Olympus 201707 Pol Pos Antique Microscope with Polarizer

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Leitz Dialux 22 Fluorescence Microscope with Camera + Control Unit This system was removed from a un (more)iversity lab where it was surplus to requirements. The unit does not power up. We have tested the continuity and found no issues, but we are unable to find the cause of the issue. The power supply for the lamp is a visual PAT test fail due to exposed wires and also does not power the lamp. Due to the faults listed above, this system is listed as Spares/Repair. The system comprises the following:- Leitz Vario Orthomat Controller - Leitz Power Supply for Lamp - Leitz Vario Orthomat 2 Camera - Leitz Wetzlar 100W Lamp (Type: 307-143.003) 5 x Objectives:- NPL Fluotar 6.3/0.20 - NPL Fluotar 16/0.45 - NPL Fluotar 40/0.70 - Leitz EF 63/0.85 - Leitz PL 2.5/0.08 2 x Leitz Eyepieces Periplan GW 10x MModel: Dialux 22-

Euromex MicroBlue MB.1051-LCD digital microscope with 5.6 inch fixed LED display. Achromatic objecti (more)ves 4/10 / S40x DIN 35 mm, mechanical stage and LED lighting. The modern MicroBlue are high-quality entry-level microscopes, especially suitable for beginners or education, capable of withstanding intensive use and manipulation by non-expert users. 5.6 inch LCD screen with 640 x 480 pixels with built-in SD card for saving of images in jpeg format. Video resolution of 640 x 480 pixels, saving in AVI format. Nosepiece for 4 objectives. Ball-bearing mechanism and click-stops Achromatic 4x N.A. 0.10, 10x N.A. 0.25 and S40x N.A. 0.65 DIN 35 mm parfocal objectives. The S40x objective is spring-mounted. Square stage 115 x 100 mm with 55 x 22 mm X-Y translation stage. Coaxial coarse and fine adjustments with 200 graduations. Precision 15 μm, 3 mm per rotation. Total travel approximately 15 mm. Friction adjustment. Friction of focus control can be adjusted. N.A. 1.25 condenser with iris diaphragm and filter holder. 1 W LED illumination with intensity control, rechargeable batteries with external power supply/charger. Supplied with USB-2 cable, manual and dust cover in styrofoam case.

Chloride Portable Photometer HANNA HI96753 New equipment in its original packaging Chloride Range :  (more)0.0 a 20.0 mg/L (ppm) Chloride Resolution : 0.1 mg/L (ppm) Chloride Accuracy : ±0.5 mg/L ±6% de la lectura Chloride Method : Adaptación del método de tiocianato de mercurio (II) Total Chlorine Range : 0.000 to 0.500 mg/L Total Chlorine Resolution : 0.001 mg/L (ppm) Total Chlorine Accuracy : ±0.020 mg/L ±3% of reading Chlorine Method : adaptation of the USEPA method 330.5 Photometer/Colorimeter Light Source : tungsten lamp Photometer/Colorimeter Light Detector : silicon photocell with narrow band interference filter @ 525 nm Battery Type/Life : 9V battery Automatic Shut-Off : after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder Environment : 0 to 50°C (32 to 122°F); RH max 95% non-condensing Weight : 360g (12.7oz.) Dimensions : 193 x 104 x 69 mm (7.6 x 4.1 x 2.7”)

This Leitz Laborlux K Binocular Microscope was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks and scratches from where stickers had been removed. Head - 512 661 2 x Eye Pieces -Periplan 10 x / 18 (519 748) 4 x Objectives:-160/- EF 10/0.25 (519760)160/0.17 EF 40/0.65 (519762)160/0.17 EF 100/1.25 OEL (519804)160/- EF 4/0.12 (519759) Condenser Head - 0.90ASS1.1 (513548)Condenser Swing top (513547)

This Thermo Spectronic Genesys 10 VIS UV/VIS Spectrometer was removed from a university lab where it (more) was surplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 492.06

F2 Mass Standard - knob weights, wooden box. Nominal value - 2000 kg.

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.