Motic BA210 LED Digital Compound Microscope

Prior Model. PX042 Compound Trinocular Microscope With Four Objectives Lab This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

Prior Optiscan ES9Z Microscope Stage Controller with CS152Z This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Included with it are;1 x Rotary wheel control module with up, down and speed buttons. Model CS152Z Serial No. 363411 x 12v power adapter

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requir (more)ements. Included are; 1x Olympus FluoviewModel FV1000 The unit is in good cosmetic condition, but the power cables were missing so it has not been tested. The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed. 1x Olympus Transmitted Light Detector:Model FV10-TDThe unit is in good cosmetic condition. 1x Olympus Control Box:Model IX2 UCBThe unit powers on and is in good cosmetic condition. 1x Olympus Power Supply:Model FV10-PSUThe unit powers on and is in good cosmetic condition. 1x FV10-PSU Key:Model 1201 The unit is in good cosmetic condition. 1x Olympus Hand-switch:Model U-HSTR2The item powers on and is in a reasonable, used cosmetic condition. 1x Olympus Laser Diode Interface Controller:Model FV10-LDIFThe unit is in good cosmetic condition. The PSU is missing. 1x Olympus Power Supply:Model U-RFL-T200Life Time: 3667 hoursThe unit powers on and is in good cosmetic condition. It is not known if the Burner has been replaced after 200 hours. 1x Olympus Mercury Light Source:Model U-LH100GThe unit powers on and is in good cosmetic condition. The Lamp is working. 1x Olympus Light Source StandModel FV10-FIRThe unit is in good cosmetic condition. There are some scuffs and scratches from general use. 1x Olympus Power Supply:Model FV5-LDPSURunning hours: 79335.3 The unit powers on and is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units. 1x FV5-LDPSU Olympus Power Supply Key:Model 1201The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply. 1x Olympus Laser HeadModel LD405The unit is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply. 1x IW-R3000N Rack Mountable Server ChassisThe unit powers on and is in good cosmetic condition. Accessories: 1x Olympus objective correction capModel CAP-G0.5 ± 0.5The unit is in good cosmetic condition 1x Olympus Laser safety shutterModel F10-SHAUXThe unit is in good cosmetic condition. 1x Olympus Goose neck fibre optic light pipesModel LGS3F1200UVThe unit is in good cosmetic condition. Spacers: 2x L3cm xW3cm xH0.5cm 2x L4cm x W4cm x H0.5cm The units are in good cosmetic condition. Misc Accessories: 1x IW-R3000N Rack Mountable Server Chassis User manual V2.11x Microsoft Windows 2000 XP professional Inst/uninst CD1x Belkin Serial Adaptor 1x RCA Phono male to male cable (sealed)1x SATA Cable (C13214-001 FOXCON 0550)1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable 1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor1x RCA Female to mini DIN 8-PIN connector (sealed)1x VGA to DVI connector (sealed) Installation discs:2x Belkin USB Adaptor Installation1x Intel Express installer1x Sapphire installation driver 1x mini disc

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System Common Applicatoins Semic (more)onductor Analysis, and Laser Based Research Methods Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage. - Trinocular tilting head 3°-30° provides ease of use across a variety of applications. The PSM1000E is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System includes: - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

FB Fans & Blowers Ltd Centrifugal Fan Type 400 (350) SBSZ100 This was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and is in full working order to 3250rpm It is in good cosmetic condition with minor marks.

Set of 2 clips for 250 ml Erlenmeyer For universal platform/stirrer Gross weight: 0.132 kg Gross dim (more)ensions: 15 x 13 x 8 cm

Vortex stirrers with Ohaus microplate The high speed and small orbit make these mixers perfect for m (more)ixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Microplate support (Single) (code 30400215) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Communication N / A Structure Cycoloy Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

Yamato BO-302-A Digital Oil Bath 5L, 100-115V Water Tank Capacity 5L Operating Temperature Range  (more)Ambient +10-180°C Temperature Accuracy ±2°C Features - White LED digital display, key entry, minimum digit of 1°C - Flat-shaped bath with no heater or sensor inside makes for ease in cleaning - Full range of safety functions - Includes automatic overheat prevention - Comes with 1 Year Manufacturer's Warranty