Siskiyou MXMS-100 Microscope Translator

This Digital Instruments Nanoscope IV Scanning Probe Microscope Controller Model NS41 was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up but has not been tested further at our facility. The lab confirmed it was working when last used. It is in reasonably good cosmetic condition but has some marks from use.

Nikon Eclipse Ni Microscope With Infinity 3 Camera Lab This system was removed from a university whe (more)re it was surplus to requirement. The microscope is in good cosmetic condition and full working order. It is fully operational with both software installed on the included PC. Includes the following: HP Desktop PC with Windows 10.Software installed:- Lumenera Infinity Analyze 7.1.1.66 imaging software. - And MicroManger 2.03. Infinity 3 camera with power supply cable. Objectives: - Nikon Microscope Objective - Plan Fluor 10X/0.30 Ph1 DLL ∞/0.17 WD 16.0 - Nikon Microscope Objective Plan Fluor 20X/0.50 DIC M/N2 ∞/0.17 WD 2.1 - Nikon Microscope Objective Plan Fluor 40X/0.75 Ph2 DLL ∞/0.17 WD 0.72 Eyepieces: - 2 x Nikon C-W10xB/22

Leica CTR 6000 TCS SP5 Laser Scanning Confocal Microscope This system was removed from a laboratory  (more)where it was surplus to requirements. The system powers on, with all units functional, including the stage and light sources. According to the previous owner, the system features a Leica SP5 confocal with 3 PMT and 2 hybrid detectors, along with an FCCS system that includes 2 SPAD detectors. The filters for the detectors are beginning to delaminate and will need replacing. The SP5 computer is relatively new and has been updated to Windows 10. A full environmental chamber for temperature and CO2 control is also included. The system consists of: - TCS SP5 Control Desk, Microscope, and Scan Unit (Serial No. 510000038, Year: 2007) - Leica CTR 6000 Controller (Serial No. 280210) - Leica CMS Detection Unit (Part No. BS054407) - Leica APD Detection (Serial No. 65031) - Leica Scan Head/Trigger Box (Serial No. 0051) - Leica Switch Console V3 (Serial No. 0028960) - Leica Cooling Fan and Flexible Duct (Part No. 1531229001) - Leica Mercury Lamp Box (Type 11307072071/BZ) - LEJ Mercury Bulb Controller (Type ebq 100mc-L, Serial No. 06 2380802161, 217 hours bulb run time) - Leica Stage Controller (Part No. 11505180) - The Box polycarbonate microscope enclosure - The Cube CB02A Enclosure Heater with probe (Serial No. 10585) - The Brick Air Humidity and CO2 Regulator (Serial No. 10654) - Gecomp PC running Windows XP Pro (Serial No. 071362) - HP Z4 PC running Windows 10 (Serial No. CZC026C55L, Product No. 1JP11AV) - 2 x NEC 1990SXi Monitors (Serial Nos. 6Z009731YB, 6Y008209YB) - Cherry Keyboard (Model MY 3000 USB, Serial No. G0006934) - HP KB-1469 Keyboard (Serial No. 803180-L31) - 2 x HP Mice (Part Nos. 672651-001, 458407-002) The microscope is fitted with five objectives: - Leica 784 HCX PL APO 100x/1.4-0.7 oil cs - Leica 510 HCX PL APO 63x/1.4-0.6 oil cs - Leica 214 HCX PL APO 20x/0.70 1MM corr bl - Leica 506251 HCX PL APO 40x/1.25-0.75 oil - Leica 506279 HCX PL APO 63x/1.2 W corr cs Additional components: - Twin binocular eyepieces HC PLAN s 10x/125 M - 7 x colour filter and mirror blocks, 2 x filter block covers - 12 x stage parts - 1 x humidity water cylinder for The Brick Included Software & Manuals: - Leica Software Discs: Confocal Software v. 2.585 (2x), LAS AF v. 2.73-9723, SP5 WS Premium Recovery, SP5 SP8 Standard G4 Recovery W10, SP5 Workstation Recovery - 2 x copies of Windows XP Professional OS - Manuals: Newport PR 50 compact high-speed rotation stage, Coherent Sapphire 488-20 & 410-10 OEM Laser, The Brick operating manual, The Cube 2 temperature controller manual

Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (5x, 10x, 20x) PA Objectiv (more)es APO 5X, 10X, 20X Parfocality Adjustable Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for moulding to different types of research and usage. The PSM1000 is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (5x, 10x, 20x) PA includes: - APO 5X, 10X, 20X Parfocality Adjustable Objectives - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic Panthera C2 Trinocular 50:50 Phase Compound Microscope Package Your Personal Lab Solution If i (more)t is about stained sections with cover glass protection, about native smears, fine needle biopsies, blood smears that wanted to be treated with or without cover glass: Panthera C2 with its selection of specified optics is your solution. The new Ultra Contrast (UC) objectives with additional glass elements to reach a 22mm Field of View, working perfectly together with neutral eyepieces (thanks to CCIS a fully corrected intermediate image for digital access is granted) guarantee the best performance in terms of color fidelity and contrast. Microscope hardware, illumination, handling: Simply convincing.Functionality is Always Related to the Sample Bright Field is the standard, Phase Contrast, Pol Contrast, objectives with/without cover glass correction, optional LED Fluorescence modules with variable filter combinations: Within Panthera C2 module kit everything is possible for your lab, for your application. The microscope hardware suits to almost any physics of the user, no need to talk about interpupillary distance, viewing angle, or seating position.New UC Optics for New Insights No doubt. The new Plan UC Achromatic objectives, from 2X to 100X magnification range, show significantly improved image contrast. For your individual application: The new 100X/0.8 "Dry objective" is especially favorable in environments where the time-consuming immersion procedure may be considered too complicated. Test it, you are easily convinced. A Field of View of 22mm indicates one more step closer to the High-End level of overview: Your horizon will be enlarged.Flexibility in Illumination The Panthera C2 offers flexibility in light sources. A 30W Halogen bulb can be replaced by a 3W LED of different color temperatures. A Full-Koehler setup for transmitted light is self-evident.Seamless Integration into your Workflow For maximum use of accessories, the Panthera C2 is deeply integrated into Motic's Upright microscope system. The universal turret condenser with all Phase rings and a Darkfield stop, the combination of Polarizer/Analyzer for birefringent samples, LED Fluorescence modules for Epi-Fluorescence: design your workplace according to your demands. We will help you.Click Here to View Product Video INCLUDED: The Motic Panthera C2 Trinocular 50:50 Phase Compound Microscope Package includes: - Widefield UC-WF10x/20 Eye Piece - 4X/0.10 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 100X/1.25/S-Oil (WD 0.16mm) Objective - Dust Cover - Power Cord - Allen Key - Immersion Oil (5ml) - Blue Filter - Halogen Bulb - LED Module - 5 Year Manufacturer's Warranty

This BTX Electro Square Porator ECM 830 was removed from a university lab where it was surplus to re (more)quirements. The item powers on and is in reasonably good cosmetic condition, we are unable to test it further at our facility.

F2 Mass Standard - knob weights. Nominal value - 25 kg.

Labconco Fast-Freeze Straight Adapter (Glass)Fast-FreezeFlasks attach with adapters to valve ports o (more)n Labconco Drying Chambers andManifolds. Choose borosilicate glass or stainless steel adapters in 1/2"and 3/4" diameters. Click Here to View Product Video INCLUDED: The Labconco 7545000 Fast-Freeze Straight Adapter (Glass) includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Jenesco Pro-24S Ozone GeneratorThe Pro-24S ozone generator is intended for use incommercial applicat (more)ions, or wherever a high output of ozone is necessary toreduce bacteria, odors, mildew, & mold. It is very powerful, with ozoneoutput potential of up to 24,000 mgph, using the ozone adjustment knob. Ozonegasses are able to penetrate the infected area, attaching itself to themolecules, chemically changing the structure and destroying odors at thesource. The Pro-24 S ozone generator can cover up to 18,000 sq ft for odors,and 6,000 sq ft for mold. It features timed sequences ranging from 15 minutesto 12 hours, but also offers continuous operation simply by using the ‘hold’position on the timer knob. The hour meter registers usage up to 99,999 hours. This 10 lb 20” x 18” x 5” high generator agreat choice for a wide variety of applications. Made in the USA.INCLUDED: The Jenesco Pro-24S Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Corepoint Scientific EF201WWW-0MHC -15C to -25C Hazardous Location Freezer Temperature Setpoint Rang (more)e -15°C to -25°C Capacity 20 Cu. Ft. Defrost Method Manual Features - Meets NFPA and OSHA guidelines for Hazardous Location, Class 1, Division II, Groups C & D, ensuring safe storage environments. - Utilizes ATEX and non-sparking components for enhanced safety, along with R291 refrigerant for efficient cooling. - Features a manual defrost system that helps maintain optimal cooling efficiency, requiring periodic attention to prevent ice build-up. - Provides 20 cubic feet of space, ideal for safely storing flammable or volatile materials with ease. - Equipped with a microprocessor temperature controller and a digital temperature display. - Includes a solid, right-hinged door with a magnetic gasket for a positive seal and a recessed handle. The Corepoint Scientific EF201WWW-0MHC Hazardous Location Freezer is meticulously designed to meet NFPA and OSHA guidelines for Class 1, Division II, Groups C & D environments, making it ideal for use in settings where volatile or explosive conditions may exist. This freezer offers a substantial 20 cu. ft. capacity, housed within a durable powder coat steel exterior, and utilizes a right-hinged, solid door with a magnetic gasket to ensure a robust seal.Equipped with six fixed shelves and recessed handles, this unit facilitates the organized storage of flammable or volatile materials, supported by high-density urethane foam insulation that ensures consistent and reliable temperature control. The microprocessor temperature controller with a digital temperature display allows for precise setting adjustments from -15°C to -25°C, enhancing the maintenance and recovery processes compared to traditional mechanical thermostats. INCLUDED: The Corepoint Scientific EF201WWW-0MHC -15C to -25C Hazardous Location Freezer includes: - 6 Fixed Shelves - Key for Door Lock - Operator's Manual - 2 Year Manufacturer's Warranty

The combination of 10x and 20x high grade wide field eyepieces with the 2x and 4x occulars make poss (more)ible the range of 20x to 80x magnification. Magnification Power: 20 → 80X Illuminated: Yes Illumination Type: Halogen Battery Operated: Yes Battery Type: 3 x AA Weight: 2.3kg Dimensions: 139 x 200mm