Stuart Flask Shaker Mixer SF1 incl. Timer 60 min 2 Side Arms and 4x Clamps 500ml

The system includes: pt100 probe (code A00000268), rod (code A00001069) and clamp (code A00000280);  (more)magnetic stir bar Ø8x40 mm (code A00000356). Magnetic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7 is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood.

Analog heat lamp with rings set for adjustable internal diameter. Diameter: 40 – 160 mm Dimensions ( (more)H x Diameter): 275 x 210 mm

Axon Instruments Axopatch 200B Integrating Patch Clamp Amplifier Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to conduct further testing at our facility.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Bright Microtome 5040 Laboratory Cryostat was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and the light works. It has been tested with a digital thermometer (not included). It was set to -35˚C. We ran for it for 6 hours and Quick Freezer Temperature got to -35˚c, Specimen Temperature got to -14˚c and the chamber Temperature got to -15˚c.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

IKA Eurostar 100 Control Overhead Stirrer Speed Range 0/30 to 1,300 RPM Viscosity Max. 70,000 mPas (more) Stirring Quantity Max. 100 l Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Reverse function - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Quiet operation - Error code Display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery Powerful laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 1300 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.INCLUDED: The IKA Eurostar 100 Control Overhead Stirrer includes: - EUROSTAR 100 control - H 67.60 Temperature sensor, stainless steel - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Screw driver - Protective cover for WiCo contact - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 100 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)100 lMotor rating input174 WMotor rating output142 WMotor principleBrushless DCSpeed displayTFTSpeed range0/30 - 1300 rpmReversible direction of rotationyesIntermittent operationyesViscosity max.70000 mPasOutput max. at stirring shaft 136 WPermissible ON time 100 %Torque max. at stirring shaft 100 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 10 mmHollow shaft, inner diameter11 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmTorque displayyesSpeed controlelectronicNominal torque1 NmTorque measurementtrendDeviation of torque measurement I6 ±NcmTimeryesTimer displayTFTTime setting range1 - 6000 minTemperature measuring range-10 - +350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)86 x 267 x 230 mmWeight4.7 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 40RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input186 WComparison of IKA Eurostar Control Overhead StirrersSpecsEurostar 20Eurostar 60Eurostar 100Eurostar 200Eurostar 400Stirring quantity max. per stirring position (H2O)20 l40 l100 l100 l150 lSpeed range0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity max.10000 mPas50000 mPas70000 mPas100000 mPas100000 mPasTorque max. at stirring shaft20 Ncm60 Ncm100 Ncm200 Ncm400 NcmPower input176 W176 W186 W130 W226 WSetting accuracy speed1 ±rpm1 ±rpm1 ±rpm1 ±rpm1 ±rpm.comparison-table tr td:nth-child(4) { background-color: #fffacd;}DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

Heidolph Promax 2020 Reciprocating Platform Shaker With a usable area of 390 x 340 mm, the large Pro (more)max is particularly suitable when the use of large or multiple vibrating funnels is required. In conjunction with the appropriate assembly parts, the device can be expanded by a second floor.This shaker has an integrated timer for up to 120 minutes. An acoustic warning signals the end of the set time and the shaking process is also stopped. A stroke of 20 mm combined with a speed of 20 — 400 rpm guarantees clean phase separation and efficient extraction results. Click Here to View Product Video INCLUDED: The Heidolph Promax 2020 Reciprocating Platform Shaker includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 3 Year Manufacturer's Warranty

Accuris PR2122-N-1000 qMAX Probe One-Step Multiplex RT-qPCR Kit, No Rox, 1000 Reactions Reactions qM (more)AX Probe One Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2122-N-1000 qMAX Probe One-Step Multiplex RT-qPCR Kit, No Rox, 1000 Reactions Reactions includes: - 10x1ml reaction mix, 10x100μl RTase - Manufacturer's Documentation - 2 Year Manufacturer's Warranty