Motic B1-253ASC LED Binocular Compound Microscope

Olympus BX40 Microscope Without Stage Lab This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility due to it not including a stage to hold the sample slide. All units included are as follows; 1 x Olympus BX40 MicroscopeModel BX40F4. Serial No. 9F13549 1 x Olympus UPlanFl 10x/0.30.1 x Olympus UPlanFl 100x/1.30 oil /0.17.1 x Olympus UPlanFl 60x/1.25 oil iris /0.17.1 x Olympus WH12.5x/16 Eyepiece.

Nikon SMZ1000 Microscope This was removed from a university lab where it was surplus to requirements (more). The unit is in working order, but has no base. It is in good cosmetic condition with minor marks. 1 x Nikon SMZ1000 MicroscopeParts:-2 Eyepieces - C-W10xB/22Plan Apo 1x WD 70Model - C-FMC (1013443)LV-TVCamera W159P (00529)TV Lens C-0.38x DN

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requir (more)ements. Included are; 1x Olympus FluoviewModel FV1000 The unit is in good cosmetic condition, but the power cables were missing so it has not been tested. The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed. 1x Olympus Transmitted Light Detector:Model FV10-TDThe unit is in good cosmetic condition. 1x Olympus Control Box:Model IX2 UCBThe unit powers on and is in good cosmetic condition. 1x Olympus Power Supply:Model FV10-PSUThe unit powers on and is in good cosmetic condition. 1x FV10-PSU Key:Model 1201 The unit is in good cosmetic condition. 1x Olympus Hand-switch:Model U-HSTR2The item powers on and is in a reasonable, used cosmetic condition. 1x Olympus Laser Diode Interface Controller:Model FV10-LDIFThe unit is in good cosmetic condition. The PSU is missing. 1x Olympus Power Supply:Model U-RFL-T200Life Time: 3667 hoursThe unit powers on and is in good cosmetic condition. It is not known if the Burner has been replaced after 200 hours. 1x Olympus Mercury Light Source:Model U-LH100GThe unit powers on and is in good cosmetic condition. The Lamp is working. 1x Olympus Light Source StandModel FV10-FIRThe unit is in good cosmetic condition. There are some scuffs and scratches from general use. 1x Olympus Power Supply:Model FV5-LDPSURunning hours: 79335.3 The unit powers on and is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units. 1x FV5-LDPSU Olympus Power Supply Key:Model 1201The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply. 1x Olympus Laser HeadModel LD405The unit is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply. 1x IW-R3000N Rack Mountable Server ChassisThe unit powers on and is in good cosmetic condition. Accessories: 1x Olympus objective correction capModel CAP-G0.5 ± 0.5The unit is in good cosmetic condition 1x Olympus Laser safety shutterModel F10-SHAUXThe unit is in good cosmetic condition. 1x Olympus Goose neck fibre optic light pipesModel LGS3F1200UVThe unit is in good cosmetic condition. Spacers: 2x L3cm xW3cm xH0.5cm 2x L4cm x W4cm x H0.5cm The units are in good cosmetic condition. Misc Accessories: 1x IW-R3000N Rack Mountable Server Chassis User manual V2.11x Microsoft Windows 2000 XP professional Inst/uninst CD1x Belkin Serial Adaptor 1x RCA Phono male to male cable (sealed)1x SATA Cable (C13214-001 FOXCON 0550)1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable 1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor1x RCA Female to mini DIN 8-PIN connector (sealed)1x VGA to DVI connector (sealed) Installation discs:2x Belkin USB Adaptor Installation1x Intel Express installer1x Sapphire installation driver 1x mini disc

Leica HC PL FLUOTAR 40x/1.30 OIL ∞/0.17/OFN22/E Microscope Objective This is being sold on behalf of (more) a client. This is a very rare 40x PLAN FLUOTAR Oil Objective with a high numerical aperture of 1.30. This high NA is very hard to achieve in production with 40x so most companies don't even attempt to create it, due to the cost of high-quality optics and technology required.  This objective allows to have a large field of view with high resolution at 1.30 NA. The objective is in as new condition and has only been used for 1 demonstration. The objective is listed for collection only, but we can potentially ship it if needed.The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) PA Objectiv (more)es APO 2X, 10X, 20X Parfocality Adjustable Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage. The PSM1000 is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) PA includes: - APO 2X, 10X, 20X Parfocality Adjustable Objectives - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Alresa Digicen centrifuge. Maximum speed adjustable up to 4,300 rpm in 10 rpm steps. Timer from 1 to (more) 99 min. Selectable braking. Includes 4 x 50 mL swing-out rotor. Manual not included. The Alresa Digicen centrifuge is a robust lab instrument that offers a wide range of functions for sample separation. With its modern and compact design, this centrifuge is ideal for use in research, clinical or industrial laboratories. In addition, it features a digital control panel that allows easy programming of centrifugation speed and time, making it a versatile and easy-to-use tool for any laboratory application.

dimensions (hxwxl): 215x210x195 mm

Dimensions (HxWxD): 2600 x 1800 x 770 mm Worktop (WxD): 1730 x 700 mm

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W