Motic GM-171 Trinocular Gemology Stereo Microscope

This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault. The (more) university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)" From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC. The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either. When starting the Leica PC program it shows the following message: "AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller. The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result. It is sold for spares/repairs. Please note that the marble table in the photos was retained by the lab.

This Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System was removed from a u (more)niversity lab where it was surplus to requirements. All parts are in good used cosmetic condition but they do have signs of general use. We have powered it all up and the system appears to function as it should. We were able to view a slide via the software on the PC. It is an excellent system and is in full working order. It has been professionally serviced. The comments from the service engineer are below. It appears to be in good working condition but we have no way of checking the laser. The internal halogen works fine and so does the external metal halide illumination. Objectives UPlanFl 4x/0.13 ∞/- UPlanFl 10x/0.30 ∞/- LCPlanFl 20x/0.4 ∞/- LCPlanFl 40x/0.60 ∞/- Diagnostic Inst 1x C Mount adaptor. Some evidence of bleaching of fluorescence filters. The system consists of: 1 x Olympus IX50 Microscope Modified by Arcturus.With PixCell IIE LCM2016 Laser System (Manufactured September 2002).The microscope is fitted with:2 x Olympus WH10X/22 Eyepieces. Olympus Objectives: 1 x OlympusLCPlanFl40x/0.60∞/ 1x OlympusLCPlanFl20x/0.40∞/ 1 x OlympusUPlanFl10x/0.30∞/ 1x OlympusUPlanFl4x/0.13∞/- 1 x ZEISSPlan-NEOFLUAR40x/0.75∞/0.17(not fitted in the microscope). 1 x Dell Dimension 3000 PC with keyboard, mouse & monitor.The PC has Arcturus ARC200 software installed and is fitted with a PCi card interface for the Hitachi camera. 1 x Olympus BH2-RFL-T3 Lamp PSU.It is showing 71.2 lamp hours. 1 x Olympus U-ULS100HG 100w lamp 1 x Hitachi KP-D590P CCD Color Camera. 1 x Camera Remote Unit. 1 x Arcturus PixCell IIe Control Unit. 1 x MARX Crypto-Box. 1 x Arcturus 12109-00D Sample holder. Various cables to connect the whole system. Manuals.

ZEISS PALM CombiSystem Axiovert 200M, XE120-XL,HV-D30P w/ Parts & Accessories This was removed f (more)rom a university lab where it was surplus to requirements. The system powers up and the microscope is in good working order. We had some issues controlling the camera and the stage during testing, but this may be due to user error. With the Palm RoboSoftware V4 we can control the following microscope features: - Stage Y Axis movement - Stage X Axis movement - Objective Motor (able to select objective) - Increase/Decrease Light - Change Light Source - Raise/Lower Objective It is in excellent cosmetic condition with minor marks. Included are the following; Carl Zeiss Axiovert 200MModel: Axiovert 200MSerial#: 3820005950Objectives fitted:Zeiss Fluar 5x/0.25Zeiss Fluar 10x/0.50Zeiss LD Plan-Neoflaur 20x/0.40 CorrZeiss LD Plan-Neoflaur 40x/0.60 CorrZeiss EC Plan-Neoflaur 63x/1.25 Oil M27Zeiss EC Plan-Neoflaur 100x/1,30 Oil Eyepieces:W-PL 10x/23 (Qty.2) P.A.L.M Microlaser Technologies Model: PALM CombiSystemSerial#: CSC-01010Date: 2007 Fujitsu Siemens Celsius R630 PC, Fujitsu Siemens SCIENVIEW B17-2 C CI Monitor (QTY.2) Fujitsu Siemens Keyboard, MouseModel: Celsius R630Serial#: YKFU009307 Both Monitors, PC, Keyboard and Mouse are in good cosmetic condition and power on with no issue.PC has the following software installed:Palm RoboSoftware V4 Hitachi HV-D30 CameraModel: HV-D30PSerial#: 0675280 Laser Quantum LD3000 power supplyModel: ForteSerial#: 02165p                                                   Zeiss CryLaS FTSS 355-50Serial#: B594C279 Item powers on and is in full working order.Communicates with control panel and microscope. EXFO X-Cite Series 120Model: XE120-XLSerial#: 0570 Item is in good cosmetic condition.Item powers on with light source in full working order. All items listed above are sat on a Melles Griot Optical Table with PALM CombiSystem being fixed to it.Measurements and weight of Melles Griot Optical Table are as follows:Dx120Wx90Hx77cmWeight: Additional Parts & Accessories: Zeiss AdhesiveCap 500 ClearPALM MembraneSlidesPALM CombiSystem C User ManualsPALM DishHolder 50 CPALM MultiCap Insert 8cPALM MultiCap Collector D 8C (Qty.2)PALM CollectorSet SingleTube II 500PALM CombiSystem User manual (Qty.2)PALM RoboSoftware Software Guide (Qty.2)Laser Quantum Forte Operating ManualPALM MicroBeam Technical InformationZeiss Axiovert 200 Operating ManualZeiss DuplexDish 50 Sterile Packed (Qty.6)LumoxTM Dish 50 Hydrophilic, Sterile (Qty.5)Zeiss MembraneSlide 1.0 PenX-Cite In Control Series 120 User's GuideZeiss PALM RoboSoftware CDPALM MicroLaser System RoboSoftware 4.0 CDFujitsu Siemens Product Recovery CDCarl Zeiss 29 Software Release 4.6Zeiss Axiovert 200 M/Mat Floppy Disc3-CCD Color Camera Model HV-D30 Operating ManualFujitsu Siemens Celsius Drivers & Utilities CDScenview B17-2 CI / B19-2 CI

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 6x4 Stage Objectives 5X, 10 (more)X, 20X, 50X CCIS BD Plan Achromatic & S-Apo (Pb free) DIN (for Brightfield and Darkfield) Optical System Colour Corrected Infinity Optical System (CCIS) Illumination 3W LED Epi-Illumination Features - Panthera TEC models include brilliant optics and smart functionality for extended ease of use. - Features Smart Darkfield with 5 Segment illumination mode. - New LD Plan Achromatic and S-Apochromatic BD objectives & 22mm FOV eyepieces. - Pure incident or incident/ transmitted microscope stands available. - 3W LED of selectable color temperature for incident illumination. - Motic LightTracer: Coded nosepiece & Digital light intensity knob. The Panthera TEC offers high value for the inspection of semiconductors and compound materials, especially in industrial quality control and technical education. Brightfield, Darkfield and Cross Polarization contrast are combined with a new, unique-to-Motic segmental illumination that all contribute to the versatility of this model. This concept allows an oblique incident illumination, perfect for the detection of scratches or other defects on flat and reflecting surfaces without a need to move the sample. BD models feature LD Plan BD objectives with a superb imaging performance, mounted on a 5-fold nosepiece. The light intensity for each objective position is automatically memorized and will be repeated once the objective is swung in again. The compact Epi illuminator carries a slot for polarizer and analyzer, ready for Polarization contrast and to reduce internal reflections. The illuminator also includes the controls for varying the incident light in terms of mode (BF or DF) and illumination angle.INCLUDED: The Motic Panthera TEC-BD/DF/RL Trinocular Upright Industrial Microscope, 6x4 Stage includes: - 5X/0.13 (WD 17.3mm) - 10X/0.25 (WD 16.3mm) - 20X/0.40 (WD 7.3mm) - S-Apo 50X/0.80 (WD 1mm) - Dust Cover - Allen Key - Screws for Metal Extension Support - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Product Features: Varied Standards: The set consists of 12 wire standards and 15 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 2 brushes and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are wires. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

Scilogex Circular Tube Holder for 50ml x 8 TubesThe Scilogex Circular Tube Holder accommodates 8 x 5 (more)0ml tubes. For use with the Mx-RD-Pro LCD Digital Tube Rotator. INCLUDED: The Scilogex Circular Tube Holder for 50ml x 8 Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment EPB 363E Equinox Precision Balance, 360g, 0.001g Capacity 360g Readability 0.001g Re (more)peatability 0.6mg Features - Large, responsive 5’’ 800x480 pixel touch-screen display - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - RS-232 interface provides speedy connection to computers and printers - USB host for memory card - Built-in memory for storing products and settings - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Security password control prevents unauthorized access - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Preset tare function speeds the process of repetitive weighing - Parts counting with freely selectable sample sizes - Multilingual display allows use in many different countries - Memory accumulation totals results - Check weighing with audible alarm The Adam Equipment Equinox Precision Balances deliver remarkable precision to labs that perform highly detailed testing. The Equinox is ideal for research and quality assurance facilities; science education; precision counting; and production and manufacturing applications needing exceptionally precise results. Twelve precision models offer capacities from 360g to 8200g and readabilities of 0.001g and 0.01g. A color touch screen display provides intuitive operation, with icon-driven menus and readily accessible applications and functions. The five-inch screen is generously sized, offering 800 X 480-pixel resolution for excellent visibility. INCLUDED: The Adam Equipment EPB 363E Equinox Precision Balance, 360g, 0.001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Dimensions (HxWxD): 620 x 575 x 520 mm Internal dimensions (HxWxD): 580 x 535 x 455 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW