Adapter for Microscopy M27/1

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Prior NanoscanZ NZ100 Fine Piezo Focusing Instrument Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

13 x GW INSTEK GDS-1022 Digital Storage Oscilloscopes with Probes These units were removed from a un (more)iversity lab where they were surplus to requirements. The units are in good condition with minimal wear. All units have been powered on, and each comes with the appropriate GTP-060A-4 Voltage Probe. Includes - 14 x GTP-060A-4 Voltage Probe Specifications:- Line Voltage Range: AC 100-240V - Frequency: 50-60Hz - Fuse Rating: T1A 250V - Power Max: 18W 40VA

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND MZ 2C NT +AK SYNCHRO+EK Chemistry Vacuum System Ultimate Vacuum 7 mbar / 5 torr Maximum  (more)Pumping Speed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - High performance even at low vacuum levels. - Optimized vacuum even with gas ballast for condensate purge. - Simultaneous operation of two independent vacuum applications, with reliable check valves to prevent interference between applications - Excellent environmental friendliness due to efficient solvent recovery. This chemistry vacuum system provides the simultaneous operation of two processes with only one pump. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens. Each vacuum connection is provided with a manual flow control valve to regulate the effective pumping speed. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment. INCLUDED: The VACUUBRAND MV 2 VARIO Select Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert IF55 Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 53 L (1.1 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF55 Forced Circulation Incubator 53L, 115V offers precise temperature control and efficient forced air circulation, making it ideal for a variety of laboratory applications. With a setting temperature range of +20°C to +80°C and a working range starting at 10°C above ambient, this incubator ensures consistent performance for temperature-sensitive processes. The spacious 53L (1.1 cu.ft.) interior is made from reinforced stainless steel, designed for easy cleaning and long-lasting durability. Its ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller, complete with a high-definition TFT-color display, allows for accurate adjustments of parameters such as temperature, fan speed, air flap position, and program time. In addition to its advanced functionality, the IF55 includes several safety features, such as an adjustable overtemperature monitor and mechanical temperature limiter (TB) that meet protection class 1 standards according to DIN 12880. The forced air circulation system, powered by a quiet air turbine adjustable in 10% steps, includes the option for pre-heated fresh air admixture to further enhance control over the incubation environment. With a maximum chamber load of 176 lbs and each shelf supporting up to 44 lbs, the IF55 is built for reliability and precision, offering advanced AtmoCONTROL software for programming and data management via Ethernet or USB. INCLUDED: TheMemmert IF55 Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Motic BA210E LED Trinocular Compound Microscope Magnification Range 4x to 100x Optical System Colour (more) Corrected Infinity (CCIS) Illumination 3W LED Features - Optional intermediate Epi-LED S fluorescence module - Quadruple nosepiece - EC Plan achromatic objectives - Compact rackless stage - Upgradable with phase & pol contrast and simple darkfield - Fixed-Koehler illumination, HAL/LED interchangeability - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) Motic’s BA210E is dedicated to give an answer on basic demands from educational and biomedical laboratory work. The upgraded EC Plan Achromatic objectives in our CCIS© Infinity Concept deliver a fully corrected intermediate image for crisp and clear results within a 20mm Field of View. The rackless stage enables a safe x/y scanning even for the unexperienced user. The complete series of EC Plan Achromatic objectives, from 4X to 100X magnification, is achieving an improved image contrast both for human eye and digital cameras through the photo port. Especially in Phase contrast, the optional objectives (positive & negative Phase) show a remarkable performance for a wide range of applications. The N-WF eyepieces start with the standard 10X/20 mm Field of View and provide a diopter adjustment (+/-5dpt) for both eyes, ready for the use of optional reticles. Motic's BA210E is designed for a demanding daily usage. The rackless stage allows a safe evaluation of samples without prominent gear rack. The standard eyepiece tubes feature a 30° viewing angle for maximum comfort, whereas the interpupillary distance of 55-75mm can easily be adjusted, following individual conditions. The trinocular tube option with a 100:0 / 20:80 light split allows the adaption of digital camera systems and the presentation of microscopic images to a larger public. The BA210E is an integral part of Motic’s BA microscope concept. An upgrade with Phase contrast (positive & negative), Darkfield, Polarization and even LED Fluorescence can easily be performed. The BA210E exceeds the limits of a basic upright microscope, allowing to use contrast methods for specific application fields even in teaching environments with limited resources. INCLUDED: The Motic BA210E LED Trinocular Compound Microscope includes: - Trinocular head Siedentopf type 30° inclined 360° rotating (Light Split 100:0/20:80) - Widefield high eyepoint eyepiece N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat objectives EC PL 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial rackless stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 3WLED module - 45mm blue filter, immersion oil (5mL), allen hexagonal key, thumb screw, vinyl dust cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z207-M Centrifuge Due to the compact design, the Microlitre Centrifuge Z207-M, is applicable  (more)even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty