Zeiss Axiostar Plus Binocular Compound Microscope Lab

This Vickers Instruments Microscope was removed from a university lab where it was surplus to requir (more)ements. The unit powers on and is in good cosmetic condition but the power switch is a little sticky and it is missing an eyepiece. All knobs and dials appear to be in working order. Included are; 3 x Vickers Objectives:Green 40/ 0.70White 10/ 0.25Misc 5/ 0.15 All three objectives are in good cosmetic condition. We struggled to focus the 40/ 0.70 one a little.

Zeiss Axioskop FS Fluorescence Microscope w/ 5 x Objectives This was removed from a university lab  (more)where it was surplus to requirements. The product has not been tested due to the absence of its power supply, but it is in good condition with minimal signs of wear. Due to the power supply not being included, we are unable to test further. Includes the following untested objectives; Gallenkamp 160/0.17 100 1.25 oil Zeiss Achroplan 10x/0,25 ∞/- Zeiss Epiplan 50x/0,50 44 28 50 Zeiss LD Achroplan 32x/0,40 PH2 ∞/1,5 Zeiss Achrostigmat 5x/0,12 44 01 20

Nikon D-Eclipse C1 System With Melles Griot Accessories This system was removed from a university l (more)ab where it was surplus to requirements. The system powers up but has not been tested further for safety reasons. Included are the following; Nikon D-Eclipse C1-LU3EXMelles Griot 35-IMA-840-019Melles Griot 05-LHP-991Melles Griot 56ICS/S2695Melles Griot 25-LGP-193-230

Singer Instruments MSM System This item was removed from a university lab where it was surplus to re (more)quirements. The model on the specification plate reads as 300, but the screen indicates a 400 model upon powering up. We believe it was upgraded at some point. The system appears to be in working condition, with the motorized stage operating via the joystick and communicating with the touchscreen monitor/computer. The camera and light are functional, allowing a clear view of the testing slide on the screen. The item is in good condition overall, with the exception of a bent piece on the right-hand side (see photo). Included:- Camera: Pixelink PL-B741U - 2 x Eye Pieces: HKW 15x/13 - 2 x Objectives: M20/0.30 240 & 4/0.10 - All necessary cables, including PSU for the monitor

Ultramicrotomo Leica UCT 125. Manufacturing machine knives, table vibration, glass for the manufactu (more)re of blades, and support to make knives. Manual included in attachment. Specifications: - The ultramicrotomo is an instrument commonly used to prepare samples for TEM. Use a glass knife or diamond for cutting ultra-thin sections of specimens included epoxy. - The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width. Were mounted on grids TEM for viewing. - The ultramicrotomo is also used to create a surface mirror-smooth on samples mounted in epoxy, applications for which include images secundariias in the SEM and nanoindexación.

Buchi F-105 recirculation chiller. Optimally designed for use with a rotary evaporator. Temperature  (more)range from -10ºC to 25ºC. Accuracy ±1 °C. Flow rate 2.5 L/min. Tank 3 L. Digital, resolution 0.1 °C. Dimensions: 280*500*420mm. Weight 30kg. 8 mm tubing connection. User manual. The Buchi F-105 recirculating chiller is designed for one rotary evaporator with a cooling capacity of 400 W at 10 °C. It is equipped with a display which enables the connection to a vacuum controller V-850 or V-855 showing the set and actual temperature.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

kuroGEL Verti 1010YK. Refrigerated dual vertical electrophoresis system for two 10*10 cm gels, with  (more)mounting bracket. Includes 2 plain glass plates, 2 cut glass plates, 1 mock plate, 1.0mm spacers, 2 12-well 1.0mm combs, silicone tubing. Connector diameter 4 mm. Recommended voltage 100 - 150 V. User manual. The kuroGEL Verti 1010YK dual refrigerated vertical electrophoresis system has a novel type of clamping that allows it to work with most precast polyacrylamide gels, whether they are 8×10 cm or 10×10 cm and in a wide range of thicknesses. cassette. Two screws simplify clamping without using spacers. Self-sealing push-in connectors prevent spills that commonly occur when disconnecting coolant.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The HX7.4P C is a brand new design comprised of the advanced PUE HX7 indicator, made of stainless st (more)eel, and a powder coated 4-load-cell pallet construction. It is intended for weighing of Euro pallets as well as any transport pallets of 800 × 1200 mm dimensions. The scale enables loading the weighing pan using a forklift. The indicator thanks to its distinguishing features such as a colour 7” graphic display, and a diode bar graph which signals the current load mass referred to the scale range or the declared min and max thresholds, significantly simplifies the operation. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.