Breukhoven BMS-E1 Trinocular Polarization Microscope

BARNSTEAD Thermolyne 1300 Muffle Furnace FB1310M-33 Model: FB1310M-33 Capacity: 1.3 litres Working t (more)emperature limit: 1100ºC Continuous operating temperature: 982ºC Table top muffle Heating volume: 100 X 95 X 110mm External dimensions: 200 X 335 X 220 mm 1050 watts / 220V Environmental operating conditions: 17 to 27ºC, humidity less than 80% non-condensing Average cosmetic condition, numerous traces of rust

Yamato DKL-301C Forced Convection Oven 27L, 115V Temperature Range Room temp. +10~260°C Temperature (more) Distribution Accuracy ±2.5°C (at 260°C) Chamber Volume 27L Features - Fixed temperature, Quick auto stop, Auto stop, and Auto start operating modes with easy control capabilities - Settings can be made digitally with the dedicated operation menu keys or the ▲/▼ keys - Calibration off-set as auxiliary function - Self-diagnostic functions, MCB with over current protector, hydraulic standalone overheat prevention device Economical forced convection 27L constant temperature oven with basic functions and safety features. Fixed temperature, Quick Auto stop, Auto stop, and Auto start operating modes with easy control capabilities. Settings can be made digitally with the dedicated operation menu keys or the ▲/▼ keys. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKL-301C Forced Convection Oven 27L, 115V includes: - 2 Stainless Steel Shelves - 4 Shelf Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato ADP-300C Benchtop Vacuum Oven 27L, 115V Operating Temperature Range 40~240°C Operating Pres (more)sure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 27L Features - Easy input of parameters and settings - Digital PID controller supports fixed temperature, quick auto-stop, auto stop, auto start and program operations. - Self-diagnostic and overheating prevention functions - Silicon rubber door seal prevents air from leaking - Independent over heating prevention device for each circuit - Customizable with N₂ gas inlet and communication ports - Calibration off-set function - Easy maintenance Introducing the Yamato ADP Series - a range of versatile laboratory ovens designed to elevate your scientific endeavors. Whether you choose the ADP200C, ADP210C, ADP300C, or ADP310C, you're guaranteed exceptional performance and a host of valuable features. With easy parameter input and settings, our digital PID controller ensures precise temperature control, supporting fixed temperature, quick auto-stop, auto-start, and program operations. Safety is paramount, with self-diagnostic and overheating prevention functions, a silicon rubber door seal to maintain an airtight chamber, and independent overheating prevention devices for each circuit. Customize your oven with N₂ gas inlet and communication ports, and fine-tune settings with the calibration offset function. Maintenance is a breeze, and our safety features include sensor trouble detection, SSR, short circuit detection, heater disconnecting detection, memory error prevention, overheating safeguards, and measurement temperature error detection. Make the right choice for your lab with the Yamato ADP Series.INCLUDED: The Yamato ADP-300C Benchtop Vacuum Oven 27L, 115V includes: - Shelf Plate (3 pcs.) - Power Cord - One Year Manufacturer's Warranty

Memmert UF160TS Forced Circulation Pass-Through Oven 161L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 161L (5.68 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 161L (5.68 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 8 shelves with a maximum chamber load of 462 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF160TS Forced Circulation Pass-Through Oven 161L, 115V offers advanced precision and reliability with a working temperature range from at least 10°C above ambient to +250°C. Designed with a spacious 161L (5.68 cu.ft.) interior, this oven features a stainless steel chamber reinforced with deep-drawn ribbing, providing both durability and ease of cleaning. The TwinDISPLAY control system, equipped with two high-definition TFT-color displays, allows for adaptive multifunctional temperature management, ensuring accurate control via two Pt100 sensors in a 4-wire circuit for mutual monitoring. Additional features include forced air circulation, adjustable fan speed in 10% increments, and pre-heated fresh air admixture for optimal thermal distribution. For enhanced safety, the Memmert UF160TS includes the AutoSAFETY system, which provides integrated over- and undertemperature protection, as well as a mechanical temperature limiter (TB) that switches off heating at 20°C above the nominal temperature. The Function SetpointWAIT ensures the process begins only once the set temperature is reached, while the Function HeatBALANCE allows precise adjustment of heating performance. With a maximum loading capacity of 462 lbs, spread across up to 8 shelves, this oven is ideal for demanding laboratory applications requiring consistent, reliable performance. INCLUDED: The Memmert UF160TS Forced Circulation Pass-Through Oven 161L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

DO305 Karl Fischer drying oven is ideal for the accurate determination of the water content of solid (more) or viscous samples, such as: Substances that release the water only at a high temperature, such as plastic in powder or granular form     Substances that cause lateral reactions with the Karl Fischer reagent, such as oxidizing inorganic salts     Substances that cause problems in the titration vessel because of their consistency, such as fibrous or pasty substances     Substances that are poorly soluble or insoluble, such as wool, dough, tar and coal

Ohaus orbital shakers for extreme environments These OHAUS-designed instruments are used for applica (more)tions that require CO2 and high humidity for optimal cell growth. They are equipped with a remote control, which magnetically attaches to the outside of almost any incubator or rests comfortably on the workbench (as shown in the photo). The base of the stirrer is placed inside the incubator and connected to the controller with a 170 cm cable which allows for easy external control of the speed and time settings. For these characteristics, the motor is equipped with an IP65 degree of protection. Applications Cell cultures, solubility studies, extraction procedures, suspensions and bacterial and yeast cultures, dyes/bleaches, immunoassays, protein studies, absorption techniques Display Independent LED displays to allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) and stainless steel, external control module, thin ribbon cable (1.7m) that passes easily under the hatch of the incubator or in the general door Construction features Integrated tray (33x33 cm) with non-slip rubber mat (included)

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Maximum speed: 26000 rpm Maximum RCF: 70450 xg Maximum capacity: 6 liters Acceleration/deceleration  (more)profiles: 3/3 Speed control accuracy: ± 20 rpm in the 0 – 1000 rpm range; ± 0.2% in the 1000 – 26,000 rpm range Temperature set range: -20°C to 40°C Temperature accuracy (run mode): ± 2°C under normal laboratory conditions Operating temperature range: 10°C to 38°C Average heat output: 2.5 kW/8500 BTU/hr Noise: 63 dbA (1 m from instrument at maximum speed) Dimensions (HxWxD): 1295 x 710 x 1055 mm Weight: 390 kg Equipped with a Thermo Fiberlite F8-6x1000y Carbon Fiber Fixed Angle Rotor Max speed: 8500 rpm Max RCF: 15810 xg Capacity: 6x 1000 mL

Wesemann / Open cabinet / White /  730x500x580