Molecular Devices Skatron Embla Microplate Washer Lab

This Tecan Columbus Washer Plus Basic Microplate Washer was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition with minor marks from use. It comes with 3 x 2.5L Waste Bottles and a manual.

This LabTech LT-3500 Microplate Washer was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and runs through the cleaning cycles, though they cannot be completed without the cleaning bottles. It was not tested further. It is in reasonably good cosmetic condition but the screen is slightly damaged. It is still responsive and mostly readable though.

This Tecan HydroFlex Microplate Washer was removed from a university lab where it was surplus to req (more)uirements. The unit powers up but we were unable to test it further at our facility. It is in excellent cosmetic condition with only minor marks from use. It comes in the original packaging box with the following:-Tecan HydroControl PC Package V2.2 (Part no. 30037229) (The software is on this disc).Tecan HydroControl Instructions for use (Part no. 30026398)Tecan HydroFlex Instructions for use (Part no. 30026397)3 x Waste Bottles (Green lids are 2.5L)

Thermo Fisher Scientific Wellwash Versa microplate washer Model : 888 5165010 96- or 384-well plat (more)es washing for ELISA assays cell washing for further immunological or molecular assays Without Tanks

Labsystems Microplate Washer Autowash I Labsystems Cellwash 96 well microplate washer system complet (more)e with vacuum pump and bottles Semi-automatic system Labsystems Cellwash is designed for washing the contents of 96-well plates in a high-throughput manner, reducing the washing time of one plate to a few seconds.

Accuris SmartWasher 96 Microplate Washer, 115VThe Accuris SmartWasher™ 96 automates the process of E (more)LISA plate washing so assays can be prepared quickly, accurately, and with confidence for absorbance reading. It’s the perfect companion to our popular SmartReader™ 96 microplate reader. - Precision control of aspiration needle position - Accurate to 0.1mm - Minimal residual liquid, ≤1μl/well - Auto rinse function eliminates cross contamination - Up to 100 wash protocols can be customized and stored - Liquid level sensors in wash and waste bottles - Wash protocols can be transferred via flash drive Research requires flexibility – the SmartWasher™ 96 provides it. Full plates, partial plates, and strips with U, V, C, or flat bottoms are accepted by this fully automated washer. Multiple aspiration point settings allow for minimal residual liquid in the wells after aspiration. All parameters, including dispense volume, suction time, soak and shake cycles, and shaking speed are easily programmed using the large 4.3” LCD display and keypad. Up to 100 wash protocols can be stored on board the SmartWasher™ 96 and recalled when needed, or transferred between machines with a flash drive. The washer comes equipped with 2 wash bottles, 1 rinse bottle and a waste bottle. All have sensors that alert the user when the solutions are low, or in the case of the waste bottle, when it needs to be emptied. An auto-rinse function primes the dispensing tube and wash heads to prevent cross contamination and clogs. 8- and 12-channel manifolds are available separately to accommodate plates in either orientation. A transparent, acrylic shield surrounds the wash area, allowing for visualization of the plate. Should a spill or leak occur, the beveled spill well ensures that the liquid is extracted immediately to avoid cross-contamination. The SmartWasher™ 96 is the perfect partner for the SmartReader™ 96 Microplate Absorbance Reader as well as other popular readers. 8- and 12-channel manifolds, purchased separately, are available to accommodate different plate orientations. Click Here to View Product Video INCLUDED: The Accuris SmartWasher 96 Microplate Washer includes: - Waste and Buffer Bottles - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Nahita Quartz water distiller. Production 4 L/h. Conductivity at 20ºC 2 µS/cm. Water consumption 1.0 (more) l/min. Made of borosilicate glass. Quartz heater to obtain high purity water. With safety device (flow sensor). Resistance 1x 2500 W. User manual. The Nahita Quartz automatic water distiller. and continuous production, with quartz resistance, it provides us with high quality distilled water given the great purity of the water obtained, free of metal ions and pyrogenic substances, suitable for the preparation of reagents, bacteriological culture media, final washing of glass etc It is made entirely of high quality borosilicate glass, which allows continued use of the equipment and guarantees its durability. It has a safety mechanism that automatically disconnects the quartz resistance when the pressure of the cooling water decreases, and connects it again when it recovers. It has a support adapted for coupling to the wall and its reduced dimensions allow easy handling and cleaning. The equipment finds its application in clinics, hospitals and laboratories in general, located in the research departments of agri-food, pharmaceutical, environmental companies, etc. as well as in schools and universities. In case of deterioration, accidental breakage, etc, of the parts that make up the equipment, the following components are available below for replacement:

KNF IP65 UFEM 1.10 ST.18S2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 ST.18S2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MyPIPETMAN Select P10, 1-10 uL, Metal Ejector PipetteFeatures - Designed to be ergonomic, saf (more)e, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 1 to 10 uL - 3 Year Manufacturer's Warranty

Eppendorf F-45-36-8 Fixed Angle Rotor with Lid Eppendorf F-45-36-8 Fixed Angle Rotor with Lid, new  (more)in box. Cat. # 022636600. This rotor accommodates 36 x 0.5ml. The Eppendorf F-45-36-8 Fixed Angle Rotor is for use in the Eppendorf 5415D and 5415R Centrifuges. INCLUDED: The Eppendorf F-45-36-8 Fixed Angle Rotor with Lid includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf F-45-36-8 Fixed Angle Rotor SpecificationsMax Speed13,200 RPMMax RCF16,110 x gCapacity36 x 0.5ml

Collection bottle (PP) capacity: 5L Max pumping speed 50/60Hz: 1.9/2.2 m3/h Ultimate total pressur (more)e (absolute): 100mbar 230V / 50-60Hz / 120W