Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (5x, 10x, 20x)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This was removed from. a university lab where it was surplus to requirements. It seems there are som (more)e parts missing. What is included is listed below; Table/Rack on wheelsDimensions - L111 W70 H62cm Fitted inside:-Carl Zeiss ECU-LSM 5 Live PC - Powers on but the Hard drive has been removed. Carl Zeiss LSM 510 META Laser Head Casing - The casing is in bits and it looks like there are parts missing Carl Zeiss Remote for LSM 510 R3.5/LSM 5 Live Box full of all the connection cables Keyboard & Mouse Box of small parts/accessories including:-Software discs and Fujitsu Recovery DVD'sCarl Zeiss MicroImaging LSM 510 META 4.0 Software DongleSeveral USB CablesLots of small parts/accessories

This Leica MZ95 High-Performance Stereomicroscope was removed from a university lab where it was sur (more)plus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. It has been tested and appears to work as it should. Note there is no cable or PSU to power the attached Leica L2 gooseneck lamps. These have not been tested. The microscope is fitted with the following parts: 1 x Leica 10445619 AS Binocular head.Fitted with 2 x Leica 10445111 10x/21B eyepeices. 1 x Leica 10 446272/5092251 Optics Carrier.Fitted with the following objectives: 0.63x0.8x1.0x1.25x1.6x2.0x2.5x3.2x4.0x5.0x6.0x It is also fitted with a: Leica 10 445 819 Planachromatic 1.0x lens. NOTE: The circuit board shown is for demo purposes only!

Nikon SMZ1000 Microscope This was removed from a university lab where it was surplus to requirements (more). The unit is in working order, but has no base. It is in good cosmetic condition with minor marks. 1 x Nikon SMZ1000 MicroscopeParts:-2 Eyepieces - C-W10xB/22Plan Apo 1x WD 70Model - C-FMC (1013443)LV-TVCamera W159P (00529)TV Lens C-0.38x DN

This Philips XL20 SEM Electron Microscope was removed from a university lab where it was surplus to  (more)requirements. The unit is in good cosmetic condition. Due to various components not being included, we are unable to test this item, and therefore it's sold as Spares or Repairs.

Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Oil Bath, and Selectable Glassware, 115V Sp (more)eed Range 5 to 315 RPM Evaporation Capacity Up to 23 ml/min Pressure Setting Range 0 to 1013 hPa Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with vacuum controller and a slide jack mechanism for convenient height adjustment. Set includes the VR102S Vacuum Controller, BO302-A Oil Bath, and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Oil Bath, and Selectable Glassware, 115V includes: - Glassware Set Selected Above - VR102S Vacuum Regulator - BO302-A Oil Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

M1 Mass Standard - knob weights - set (1 mg - 5 kg), wooden box.

Scales indispensable in doctors’ offices, clinics and hospitals The baby scale is a precise el (more)ectronic weighing equipment manufactured in class III and intended to weighing infants. It is available as dual-range instrument. Baby scales are used in health care facilities such as doctors’ offices, clinics and hospitals. A matter of great weight Controlling an infant’s weight is very important, and failure to do so can have a negative impact on the child’s future life. Both too fast and too slow infant weight gain carry the risk of many diseases and health problems, including – on the one hand – childhood obesity, and on the other – motor or psychological disorders. Modern baby scales are much more accurate than they used to be – the readability of the best baby scales manufactured by RADWAG is 2 g. In addition, since a small child rarely lies still, the scale on which it is weighed should have electronic solutions and filters that allow precise measurement. Childishly simple weighing Weighing on a baby scale manufactured by RADWAG is child’s play. Why? First of all, today’s baby scales are light and mobile, allowing them to be carried anywhere. Other conveniences in them include: the ability to run on battery power for up to 8 hours, transfer data directly to a computer and tare, for example, when weighing with a diaper or sanitary pad. What’s more, the backlit display makes it readable from many angles. Also, the weighing pan, on which the infant is weighed, is properly contoured and tilted at the right angle for ergonomic and safe weight measurement. It has been with us for years, and will stay for a long time to come The baby scale is equipped with a SYNTHOS PS HI 945E polystyrene weighing pan as well as PUE C315 terminal comprising a backlit LCD display and a 5-button keyboard for simple operation of basic scale functions. The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the baby scale allows up to 8 hours of operation without mains power! Use the potential Receipt printers, power adapters, displays – thanks to multipurpose software, the baby scale can work with all of them. As standard, it is equipped with an RS232 cable to which you can connect most of the accessories from our range. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased.

M1 Mass Standard - knob weights. Nominal value - 200 kg.

Gilson PIPETMAN G P1000G, 100-1000 µL, Metal Ejector PipetteFeatures - Made of PVDF and stainless st (more)eel, PIPETMAN Goffers premium durability - One of the lowest pipetting forces commercially available - redesigned piston assembly system and high-quality piston grease,PIPETMAN G guarantees hours of comfortable pipetting. - N G clipejector allows for convenient access to serviceableparts. - Pipettes come in either single or multichannel models equipped with metaltip ejectors - Volume range of 100 to 1000µL - 3 year manufacturer's warranty - Optional accessories allow for greater comfort while pipetting - Multi-colored heads allow for quick and easy pipette exchange PIPETMAN® G brings a new level of comfort into Gilson range with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. PIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting. PIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Made of PVDF and stainless steel, PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G P1000G, 100-1000 µL, Metal Ejector Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty