Nikon C/F3 Focusing Screen Einstellscheibe

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Digital Instruments Signal Access Module lll was removed from a university lab where it was sur (more)plus to requirements. The lab confirmed the unit was working when last used, but it has not been tested at our facility. It is in reasonably good cosmetic condition but has some marks from use. System comprises; 6 x pairs low voltage inputs to the nanoscope controller (data signal)12 x pairs low voltage inputs from the nanoscope controller (control signals)6 x pairs of high voltage outputs from the nanoscope controller (piezo drive signals)6 x pairs of inputs to the sensor4 x pairs outputs from the sensor2 x ports to microscope controller1 x port to microscope1 x port to sensor

This was removed from a university lab where it was surplus to requirements. All units are in good u (more)sed cosmetic condition but they do have various signs of general use. The system consists of: 1 x Bio-Rad Radiance 2000 Laser Scanning System.1 x Bio-Rad Motorised Focus Unit.1 x Bio-Rad Optical Unit. All of the rubber on the wheels of the Radiance has broken off. The wheels do still roll though. The Bio-Rad Radiance 2000 powers up fine, but was not tested any further.

Microscope trinocular Delphi-X Observer DX.1153-PLi eyepieces SWF 10x / 25 mm Ø 30 mm lenses with a  (more)correction to infinite (IOS) plane achromatic PLi 4/10/20 / S40 / S100x oil immersion, 60 mm parafocal, plate 190 x 152 mm with mechanical stage built-in x 78 x 32 mm and 3 W of lighting NeoLED ™ SPECIFICATIONS EYE • Super wide field SWF10x/25 mm for the porta-eye Ø 30 mm HEAD Trinocular design Siedentopf tube inclined at 30°. Distance inter-pupillary adjustable between 47 and 78 mm head trinocular standard has a selector of the optical path of three positions (100:0 / 80:20 / 0:100). Correction ± 5 diopters in both eyepieces. REVOLVER HOLDER OBJECTIVES Revolver holder objectives sextuple oriented towards the interior and are mounted on ball bearings of high precision. With screw thread for objectives of 25 mm diameter OBJECTIVES PLANE ACHROMATIC The Delphi-X Observer ™ comes standard with the objectives of the EIS corrected infinity Plane achromatic 4x / 0.10, 10x / 0.25, 20x / 0.40, S40x / 0.65 and S100x / 1.25 oil-immersion APPROACH Approach macro and micrometric coaxial, 100 graduations, accuracy of 1 μm, 100 μm by the rotation, the range of total displacement of about 35 mm Is supplied with a top elevation of the plate adjustable to prevent damage to the sample and the objectives. The focus system coarse has tension adjustment. The focus knobs micrométricos can be changed from left to right (for a magnetic system) in accordance with the preferences of the user STAGE Plate 190 x 152 mm with mechanical stage mechanical integrated right 78 x 32 mm With coating glass-Gorilla resistant to scratches. Stage mechanical for left-handed available upon request (Reference request: Add -L to the product number) CAPACITOR Abbe condenser with tiltable lens A. N. 0.90/1.25 with identification marks of the numerical aperture. Adjustable in height. Iris diaphragm HIGHLIGHTS DIASCÓPICAS • Type-Köhler-intensity adjustable by NeoLED™ 3W with internal power supply 100-240 V NeoLED™ The innovative design NeoLED™ is a combination of LED and custom lens thin specially designed with a short focal length to obtain three main benefits: • You can capture more oblique light from the LED light source, which significantly increases the light output • It requires less energy to reach this level of intensity of light • The greater opening of NeoLED™ allows the optical systems of the microscope to produce images with higher resolutions, very close to the diffraction limit of theoretical optics SENSOR ICARE This sensor allows to avoid the loss of unnecessary energy. The illumination of the microscope automatically switches off shortly after the user stops in front of the microscope CARRY HANDLE The carry handle on the back of the microscope guarantees a safe transportation of the microscope and the tool and the porta-tools integrated to ensure that the right tool is always available PACKAGING Supplied with power cable, protective cover, replacement fuse, user manual and small bottle of immersion oil 5 ml. Case of polystyrene

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Formulatrix Tempest V.2 Liquid Handler with Pumping Box This item was removed from a university labo (more)ratory where it was surplus to requirements. The liquid handler and pump box are in good cosmetic condition, and power on. The previous client has reported that the system is not in working order, as it requires a PF shared control valve (Mantis CF solenoid). Due to the client's statement, this system is listed as Spares/Repair. Software and a compatible computer are required for operation. Components:- Formulatrix Tempest V.2 - Serial No.: 0117 - Pump Box V2.1 - Serial No.: 0169 Includes:- 18 x Silicone Nozzle Strip-HV 0.35mm (PN: 207459_A) - 7 x Silicone Nozzle Strip-HV 0.15mm (PN: 204694) - 7 x Low Volume Silicone Chips (Volume 1 µL & 0.2 µL) - 1 x High Volume Silicone Chip (Volume 5 µL & 1 µL) - Tube connectors - 2 x Holders

Waters Xevo TQ-S Mass Spectrometer w/ PC & Mass Lynx Software Lab This system was removed f (more)rom a university where it was surplus to requirement. All units are in good cosmetic condition and power up. The Waters Xevo pairs successfully with the Mass Lynx software. The password required for the PC is available on request. This system comprises the following: 1 x Waters Xevo TQ-S Mass SpectrometerS/N: WAA280 1 x Edwards Pump XDS100B Dry Vacuum PumpS/N: 119487143 1 x Edwards Pump XDS46i Dry Vacuum PumpS/N: 139464035 1 x Lenovo Thinkcentre PCS/N: S4DVW20 1 x Lenovo L 2250pwD MonitorS/N: V6-0DED6 1 x Kensington keyboard 1 x Microsoft Mouse 4 x Various connection cables 1 x Stainless steel pipe 2 x Pump hose pipes with aluminium fittings and various clamps

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 4 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes a brush and tweezers, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.

Hermle Z287-A Compact Universal Centrifuge The Z287-A exceeds the limitations set forth by tradition (more)al microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Compact Universal Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty