Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System Lab

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives This was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. It is made up of the following modules; Carl Zeiss Axioskop El Einsatz Fluorescence MicroscopeModel: AxioskopSerial# : 23 7412 Carl Zeiss Microscope Power Supply VHW 50f-2bModel: VHW 50f-2bSerial#: 39 26 42Lamp hours: 254.24 Carl Zeiss NAG 2, 12V 100W Stab Power SupplyModel: NAG 2 12V 100WSerial#: 39 25 85 Carl Zeiss HBO 50 Lamp housingModel: HBO 50Serial#: 44 72 20 Carl Zeiss 12V 100W Halogen HAL LamphouseModel: 12V 100W Halogen HALSerial#: 44 72 18 Pl 10x/20 Eyepiece x 2 Serial#: 44 40 32 The following Objectives: Zeiss Plan-NEOFLUAR2,5x/0,075 ∞/-Serial#: 44 03 10 Zeiss ACHROPLAN40x/0,65 ∞/0,17Serial#: 44 00 50 Olympus SPlan20PL0,46 160/0,17Serial#: 80 63 58 Zeiss ACHROPLAN10x/0,25 Ph1 ∞/-Serial#: 44 00 31 Zeiss ACHROSTIGMAT5x/0,12 ∞/-Serial#: 44 01 20

This Olympus BX40F-3 Microscope was removed from a university lab where it was surplus to requiremen (more)ts. The unit is in reasonable used cosmetic condition but it does have various marks, scratches and signs of general use. The lamp adjustment slider is snapped off but it can still be operated if you put something thin in the hole(ie small flat screwdriver). Please let us know if this is a major problem for you - we may be able to complete a repair or source a replacement. The microscope has been tested using one of our slides and it appears to work well with all fitted objectives. The system consists of: 1 x Olympus BX40F-3 Microscope body.1 x Olympus U-RLA Reflected Light Vertical Illuminator.1 x Olympus U-SVRS Mechanical Stage.1 x Olympus U-AC Brightfield Condensor.1 x Olympus U-TRU Side Camera Port.1 x Olympus U-TR30 Trinocular Head.1 x Olympus U-TVO.5XC-2 Camera Adapter.1 x Olympus U-SPT Phototube fitted with 1 x Olympus Japan PE 3.3X 125 Objective.1 x Olympus U-PMTVC Camera Adapter.1 x Olympus U-LS30-4 Lamp (new bulb fitted). 1 x Vantage Camera.1 x Q Imaging QICam UV Fast Camera. Both cameras are untested. Microscope has the following 4 objectives fitted: 1 x Olympus Japan 103250 IC10MSPlan100.30∞/- f = 180 1 x Olympus Japan T4-100580 IC20MSPlan200,46∞/0 f=180 1 x Olympus Japan 100DPlan Apo100UV1.30 oil160/0.17 1 x Olympus Japan IC150MDPlan 1500.95∞/0 f=180 It is also fitted with a pair of Olympus WH10X/22 eyepieces.

Olympus BX61 Microscope With BX-UCB And U-HSTR2 Control Units This microscope system was removed fro (more)m a university where it was surplus to requirement. All units are in good cosmetic condition and in good working order. The items included are as follows: 1 x Olympus BX61 Microscope Model: BX61TRF.Serial No 7M25426 1 x Olympus BX-UCB.Serial No. 0D07119 1 x Olympus U-HSTR2.Serial No. 2E16101 1 x Olympus U-LH100-3 Light UnitSerial No. 7J12122 2 x Olympus WHN10x/22 Eyepiece. 1 x PlanApo N 60x/1.42 oil /17/FN26.5.1 x UplanSApo 100x/1.40 oil/17/FN26.5.1 x UPlanFL N 10x /0.30 /FN26.5.1 x PlanApo N 1.25 x/0.04 /FN26.5.2 x data cables

This listing is for a Olympus CH MicroscopeIn 1976, Olympus launched the CH Series, modular biologic (more)al microscope series for practical laboratory teaching applications, in place of the KHS, KHC, HSB, and HSC.

Motic Panthera C2 Binocular Compound Microscope Your Personal Lab Solution If it is about stained se (more)ctions with cover glass protection, about native smears, fine needle biopsies, blood smears that wanted to be treated with or without cover glass: Panthera C2 with its selection of specified optics is your solution. The new Ultra Contrast (UC) objectives with additional glass elements to reach a 22mm Field of View, working perfectly together with neutral eyepieces (thanks to CCIS a fully corrected intermediate image for digital access is granted) guarantee the best performance in terms of color fidelity and contrast. Microscope hardware, illumination, handling: Simply convincing. Functionality is Always Related to the Sample Bright Field is the standard, Phase Contrast, Pol Contrast, objectives with/without cover glass correction, optional LED Fluorescence modules with variable filter combinations: Within Panthera C2 module kit everything is possible for your lab, for your application. The microscope hardware suits to almost any physics of the user, no need to talk about interpupillary distance, viewing angle, or seating position. New UC Optics for New Insights No doubt. The new Plan UC Achromatic objectives, from 2X to 100X magnification range, show significantly improved image contrast. For your individual application: The new 100X/0.8 "Dry objective" is especially favorable in environments where the time-consuming immersion procedure may be considered too complicated. Test it, you are easily convinced. A Field of View of 22mm indicates one more step closer to the High-End level of overview: Your horizon will be enlarged. Flexibility in Illumination The Panthera C2 offers flexibility in light sources. A 30W Halogen bulb can be replaced by a 3W LED of different color temperatures. A Full-Koehler setup for transmitted light is self-evident. Seamless Integration into your Workflow For maximum use of accessories, the Panthera C2 is deeply integrated into Motic's Upright microscope system. The universal turret condenser with all Phase rings and a Darkfield stop, the combination of Polarizer/Analyzer for birefringent samples, LED Fluorescence modules for Epi-Fluorescence: design your workplace according to your demands. We will help you. Click Here to View Product Video INCLUDED: The Motic Panthera C2 Binocular Compound Microscope includes: - Widefield UC-WF10x/20 Eye Piece - 4X/0.10 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 100X/1.25/S-Oil (WD 0.16mm) Objective - Dust Cover - Power Cord - Allen Key - Immersion Oil (5ml) - Blue Filter - Halogen Bulb - LED Module - 5 Year Manufacturer's Warranty

Motic BA210E LED Binocular Compound Microscope w/o 100x Objective Magnification Range 4x to 40x Opti (more)cal System Colour Corrected Infinity (CCIS) Illumination 3W LED Features - Optional intermediate Epi-LED S fluorescence module - Quadruple nosepiece - EC Plan achromatic objectives - Compact rackless stage - Upgradable with phase & pol contrast and simple darkfield - Fixed-Koehler illumination, HAL/LED interchangeability - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) Motic’s BA210E is dedicated to give an answer on basic demands from educational and biomedical laboratory work. The upgraded EC Plan Achromatic objectives in our CCIS© Infinity Concept deliver a fully corrected intermediate image for crisp and clear results within a 20mm Field of View. The rackless stage enables a safe x/y scanning even for the unexperienced user. The complete series of EC Plan Achromatic objectives, from 4X to 100X magnification, is achieving an improved image contrast both for human eye and digital cameras through the photo port. Especially in Phase contrast, the optional objectives (positive & negative Phase) show a remarkable performance for a wide range of applications. The N-WF eyepieces start with the standard 10X/20 mm Field of View and provide a diopter adjustment (+/-5dpt) for both eyes, ready for the use of optional reticles. Motic's BA210E is designed for a demanding daily usage. The rackless stage allows a safe evaluation of samples without prominent gear rack. The standard eyepiece tubes feature a 30° viewing angle for maximum comfort, whereas the interpupillary distance of 55-75mm can easily be adjusted, following individual conditions. The trinocular tube option with a 100:0 / 20:80 light split allows the adaption of digital camera systems and the presentation of microscopic images to a larger public. The BA210E is an integral part of Motic’s BA microscope concept. An upgrade with Phase contrast (positive & negative), Darkfield, Polarization and even LED Fluorescence can easily be performed. The BA210E exceeds the limits of a basic upright microscope, allowing to use contrast methods for specific application fields even in teaching environments with limited resources. INCLUDED: The Motic BA210E LED Binocular Compound Microscope w/o 100x Objective includes: - Binocular head Siedentopf type 30° inclined, 360 ° rotating - Widefield high eyepoint eyepiece N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat Objectives EC PL 4x, 10x, 40x S - Built in low position coaxial rackless stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 3WLED module - 45mm blue filter, immersion oil (5mL), allen hexagonal key, thumb screw, vinyl dust cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

MARSHALL Select MS-PA100UL Autoclavable Pipette, 10-100ul Volume Range 10 to 100ul Increment 1ul Pip (more)ette Type Manual Air Displacement Features - Covers 10 to 100 ul for versatile applications - 1 µl increments for precise volume adjustments - Lightweight and low-force design reduces hand strain - Quick-release pipette tip ejector for easy tip changes - Made from innovative materials for long-lasting use - Serializable at 121°C without special preparation - Works with universal pipette tips for added flexibility The MARSHALL Select MS-PA100UL Autoclavable Pipette is a precision instrument designed for a wide range of laboratory applications, offering a volume range of 10 to 100 µl with 1 µl increments for precise volume control. This pipette delivers systematic error rates of 3% at 10 µl, 1% at 50 µl, and 0.8% at 100 µl, along with random error rates of 1.5% at 10 µl, 0.4% at 50 µl, and 0.15% at 100 µl, ensuring high accuracy and reliability for various tasks. The lightweight, ergonomic design reduces hand strain and minimizes the risk of repetitive strain injuries, making it comfortable for extended use. A centrally located digital display ensures easy readability for both left- and right-handed users, enhancing usability. The rotating counter knob allows for quick volume adjustments, while the quick-release pipette tip ejector facilitates convenient tip changes. Constructed from innovative materials, the pipette is easy to calibrate and maintain, ensuring consistent performance over time. Fully autoclavable at 121°C, the MS-PA100UL allows for thorough sterilization without special preparation, maintaining sterility and performance. After autoclaving, it can be cooled and dried over 12 hours, ready for immediate reuse. The pipette features a volume lock to prevent accidental adjustments and is compatible with universal pipette tips, supporting both forward and reverse pipetting techniques. This versatility makes it suitable for handling a wide range of sample viscosities, from low-viscosity liquids to higher-viscosity or foamy samples. As part of a comprehensive range covering volumes from 0.1 µl to 10 ml, the MS-PA100UL provides flexibility across diverse applications. With its robust construction and user-friendly features, this pipette is an indispensable tool for laboratories seeking precision and efficiency in liquid handling.INCLUDED: The MARSHALL Select MS-PA100UL Autoclavable Pipette, 10-100ul includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator can be equipped with a self-centring weighing pan (extra charge), which significantly minimises the influence of eccentricity during measurements. The self-centring weighing pan eliminates the error of placing the weight "out of pan centre". This solution also enables calibrating weights of different shapes and dimensions without the need to set the positioners for central loading of the mass standard each time. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.

IKA Eurostar 200 Digital Overhead Stirrer Speed Range 0/6 to 2,000 RPM Viscosity Max. 100,000 mPas (more) Stirring Quantity Max. 100 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Extremely powerful laboratory stirrer for highly viscousapplications and intensive mixing for quantities up to 100 l (H2O). Itautomatically adjusts the speed through microprocessor controlled technologywithin the speed range of 0/6 – 2000 rpm (two speed ranges). Safety circuitsinstalled ensures automatic cut-off in an anti-stall or overload conditions.Continuous comparison of shaft speed to desired speed is maintained andvariations are adjusted automatically. This guarantees a constant speed even withchanges in viscosities of the sample.