HTG Firefly Bench Top Imager qNPA RNA DANN Super Capella Imaging System 90006

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This CapiScope VCS Video Capillaroscopy System was removed from a university lab where it was surplu (more)s to requirements. The unit appears to be fully working and we have tested the camera The system  consists of: 1 x KK Technology PC with Dell Monitor, Dell Keyboard & Microsoft mouse. Has the CapiScope 3.18.0.0 Imaging software installed and the relevant PCi interface cards fitted.1 x CapiScope Cam1 camera and mount.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39135 Fisher Scientific Power 608 ITEM-39137 Apelex ps 608 ITEM-39138 Apelex PS 608 ITEM-39139 Bio-Rad 2110 Fraction Collector ITEM-37095 Phenomenex DEGASSEX DG-4000 ITEM-37097 Hewlett Packard series 1100 waste bottle tray ITEM-37098 Agilent Technologies Waste Bottle Tray ITEM-39142 Apelex PS 304II ITEM-39143 Apelex PS 304II ITEM-25295 Mettler Toledo AG104 Digital Analytical Balance Laboratory Scales Lab ITEM-25809 Bibby Scientific Stuart Orbital Rotator SB3 Lab ITEM-11323 Thermo Scientific Barnstead RO Model 7155 Water Purification System Purifier Lab ITEM-39144 Techne Dri-Block DB-2A ITEM-41034 man150m fan x 2 ITEM-39145 Techne Dri-Block DB-2A ITEM-37102 Unicam Flow-Through Cell-(Boxed) ITEM-24751 Boekel UV Crosslinker Lab - No Bulbs. ITEM-40915 APC Back-UPS CS 500 ITEM-40916 Plastic Support Plate ITEM-40917 Bio-Rad Model 200/2.0 Power Supply ITEM-40918 Bio-Rad Power Pac 1000 ITEM-40919 Axon Instruments CyberAmp 380 ITEM-39149 Stovall The Belly DancerITEM-39150 Zeiss Microscope ITEM-39153 Swift M4000-D Microscope ITEM-39154 Bio-Rad Model 2110 Fraction CollectorITEM-39156 Techne Mini Centrifuge ITEM-39157 Life technologies tfx-20M ITEM-39158 Hancocks light box ITEM-39159 Jencons scientific light box ITEM-39160 IKA-Vibrax-VXA ShakerITEM-39059 Bio Rad 500ITEM-39060 AND Balance ITEM-39058 Consort E432ITEM-37105 Samsung Shoot and Share Memory Camcorder- boxedITEM-37106 JVC GR-D820 Camcorder ITEM-37107 JVC Everio Hard Disk Camcorder G SeriesITEM-37108 Perkin Elmer LC 240 Fluorescence Detector ITEM-39914 Horiba LY-201ITEM-41033 Olympus SZ40 Stereo Zoom Microscope

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubatorwith quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

This Profile Pro 8000 Module Chassis was removed from a university lab where it was surplus to requi (more)rements. The unit powers on and is in good cosmetic condition. Revision. 4.44Interface: 1.228x WDM sources It comes with; 1 x Kaba Micro- E Key Model No. ED9001

Izon Science Ltd - qViro Virus Viral &nbsp;Particle Analysis System This was removed from a univers (more)ity lab where it was surplus to requirements. The item powers on and comes with a USB cable and power supply. It is in good used cosmetic condition.

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R Weighing Records module, you can: record measurements at your weighing workstations in a safe and continuous manner; buffer the weighings on the scales and transmit them to the computer; work with external software for stockpiling, billing, accounting, and ERP systems; work with RADWAG weighing systems; automatically synchronize the time of weighing workstations; transfer databases from the computer to the scales; monitor the current status of the scales in the system; select products for production lines; archive weighings and functions for deleting archived weighings; exchange data with external systems; use friendly and flexible reporting mechanisms, such as: - generating data from a set period of time, - data browsing using the filtering option, - reporting individual weighings, - determining the name and image of report headers, - creating reports on production process statistics, - generating detailed and summary reports with selected information; create weighing graphs for products, scale, platform, operator, customer, batch and lot; export weighings to files: PDF, HTML, MHT, RTF, XLS, XLSX, CSV, TXT and more; customize the permission levels for different users of the system; customize the graphical interface, reports and graphs; select the language of each of the system components; work over Ethernet and Wi-Fi.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1&rdquo;colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal&rsquo;s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.