Leitz Wetzlar 5x/0.09 C Microscope Objective Mikroskop Objektiv

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

THis was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)none of the objectives are particularly clear, and two don't show an image at all (detailed below). The unit is quite stiff and awkward to use. For these reasons it is sold for spares/repairs. It is in reasonable good cosmetic condition with minor marks. 2x Carl Zeiss Kpl 8x Eyepieces 1x Leitz Wetzlar H 20x/0.40 ∞/1.80 Quarzgl. (no clear image) 1x Carl Zeiss 4494688 Ph2 40x/0.75 160/0.17 1x Carl Zeiss 4459404 Ph2 NEOFLAUR 25x/0.60 160/0.17 1x Carl Zeiss 4836489 Ph2 NEOFLAUR 16x/0.40 160/- 1x Carl Zeiss 4111437 Ph3 NEOFLAUR 100x/1.25 oil 160/- (no clear image). 1x Carl Zeiss Nose Piece III RS 46 62 49-9904 1x Carl Zeiss Stage 47 33 56-9901 1x Carl Zeiss Condenser 4680811 1x Carl Zeiss Microscope power supply 47 20 83 6 volt and 12 volt output. 1x Carl Zeiss Lamp power supply VHW 50f-2b 39 26 41 showing 365 hours and 55 minutes. 1x Carl Zeiss Lamp 12 volt 100 w 46 8019-9901 1x Carl Zeiss Lamp HBO 50 w 46 80 32-9902

Olympus IX70 Inverted Fluorescence Microscope This item was removed from a university lab where it w (more)as surplus to requirements. The microscope is in reasonably good cosmetic condition but some issues were found during servicing. • Fluorescence attachment & mercury lamphouse present but no mercury power supply starter.• 2 filter cubes present – U-MWG2 & U-MWB• Some evidence of corrosion due to salt or other liquid.• Coarse focus very stiff – clutch lever stuck fast.• Transmitted light power supply is good.• Eyepiece adjusters are stuck. Therefore, it is listed as Spares/Repair. Includes:- Olympus BX 100W HBO Mercury Microscope Lamp U-ULS100HG (no power supply included) - 2 x WH10X-H/22 eyepieces - Fluorescence attachment and mercury lamphouse (no mercury power supply starter) - 2 filter cubes: U-MWG2 and U-MWB Condition Notes:- Missing stage, objectives, and condenser - Some corrosion present, likely due to salt or liquid exposure - Coarse focus is very stiff, with a stuck clutch lever - Transmitted light power supply is functional - Eyepiece adjusters are stuck

Motic Panthera TEC-BF/RL/TL Trinocular Upright Industrial Microscope, 6x4 Stage Objectives 5X, 10X,  (more)20X, S-APO 50X Optical System Color Corrected Infinity Optical System (CCIS) Illumination 3W Led & Integrated TL 0.06Wx39 LEDs Features - Utilizes a Color Corrected Infinity Optical System (CCIS) for sharp, clear imaging with minimal optical aberrations. - Features a trinocular Siedentopf head that swivels 360° and is 25° inclined, with a fixed 50:50 light split for simultaneous viewing and camera attachment. - Equipped with Widefield UC-WF10X/22mm eyepieces with diopter adjustments, providing a wide field of view and sharp focus across the entire viewing field. - Includes a selection of CCIS LD Plan Achromatic and S-Apo objectives for superior image clarity and precision, suitable for detailed examination of various materials. - Comes with a hard-coated mechanical stage, providing a smooth and stable platform for sample manipulation, featuring low position coaxial stage controls for precise movements. - Includes a dust cover, power cord, Allen key, and screws for metal extension support, ensuring you have all necessary components. - Integrated condenser concept for transmitted light, enhancing the examination of compound materials. The Panthera TEC MAT BF: a cutting-edge trinocular microscope tailored for material sciences. This sophisticated instrument is designed to handle opaque samples in industries and natural sciences with precision and ease. Featuring Long-Distance Plan Achromatic and Semi-Apo objectives, the Panthera TEC MAT BF delivers ultra-contrast images from reflective surfaces, making it perfect for detailed metallurgical analysis and other scientific applications. Equipped with UC eyepieces boasting a 22mm field of view, this microscope ensures broad and clear visibility. The advanced 3W LED ring illumination system, adjustable in color temperature, allows for segmental illumination, ideal for examining rough or uneven surfaces. With the innovative Motic LightTracer system, users benefit from a memory function that recalls optimal lighting settings, combined with a built-in Low-Energy mode and an LED feedback indicator to streamline workflow and enhance efficiency. INCLUDED: The Motic Panthera TEC-BF/RL/TL Trinocular Upright Industrial Microscope, 6x4 Stage includes: - Dust Cover - Allen Key - Screws for Metal Extension - Integrated 3W Led Illumination System - 6x4 in. Stage - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PA53MET-BD-T Trinocular Upright Industrial Microscope, Reflected & Transmitted Illuminatio (more)n Objectives S-APO S-APO BD 5X, 10X, 20X, 50X Objectives Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Expertly designed, carefully crafted, high-performance Motic objective lenses provide excellent clarity in any observation environment. - Intelligent, Sleek Design to guarantee efficient use of limited laboratory space. - Advanced ergonomic design, compact size, carefully sourced high-quality materials ensure durability. - Versatile digital capabilities limit operator fatigue during extended periods of operation. - Innovative Module Design. - Interchangeable individual modules meet the needs of any application. - You can select the appropriate optional accessories for your task: reflected light illuminators, transmitted light illuminators, XY stage, Z-axis, etc. The Motic PA53MET-BD-T is an advanced trinocular metallurgical microscope designed for both bright field and dark field observation. It features a reflected intermediate illumination system and a powerful 100W halogen lamp, complemented by a transmitted illumination system with a Long Working Distance (LWD) condenser. The microscope includes widefield eyepieces with 10X magnification and a 25mm field of view. Its coded quintuple revolving nosepiece supports bright field and dark field (BD) and features a slot for Differential Interference Contrast (DIC). Plan S-APO BD objectives are available in 5X, 10X, 20X, and 50X magnifications. The PA53MET-BD-T is highly modular, allowing future upgrades for motorized components, including a motorized stage for low magnification tiling of large samples. INCLUDED: The Motic PA53MET-BD-T Trinocular Upright Industrial Microscope, Reflected & Transmitted Illumination includes: - S-APO S-APO BD 5X, 10X, 20X, 50X Objectives - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This listing is for a Hettich EBA 12 Centrifuge. The unit is in full working condition and is ready (more) for immidate realese. The Hettich EBA 12 Centrifuge is a laboratory centrifuge designed for separating substances or mixtures with a maximum density of 1.2 kg/dm³. It is suitable for various applications, including serology, cell washing, and pelleting particles from suspension. Technical specifications Voltage: 220-240V, 50 / 60Hz Current: 2,2A Power: 350W Maximum speed: 18000 rpm Technical specifications rotor Rotor number: 1118 Maximum rotor speed: 5000 rpm Dimensions tubes (∅) x (H): 1.5 x 6.5 cm   External dimensions (W) x (D) x (H): 27 x 32 x 25 cm

This listing is for a Thermo Electron Corporation CR 4i Refrigerated CentrifugeSpecifications Capaci (more)ty:Swing-out rotor: (4 x 750 mL) 3000 mLFixed angle rotor: (8 x100 mL) 800 mLMaximum load: 3.6 kgSpeed range: 500 to 7800 rpmRCF range: 20 to 9900 x gTemperature range: -9°C to 40°CDimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″)Weight: 106 kg (233 lbs)Electrical: 120V, 60 Hz

High precision measurements The 2 g class E2 mass standard is a precision metrology tool, ideal for  (more)calibrating high-precision balances used in metrology, pharmaceutical, chemical laboratories and other research and industrial institutions. Product Features The ergonomic, cylindrical shape ensures ease of use and precise placement of the standard on the weighing platforms. Made from the best materials, it guarantees stability and resistance to changes in environmental conditions.

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.

Labconco CentriVap 28 mm Acid-Resistant Rotor Easilyinterchangeable PTFE-coated aluminum rotors with (more) PTFE hubs hold tubes at anangle to maximize surface areas INCLUDED: The Labconco 7455201 CentriVap 28 mm Acid-Resistant Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty