Motic B1-253SP LED Binocular Compound Microscope

ZEISS PALM CombiSystem Axiovert 200M, XE120-XL,HV-D30P w/ Parts & Accessories This was removed f (more)rom a university lab where it was surplus to requirements. The system powers up and the microscope is in good working order. We had some issues controlling the camera and the stage during testing, but this may be due to user error. With the Palm RoboSoftware V4 we can control the following microscope features: - Stage Y Axis movement - Stage X Axis movement - Objective Motor (able to select objective) - Increase/Decrease Light - Change Light Source - Raise/Lower Objective It is in excellent cosmetic condition with minor marks. Included are the following; Carl Zeiss Axiovert 200MModel: Axiovert 200MSerial#: 3820005950Objectives fitted:Zeiss Fluar 5x/0.25Zeiss Fluar 10x/0.50Zeiss LD Plan-Neoflaur 20x/0.40 CorrZeiss LD Plan-Neoflaur 40x/0.60 CorrZeiss EC Plan-Neoflaur 63x/1.25 Oil M27Zeiss EC Plan-Neoflaur 100x/1,30 Oil Eyepieces:W-PL 10x/23 (Qty.2) P.A.L.M Microlaser Technologies Model: PALM CombiSystemSerial#: CSC-01010Date: 2007 Fujitsu Siemens Celsius R630 PC, Fujitsu Siemens SCIENVIEW B17-2 C CI Monitor (QTY.2) Fujitsu Siemens Keyboard, MouseModel: Celsius R630Serial#: YKFU009307 Both Monitors, PC, Keyboard and Mouse are in good cosmetic condition and power on with no issue.PC has the following software installed:Palm RoboSoftware V4 Hitachi HV-D30 CameraModel: HV-D30PSerial#: 0675280 Laser Quantum LD3000 power supplyModel: ForteSerial#: 02165p                                                   Zeiss CryLaS FTSS 355-50Serial#: B594C279 Item powers on and is in full working order.Communicates with control panel and microscope. EXFO X-Cite Series 120Model: XE120-XLSerial#: 0570 Item is in good cosmetic condition.Item powers on with light source in full working order. All items listed above are sat on a Melles Griot Optical Table with PALM CombiSystem being fixed to it.Measurements and weight of Melles Griot Optical Table are as follows:Dx120Wx90Hx77cmWeight: Additional Parts & Accessories: Zeiss AdhesiveCap 500 ClearPALM MembraneSlidesPALM CombiSystem C User ManualsPALM DishHolder 50 CPALM MultiCap Insert 8cPALM MultiCap Collector D 8C (Qty.2)PALM CollectorSet SingleTube II 500PALM CombiSystem User manual (Qty.2)PALM RoboSoftware Software Guide (Qty.2)Laser Quantum Forte Operating ManualPALM MicroBeam Technical InformationZeiss Axiovert 200 Operating ManualZeiss DuplexDish 50 Sterile Packed (Qty.6)LumoxTM Dish 50 Hydrophilic, Sterile (Qty.5)Zeiss MembraneSlide 1.0 PenX-Cite In Control Series 120 User's GuideZeiss PALM RoboSoftware CDPALM MicroLaser System RoboSoftware 4.0 CDFujitsu Siemens Product Recovery CDCarl Zeiss 29 Software Release 4.6Zeiss Axiovert 200 M/Mat Floppy Disc3-CCD Color Camera Model HV-D30 Operating ManualFujitsu Siemens Celsius Drivers & Utilities CDScenview B17-2 CI / B19-2 CI

This Zeiss Axiovert 25 Inverted Fluorescence Phase Contrast Microscope was removed from a university (more) lab where it was surplus to requirements. The unit powers up and all the objectives appear to focus well. It is in good cosmetic condition with only minor marks from use. There are 2 x Objectives included, and they are as follows; Zeiss LD Achrostigmat 32X/0.40 ∞/0.5-1.5 Ph1 Zeiss CP-ACHROMAT 10x/0,25 ∞/- PH1 Eyepieces: 2 x E-Pl 10x/20

Zeiss Planapo 63x/1.4 Oel Microscope Objective 461841-9901 The unit is in good cosmetic condition bu (more)t has not been tested.

Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED Objectives UC  (more)Flour 4X, 10X, 20X, 40X, 100X Optical System Colour Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Upright with auto EDF focusing and motorized Z-axis (30mm stroke). - Equipped with a 6-channel turret and high-powered LUMOS LED for superior fluorescence illumination. - Delivers high color fidelity and resolution with a 23mm FOV. - Utilizes Colour Corrected Infinity Optical System (CCIS®) for superior clarity and color fidelity. - Features Plan UC Fluor objectives for ultra-flat, high-contrast imaging, ideal for UV-Visible fluorescence. - Includes two empty filter cubes for customizable application needs. - Allows precise focus adjustment for both eyepieces. - 4X to 100X, accommodating various magnification needs. - LUMOS FL LED provides over 20,000 hours of operation. The Motic PA53 FS6 EDF is a high-end fluorescence life-sciences trinocular microscope equipped with a 6-channel fluorescence turret, featuring pre-mounted DAPI, FITC, and TRITC filter cubes, plus two user-configurable empty filter cubes. Its superior optics deliver high color fidelity and resolution, with a 23mm field of view. The PA53 FS6 EDF boasts a reflective fluorescence illumination system with a powerful LUMOS LED and a transmitted 100W Halogen light source. INCLUDED: The Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED includes: - UC Flour 4X, 10X, 20X, 40X< 100X Objectives - Motic Fluorescence Imaging Software Plug-In - Wide-field eyepiece 10X/23mm - Motic Images Plus 3.0 Software - Kohler Collector, N.A 0.9/1.25 - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Polyscience MX06S135-A11B 6L Stainless Steel Open Bath, MX (Ambient +10 to 135C), 120V, 60HzFeatures (more) - Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video INCLUDED: The Polyscience MX06S135-A11B 6L Stainless Steel Open Bath, MX (Ambient +10 to 135C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PSM / ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m microbiological safety cabinet New equipment in its orig (more)inal packaging Complete pack including: PSM ESCO Airstrem plus class II AC2-5E8-TU length 150cm (1.5m) A UV-30A UV lamp A fixed support with leveling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm report Dual economical motors ensuring permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined underplane for liquid retention LED lighting Control panel with clear flow display, window position Silent operation The PSMs are equipped with 2 electrical sockets and a UV lamp Depth without armrests: 767 mm / with armrest: 823 mm Motorized front window, stops at the working position External stainless steel armrest on the entire front part Nominal size: 1.5 m External dimensions: 1645 x 767 x 1400 mm (L x D* x H) Internal dimensions: 1525 x 580 x 654 mm (L x D x H) External depth without / with armrest: 767 / 823 mm Weight: 293 kg Model: AC2-5E8-TU Gross weight: 309 kg Gross dimensions: 172 x 90 x 174 cm The sheet metal slide covers are slightly deformed at the bottom, but this does not hinder the proper operation of the PSM or the opening and closing of the window Year of manufacture: 2016

Prior PX042 Compound Microscope With Four Objectives Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22