BioTek ELx50/12V MTP Microplate Washer Mikroplatten Wascher

This listing is for a BioTek 405TS Microplate Washer. The unit is in full working condition and is  (more)ready for immediate release. Supplied with: (2) 4 Litre waste bottles (2) 4 Litre buffer bottles Microplate Holder The BioTek 405TS Microplate Washer 405TSRSQ is a top-tier instrument designed to streamline the washing process for various assay types, particularly in cell-based assays, microsphere assays, and ELISA applications. Here’s a detailed overview of its key features and specifications: Key Features: Patented Verify Technology: This innovative feature automatically checks for any blockages in the manifold tubes before initiating a wash cycle, ensuring that each wash is effective and reliable, minimizing the risk of failed assays. Ultrasonic Advantage: This functionality automatically cleans any blocked manifold tubes, helping to prevent clogging and ensuring consistent performance across multiple wash cycles. High-Resolution Touch Screen User Interface: The intuitive interface allows for easy setup and control of washing processes for both 96- and 384-well microplates, enhancing usability and flexibility. Dual-Action Manifold: This feature enables independent control and positioning of the aspirate and dispense sections, allowing for precise liquid handling and optimized washing techniques. Optimized Cell Washing: Designed for gentle washing of loosely adherent monolayers, the washer operates at low flow rates with angled dispensing to protect delicate cell structures during the wash process. Biomagnetic Separation and Vacuum Filtration: These optional enhancements provide advanced washing capabilities, expanding the versatility of the instrument for various applications. Specifications: Wash Volume: Configurable from 25 to 3000 μL per well, accommodating a wide range of assay requirements. Microplate Types: Compatible with 96- and 384-well plates, including both low profile and standard height, as well as solid and filter bottom options. Fluid Pump Type: Utilizes a diaphragm pump, ensuring consistent fluid delivery and performance. Instrument Control: Managed through a local touch-screen computer software interface, simplifying operation and customization of wash protocols. Number of Reagents: Capable of handling 1 to 4 reagents, allowing for complex washing and assay procedures.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manifold Type: 96-well washing, 8-channel dispense/aspiration (1 x 8) Washing Speed: ≤130 seconds (3 (more)-cycle wash, 300 μL/well, 1 x 8) Wash Cycles: 1 – 10 Volume Range: 25 – 3000 μL/well Dispense Precision: ≤ 3% CV Residual Volume: ≤ 2 μL/well Soak Time: 1 – 600 seconds Shaking: User-programmable speeds and timing Dimensions (DxWxH): 406 x 356 x 165 mm Weight: 9.8 kg

2x Plate washer uWasher DG-34 Grifols (One in good condition, 1 for parts)

This Molecular Devices Skatron Embla Microplate Washer was removed from a university lab where it wa (more)s surplus to requirements. The unit is in reasonably good cosmetic condition with some marks from use. It powers up but we were unable to test it further at our facility.

TOMY One Spin Mini Centrifuge New equipment in its original packaging Model/model number: One Spin - (more) mini laboratory centrifuge Maximum capacity: 1.5/2.0 ml microtubes x 4 Rotation speed: 4,000 rpm (±20%) *Fixed Centrifugal acceleration: 420-950 × g (1.5 ml) / 450-1000 × g (2.0 ml) Size/Weight: L105×D130×H96mm 0.38kg Single-phase power supply AC100-240V 50/60Hz 0.6A (dedicated power adapter)

The FLoid Cell Imaging Station is an affordable, user-friendly imaging solution for the quick detect (more)ion and verification of fluorescently-labeled samples. The FLoid Cell Imaging Station captures transmitted light and three-color fluorescent images of your cells and samples right at your benchtop. You do not need to be specially trained or have dedicated staff to operate it. An uncomplicated user interface, streamlined image acquisition process, and real-time, multicolor display allow even imaging novices to produce high-quality images with a few mouse clicks. Cell Data: 3-Color Detection Color: Green, Red, Blue Data Outputs: JPG Files, PNG Files, BMP Files, TIFF Files Detection Method: Fluorescent Display: Adjustable tilt, 15-inch color Emission Wavelength: 446/33 (Blue), 532/59 (Green), 646/68 (Red) Excitation Wavelength: 390/40 (Blue), 482/18 (Green), 586/15 (Red) Filter Type: FITC, Texas Red, DAPI For Use With: All fluorophores compatible with excitation and emission filters Format: Slide(s), Cell Culture Dish, Cell Culture Plate (Multi-Well), Cell Culture Flask (T75), Petri Dish, Coverslip(s) Laser Features: LED based adjustable intensity (50,000 hour life) Magnification: 460X (optical) to 1840X (with digital zoom) Memory: 2 Gb USB Objectives: Numerical Aperture = 0.45, Fixed 20X Plan Fluorite, Working Distance = 5.9 mm Stage: Open-Stage Platform for Most Cell Vessels Camera Type: 1.3 Megapixels, Monochrome, HAD CCD, 1/3 inch Lighting Type: LED Resolution: Image resolution – 1296 x 964 pixels, Display resolution – 1366 x 768 pixels Dimensions (WxHxD): 400 x 540 x 350 mm Weight: 12.7 kg

High precision measurements The 10 kg class E2 mass standard is a precision metrology tool, ideal fo (more)r calibrating high-precision balances used in metrology, pharmaceutical, chemical laboratories and other research and industrial institutions. Product Features The ergonomic, cylindrical shape ensures ease of use and precise placement of the standard on the weighing platforms. Made from the best materials, it guarantees stability and resistance to changes in environmental conditions.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Ohaus 30314821 6 x 250ml Fixed Angle Rotor The Ohaus 30314821 6 x 250ml Fixed Angle Rotor accommodat (more)es a capacity of up to 6 x 250ml. This rotor is designed for use with Ohaus FC5816, FC5816R, FC5916, and FC5916R series centrifuges, and reaches speeds up to 10,000 RPM with a maximum RCF of 15,650 x g. INCLUDED: The Ohaus 30314821 6 x 250ml Fixed Angle Rotor includes: - Ohaus 30314821 6 x 250ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA HB Digital Heating Bath Filling Volume Max 4 l Heating Temp. Range Room Temp. to 180°C Heat Cont (more)rol Turning Knob Features - 4 l bath volume - Max. media temperature: 180 °C - Ergonomic handles - Key button to lock heating bath temperature - Clear, black-and-white display - Safety operating modes A, B, C - Permanent set-point/ actual temperature display - USB interface The IKA HB Digital Heating Bath offers a 4-liter bath volume and a maximum media temperature of 180 °C. It features ergonomic handles and a key button to lock the heating bath temperature. The clear, black-and-white display provides a permanent set-point and actual temperature display. Equipped with safety operating modes A, B, and C, the bath ensures secure operation. It also includes a USB interface for easy connectivity. The heating range is from room temperature to 180 °C, with precise control via a turning knob and a resolution of 1 ±K.