quality materials ensure durability. - Versatile digital capabilities minimize fatigue during extended periods of operation. - Innovative Module Design - The compact size of the PA53-MET minimizes required installation space. - Interchangeable individual modules meet the needs of any application. - You can select the appropriate optional accessories for your task: reflected light illuminators, transmitted light illuminators, XY stage, Z-axis, etc. The Motic PA53MET is a trinocular metallurgical microscope featuring a reflected intermediate illumination system suitable for bright field observation. It comes equipped with a 100W halogen lamp house and widefield eyepieces offering 10X magnification and a 25mm field of view. The device includes a coded quintuple revolving nosepiece for BF with a DIC slot, and Plan S-APO objectives at 5X, 10X, 20X, and 50X magnification. Additionally, the PA53 MET's design is highly modular, allowing for future upgrades with motorized components. Motic's PA53 MET series microscopes are tailored for industrial quality control and the analysis of opaque materials. They feature semi-apochromatic objectives that deliver sharp, clear images. The microscope's incident illumination supports various contrast methods, including Brightfield, Darkfield, Polarization, and DIC, revealing defects not visible under standard lighting conditions. INCLUDED: The Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination includes: - S-APO S-APO 5X, 10X, 20X, 50X Objectives - Widefield (FN25) eyepiece 10X/25mm - 4x4 inch right hand stage with metal stage plate - PA-25ND6 neutral density filter and PA-25LB LBD filter - Widefield (FN25) eyepiece 10X/25mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Capacity: 96 tubes 0.2 ml, 96 well microplates Block: Silver Block coating: Gold Max Heating Rate: 6 (more).0°C/sec Max Cooling Rate: 4.0°C/sec Avg Heating Rate: 5.5°C/sec Avg Cooling Rate: 3.5°C/sec Temperature Uniformity at 95°C: ± 0.50°C after 15 s Temperature Uniformity at 70°C: ± 0.25 °C after 15 s Temperature Uniformity at 55°C: ± 0.15 °C after 15 s Gradient Temperature Range: 3°C to 99°C Temperature Range: 3°C to 99°C Control Accuracy: ± 0.1°C Lid Temperature Range: 30°C to 110°C Dimensions (WxDxH): 277 x 457 x 264 mm Weight: 15 kg

PS.R1 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. New PS.R1 balances like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm. Balances with a smaller pan have a draft shield. They were equipped with the system of external mass adjustment. PS.R1 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). . Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard: Database – a direct access to databasis Function - a direct access to the basic functions F1 to F4 – programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.