Thermo Scientific Multidrop 832 microplate dispenser

Luminex 200 Multiplex Assy System with Luminex SD & XYP This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use. Included are; Luminex 200Model: 200Serial#: LX10007082403 Luminex XYPModel: XYPSerial#: LXY07085103

Thermo Scientific Multidrop 832 microplate dispenser The Multidrop 384 is an automatic, programmable (more), eight-channel microplate dispenser. It has a peristaltic pump for rapid and continuous dispensing of liquids into 96 and 384-well microplates. Dispenser of microplates 96 and 384 Accuracy, speed and reliability in dispensing. Possibility of dispensing by selecting the number of columns . External dimensions : 31x32x18 cm Weight : 7 Kg Dispensing accuracy: 5 µl: ±3% (typical) 20 µl: ±2% (typical) 100 µl: ±1% (typical) Dispensing speed: 96-well plate:20 µl in 5 seconds; 50 µl in 8 s 384 well plate: 20 µl in 20 s; 50 µl in 25 s Year of manufacture : 2005

MicroFill is an economical, compact, and reliable dispenser for 24-, 96-, and 384-well microplates.  (more)An autoclavable fluid path is ideal for applications that require sterility. The dispense flow rates are easily selected to accommodate sensitive cell-based assays or vigorous dispensing for ELISA. Accurate and precise dispensing are guaranteed, without the time-consuming recalibration, cassette replacement, and maintenance commonly associated with other dispensers. Intuitive, on-board software is easy to use and saves time in instrument setup. Microplate Types: 24-, and 96-well, Low-profile, standard, and deep-well formats Manifold Type: One 8-tube (1 x 8) manifold−316 stainless steel tubes Dispense Speed: 96 wells, 10 µL/well, 1 x 8: 8 s Volume Range 5−6,000 µL/well, Minimum prime volume: 10 mL Flow Rates: User-programmable rates from high to low Dispense Accuracy: ± 1 µL at 5 µL, ± 1 µL at 20 µL, ± 1% at 100 µL Dispense Precision: ≤ 5% CV at 5 µL, ≤ 2.5% CV at 20 µL, ≤ 1% CV at 100 µL Dimensions (DxWxH): 460 x 380 x 180 mm Weight: 8.9 kg

Life Technologies Ion Torrent PGM Sequencer, One Touch 2, One Touch ES System This Life Technologies (more) Ion Torrent system was removed from a university lab where it was surplus to requirements. The system powers up and is in good cosmetic condition with minor marks, no further testing has been done. The system consists of the following: Life Technologies Ion Torrent PGM Life Technologies Ion OneTouch ES Enrichment System ModuleThe device powers on and when the start/stop button is pressed, the arm begins to move. No further testing has been done. Life Technologies Ion Torrent OneTouch 2 Instrument Next Generation Sequencing The device has been turned on and the system is booting up. I used the touchscreen to open the lid, which successfully opened. Life Technologies Ion Torrent Ultra-Turrax Tube Drive for PGM (Personal Genome Machine) by IKAThe device has been turned on successfully. I was able to adjust the timer settings as required.

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Ohaus 30400169 Modular Heat Block, 10 x 8 PCR Tube Strips The Ohaus 30400169 Modular Heat Block, 10  (more)x 8 PCR Tube Strips is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400169 Modular Heat Block, 10 x 8 PCR Tube Strips includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Focusing Block for BA310MET-H Focusing Block for BA310MET-H. Valid for BA310MET-H Binocular and BA31 (more)0MET-H Trinocular (Upright image).INCLUDED: The Focusing Block for BA310MET-H includes: - Manufacturer's Documentation

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW