Motic BA410E Binocular Sextuple Compound Microscope - Pathology Package

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Head: Double Binocular Eyepiece: Zeiss Kpl 10x/18 Objectives: 2.5x/0.08, 10x/0.22, 40x/0.65, 100x/1. (more)25 Oil Final magnifications: 25x, 100x, 400x, 1000x Nosepiece: Quadruple Focusing: Coaxial coarse and fine control knobs Illuminator: 12V Halogen illuminator

Eyepiece: WF 10x/20mm Head: trinocular Objectives: DIN Semi Plan 4x, 40x, 100x Magnification: 40x, 4 (more)00x, 1000x Focusing: coaxial coarse and fine adjustment on both sides Condenser: Abbe condenser N.A. 1.25, tension-free with iris diaphragm Lighting: integrated, adjustable halogen lighting 6 V/30 W

Leica Diavert Inverted Microscope w/ 4 x Objectives & 465 Power Supply This was removed from a u (more)niversity lab where it was surplus to requirements. The unit is in reasonably good cosmetic condition. There are some light tape marks from general use, as well as some patina from age. It is in good working order. Included are; 1 x Leitz Phaco A 0.25 L62 Lamp 2x Eyepieces:PERIPLAN GF 12.5x /20 M lietz Wetzlar Germany 4x Leitz Wetzlar Objectives: 1x 170/- 4/0.121x 170/- L32/0.4 Phaco 11x 170/- L20/0.32 Phaco 11x 170/- 10/0.25 Phaco Power Supply:Model. 465

This Digital Instruments Nanoscope IV Scanning Probe Microscope Controller Model NS41 was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up but has not been tested further at our facility. The lab confirmed it was working when last used. It is in reasonably good cosmetic condition but has some marks from use.

Mini gel transblotter for 1 to 4 mini gels 10 x 10 cm APELEX New equipment in its original packaging (more) Reference: 430000 Mini Trans Blotter for 4 gels 10x10cm Comes with 4 cassettes and 8 scotch brite

Dimensions (WxDxH): 140 x 140 x 650 mm Compartment dimensions (WxDxH): 135 x 135 x 75 (x8) mm

Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C,  (more)5200W, 230V 60HzDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5200W, 230V 60Hz SpecificationsKey SpecificationsDescription1.5 HP Chiller, Positive Displacement; Air-CooledDisplayLEDConnectivityOptional: RS232, RS485Working Temperature Range °C5° to 35°Temperature Stability °C±0.5°Temperature Calibration Capability1-pointPump TypePositive Displacement 60 Hz OnlyPart Number6860P46A270DMaximum Pressure (psi)100.0Maximum Pressure (bar)6.90Maximum Pressure Flow Rate (gpm)3.50Maximum Pressure Flow Rate (l/min)13.2Cooling Capacity @ +10°C (W)4420Cooling Capacity @ +20°C (W)5200Cooling Capacity @ +30°C (W)5980Heater Wattage1000Electrical Requirements (VAC/Hz/Ph/A)230/60/1/21.1Regulatory ApprovalsTUVDownloadsTechnical Specification Download Operator's Manual Download

Binocular microscope bScope BS.1152-PLHi, eyepieces HWF 10x / 20 mm quintuple nosepiece with the pha (more)se of plan PLPHi 10/20 / S40 / S100x infinite oil corrected objectives, stage 131 x 152/197 mm with mechanical built-in 77 x 36 stage X-And without rack mm Condenser phase contrast Zernike with iris diaphragm and filter holder.3 W NeoLED ™ Kohler illumination and integrated power supply. Supplied without rechargeable batteries. Eyepieces HWF 10x / 20 mm Head binocular, type Siedentopf, tube inclined 30 °. Interpupillary distance 48-75 mm diopter Adjustment on the left pipe Nosepiece revolving quintuple reversed in ball bearings Plan of phase PLPHi 10x, 20x, S40x, oil immersion S100x infinity corrected IOS objective for phase contrast All the optics are coated with antifungal treatment and anti-reflective for maximum lightweight performance Settings coaxial coarse and fine with 180 graduations. Precision 1.1 µm, 0.2 mm per rotation. Total distance of approximately 18 mm Tojuste friction Stage without a frame of 131 x 152/197 mm with mechanical mechanism 77 x 36 mm scenario without rack Condenser Zernike height adjustable N. To 1.25 with diaphragm & filter iris Kohler Illumination 3 W NeoLED ™. Internal power supply 100-240 V (CE) Supplied with power cable, dust cover, immersion oil 5 ml in case of polystyrene foam and without AA rechargeable batteries

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interface RS232. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.