Zeiss Co-viewing Transmitted Light Microscope

This listing is for a Olympus CH MicroscopeIn 1976, Olympus launched the CH Series, modular biologic (more)al microscope series for practical laboratory teaching applications, in place of the KHS, KHC, HSB, and HSC.

Prior Model. PX042 Compound Trinocular Microscope With Four Objectives Lab This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives fitted: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

This Leica DM IRB/E Inverted Motorised Microscope was removed from a university lab where it was sur (more)plus to requirements. The item is in reasonable cosmetic condition. Parts of it are discoloured from dust/age while there are some stains in the joints/corners. The item is missing its stage and doesn't come with any additional components such as the electronic nosepiece control and a PSU for the light. The item powers on without issue but without a stage and the extra components we were unable to test it further. Included with this unit are the following:1x Leica cover 2x Leica eyepiecesL Plan 10x/20 M 1x Leica 476DI 5x objective506087∞/-/AN Plan5x/0.12 1x Leica Germany objective506205L 40x LMC∞/0-2/CHCX PL FluotarL 40x/0.60 CORR LMC

Leica DMLB Fluorescence Microscope + Glass Refractive Index Measurement System with Software This sy (more)stem was removed from a university lab where it was surplus to requirements. The units powered on successfully, both individually and as a system. The microscope is producing a clear image, and all moving parts are functional. The camera is also displaying a live image on the Hitachi monitor. Included Components:- Leica DMLB Microscope (Model: 020-519.011 DMLB) - 1 x Leica C Plan 10x/0.22 PH1 (506078) - HP Vectra PC - Monitor - Foster + Freeman Grim 2 (S/N: NL11322027) - Keyboard - Hitachi VM920K Monitor (S/N: 0059133) - Mettler Toledo FP82HT Hot Stage (Note: unable to heat) - Instruction manual

Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) PA Objectiv (more)es APO 2X, 10X, 20X Parfocality Adjustable Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage. The PSM1000 is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) PA includes: - APO 2X, 10X, 20X Parfocality Adjustable Objectives - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PA43 BIO PH Trinocular Upright Biomedical Microscope Objectives Plan UC 4X, 100X & Plan UC (more) PH 10X and 40X Optical System Scalable Infinity-Corrected(CCIS) Illumination Köhler Halogen 30W and LED 3W Module Features - Kohler illumination with option of Halogen or LED illumination - An automatic power-saving mode is engaged whenever an operator leaves temporarily. - Consistent, even Illumination with IL Function to ensure high quality imaging. - The rackless stage of the PA43 offers smooth movement of the stage with zero-backlash. - Meets a wide variety of application needs including pathology, cytogenetics, hemataology, and toxicology. - Specially designed non-cover glassed objectives are available separately as part of the PA43’s accessory lineup. The PA43 BIOMED is a new series from Motic Scientific, and represents a large step forward in combining modularity with ergonomics to improve application imaging workflows. A progression into routine work, this new microscope’s robust design and solid footprint does not compromise on optical quality and features. Its modularity offers flexibility when choosing a configuration that suits multiple end-user applications--from cost-effective solutions, to high-quality optical systems for lab diagnostics. The microscope is not only modular but also flexible in design, and can be upgraded at any time. INCLUDED: The Motic PA43 BIO PH Trinocular Upright Biomedical Microscope includes: - Plan UC 4X, 100X Objectives - Plan UC PH 10X and 40X Objectives - Wide-field eyepiece 10X/22mm - Rackless Stage - Kohler Illumination 30W - LED 3W Module - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Coherent Enterprise Laser Head & Coherent Laserpure 5 Chiller This system was removed from a un (more)iversity lab where it was surplus to requirements. The units both power up but have not been tested further. They are in good cosmetic condition with marks from use. Included are; Coherent Enterprise Laser Head Power SupplyModel: ENTCII-653Serial#: 020775654-ENICManu: July, 2002 Coherent Laserpure 5 Heat Exchanger water-to-water Laser Cooling SystemModel: LP-51Serial#: 17772Manu: 13 May, 2002

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01159Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12303, 12290 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe No testing carried out.

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System This system was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes: HAZMAT-0100045 Calmix Working Solution Bottle Expires : 11/30/2023

VACUUBRAND RZ 6 Rotary Vane Vacuum Pump Ultimate Vacuum 0.002 mbar (0.0015 Torr) Maximum Pumping Sp (more)eed 4.0 CFM at 60Hz Number of Stages 2 Features - High flow rates even at vacuum levels approaching ultimate vacuum - High water vapor tolerance due to efficient gas ballast; very good ultimate vacuum even with gas ballast - Vacuum-tight at switch-off; external anti-suckback valve not needed - Large oil volume: Long intervals between oil changes - Ease of maintenance due to telescopic design These powerful rotary vane pumps feature a particularly compact design and low weight for pumps of this capacity. They are the ideal solution for a wide range of laboratory and process applications that require low ultimate vacuum at medium to increased gas flow rate. Various packages including pump, oil mist filter, etc. are available. Rotary vane pumps are used when an ultimate vacuum between a few mbar and down to 10-3 mbar must be attained. Typical applications are degassing, lyophilization, fine vacuum distillation and drying chambers. The pumping unit PC 3 is the perfect choice for applications requiring special protection of pump and environment. Designed for use in chemical laboratories, the cold trap helps the pumps to handle large volumes of condensable vapors. The cold trap is metalized for extended coolant life and protected against implosion. INCLUDED: The VACUUBRAND RZ 6 Rotary Vane Vacuum Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database