Leitz Wetzlar FOCOTAR 1:4.5/50

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Carl Zeiss Microscope 1058-431 Light Channel & 1269-480 Switching Mirror was removed from a (more) university lab. They units are in good cosmetic condition but have not been tested.

This item has just arrived in our stock. Please enquire for further details.

This Zeiss LSM 510 Meta Confocal High Resolution Microscope System was removed from a university lab (more) as it developed a fault. The university reported: "We have a confocal microscope (Zeiss LSM510 Meta) which we are hoping to sell. It powers up but doesn’t fully work, there must be a loose connection somewhere but I don’t have the time or space to work out where." The units are all generally in reasonable used cosmetic condition. All parts do power up individually but we could not get the system to run either. We believe there should be a PC containing software that we do not have. The system is sold for spares/repairs. The system consists of: 1 x Zeiss Axiovert 200M Microscope (1312-732)Fitted with:1 x Zeiss 1269-455 Dual Illumination Source Motorised Mirror Switch.1 x Zeiss 1058-431 Transmitted Light Channel LSM/Pascal.2 x Zeiss 1016-758 W-PI 10x /23 eyepieces.1 x HBO 100 Lamp 098.0042.000 (01/03163).1 x HAL 100 Lamp 42 30 00.With EBQ 100 Isolated Lamp PSU. 1 x Zeiss Laser Module 1294-260.Two of the wheels are broken, so they have all been removed and it has been put on a pallet. 1 x Zeiss LSM510 Meta System.Release 3.5 META 1305-593.With Zeiss Remote 1260-157. 1 x Microscope isolation table. Measures: 150cm L x 80cm W x 77cm H. 1 x Zeiss Temperature Control - 37 (0115.000). 1 x Zeiss AIM-SYSTEM Interface box 2436000101.

ZEISS PALM CombiSystem Axiovert 200M, XE120-XL,HV-D30P w/ Parts & Accessories This was removed f (more)rom a university lab where it was surplus to requirements. The system powers up and the microscope is in good working order. We had some issues controlling the camera and the stage during testing, but this may be due to user error. With the Palm RoboSoftware V4 we can control the following microscope features: - Stage Y Axis movement - Stage X Axis movement - Objective Motor (able to select objective) - Increase/Decrease Light - Change Light Source - Raise/Lower Objective It is in excellent cosmetic condition with minor marks. Included are the following; Carl Zeiss Axiovert 200MModel: Axiovert 200MSerial#: 3820005950Objectives fitted:Zeiss Fluar 5x/0.25Zeiss Fluar 10x/0.50Zeiss LD Plan-Neoflaur 20x/0.40 CorrZeiss LD Plan-Neoflaur 40x/0.60 CorrZeiss EC Plan-Neoflaur 63x/1.25 Oil M27Zeiss EC Plan-Neoflaur 100x/1,30 Oil Eyepieces:W-PL 10x/23 (Qty.2) P.A.L.M Microlaser Technologies Model: PALM CombiSystemSerial#: CSC-01010Date: 2007 Fujitsu Siemens Celsius R630 PC, Fujitsu Siemens SCIENVIEW B17-2 C CI Monitor (QTY.2) Fujitsu Siemens Keyboard, MouseModel: Celsius R630Serial#: YKFU009307 Both Monitors, PC, Keyboard and Mouse are in good cosmetic condition and power on with no issue.PC has the following software installed:Palm RoboSoftware V4 Hitachi HV-D30 CameraModel: HV-D30PSerial#: 0675280 Laser Quantum LD3000 power supplyModel: ForteSerial#: 02165p                                                   Zeiss CryLaS FTSS 355-50Serial#: B594C279 Item powers on and is in full working order.Communicates with control panel and microscope. EXFO X-Cite Series 120Model: XE120-XLSerial#: 0570 Item is in good cosmetic condition.Item powers on with light source in full working order. All items listed above are sat on a Melles Griot Optical Table with PALM CombiSystem being fixed to it.Measurements and weight of Melles Griot Optical Table are as follows:Dx120Wx90Hx77cmWeight: Additional Parts & Accessories: Zeiss AdhesiveCap 500 ClearPALM MembraneSlidesPALM CombiSystem C User ManualsPALM DishHolder 50 CPALM MultiCap Insert 8cPALM MultiCap Collector D 8C (Qty.2)PALM CollectorSet SingleTube II 500PALM CombiSystem User manual (Qty.2)PALM RoboSoftware Software Guide (Qty.2)Laser Quantum Forte Operating ManualPALM MicroBeam Technical InformationZeiss Axiovert 200 Operating ManualZeiss DuplexDish 50 Sterile Packed (Qty.6)LumoxTM Dish 50 Hydrophilic, Sterile (Qty.5)Zeiss MembraneSlide 1.0 PenX-Cite In Control Series 120 User's GuideZeiss PALM RoboSoftware CDPALM MicroLaser System RoboSoftware 4.0 CDFujitsu Siemens Product Recovery CDCarl Zeiss 29 Software Release 4.6Zeiss Axiovert 200 M/Mat Floppy Disc3-CCD Color Camera Model HV-D30 Operating ManualFujitsu Siemens Celsius Drivers & Utilities CDScenview B17-2 CI / B19-2 CI

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

DO305 Karl Fischer drying oven is ideal for the accurate determination of the water content of solid (more) or viscous samples, such as: Substances that release the water only at a high temperature, such as plastic in powder or granular form     Substances that cause lateral reactions with the Karl Fischer reagent, such as oxidizing inorganic salts     Substances that cause problems in the titration vessel because of their consistency, such as fibrous or pasty substances     Substances that are poorly soluble or insoluble, such as wool, dough, tar and coal

Thermo Scientific Spinnaker Robotic Arm F01981 Lab This item was removed from a university where it  (more)was surplus to requirement. It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate. This item also includes the following: - Emergency Stop Button - MicroPlate Mount - Data Cable

Heidolph Hei-VAP Expert HL/G3B Coated Hand Lift w/ G3 Vertical GlasswareFeatures - Rotation speed ra (more)nge of 10 to 280 RPM - Heating bath temperature range of 20°C to 210°C - Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm - Multilingual menu and text display for error messages - Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller - Smart functions include timer and maximum temperature limitation - Optional display of vapor temperature - Highly resistant PTFE vacuum seals achieve maximum tightness and reduce expensive spare parts - Available in hand lift or motor lift models - USB and Micro SD interfaces featured 5" touch screen display with clear display of all values, featuring basic and advanced views, along with additional smart functions Separate knobs for rotation and heating with locking function to prevent accidental adjustments, along with LED ring lights Safety heating bath with overheat and dry run protection, featuring ergonomic handles for easy removal/disposal of contents The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert HL/G3B Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3B Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Crest Ultrasonics Perforated Basket for P2600 Ultrasonic Cleaner The Crest Ultrasonics Perforated Ba (more)sket for P2600 Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The Crest Ultrasonics Perforated Basket for P2600 Ultrasonic Cleaner is 19" in length x 10.75" in width x 7" in depth and is for use with the P2600 Ultrasonic Cleaners. The Crest Ultrasonics Perforated Basket for P2600 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.