HR070-CMT 0.70X High Resolution C-Mount Adapter with Z clamp ZEISS

Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V Temperatur (more)e Range Ambient +5°C to 70°C Heater Power 1.0 kW Chamber Volume 92L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 92L glassware drying natural convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V includes: - 2 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Branson Converter Stand Clamp for SFX150 & SLP Sonifiers The Branson Converter Clamp (101-063-1 (more)109), is designed to be used with the Branson Support Stand and Rod when using the SFX150 and SLP sonifiers. This product ensures easy adjustments of horn positioning in relation to the sample. Sonifier CompatibilitySFX 150, and SLP Sonifiers inCompatible Stand (H x Dia.)101-063-1108

This Thermo Shandon Pathcentre PCB Enclosure was removed from a university lab where it was surplus  (more)to requirements. The unit is in reasonably good cosmetic condition. It powers up but due to the alarm sounding with Code: Error23 present we are unable to test it further at our facility, and it is sold as Spares or Repairs. Error 23 is a power supply issue. System includes the following: 1x PathcentreC/N: 75210007 issue 36S/N: PC1572E0202 1x PCB EnclosureC/N: 75210044 issue 10 1x CommandC/N: 75210012S/N: 1550

Armfield Timatic Micro Rapid Extractor FT110 This item was removed from a university where it was su (more)rplus to requirement. It powers up, but we are unable to test further at our facility. It is in good cosmetic condition.

Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU This was remo (more)ved from a university lab where it was surplus to requirements. All parts power on and appear to be in working condition. The control unit and emergency stop button are working correctly. The stage control appears to be working correctly with a smooth motor. Only the cables shown are included. The system is in good cosmetic condition, but the rubber foot ends are crumbling. There is no software included with the system. Items included:Main Units:Olympus Lext OLS3100Dimensions: 464(W)x559(D)x620(H)mmWeight: 56.5kg Olympus MM6-ASPS ControllerDimensions: 381(W)x304.8(D)254(H)mmWeight: 14.33kg Olympus OLS3000 Power SupplyDimensions: 355.6(W)x177.8(D)355.6(H)mmWeight: 9kg Accessories:Olympus U-DICROlympus U-P03Olympus U-AN360-3

Labconco 9000620 WaterPro PS/HPLC Polishing Station, 115V, 60HzFeatures - Timed dispense for unatte (more)nded operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000620 WaterPro PS/HPLC Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Roller 10 Basic ShakerRoller shaker with 10 rolls provides smooth rocking androlling action at a (more) fixed speed. Used for mixing blood samples, solid andliquid suspensions and viscous samples. The unit can be used with allconventional tubes and cylindrical bottles. Easily removable attachmentsprovide for quick cleaning in case of sample spills. - Usable at 4 to 50 °C in incubators - Suitable for continuous operation - Removable rolls enable shaking of larger tubes - Easy operation with touch keypad - Shaking diameter: 24,5 mm (height) - Speed range: 30 rpm (fixed) INCLUDED: The IKA Roller 10 Basic Shaker includes: - ROLLER 10 Basic - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 1 Year Warranty Extension with IKA Registration) IKA Roller 10 Basic Shaker SpecificationsType of movementrollingPermissible ON time100 %Speed min.0 rpmSpeed fix30 rpmSpeed displaynoneTimer displaynoneOperating mode continuous operationRolls, number 10Rolls, Ø 32 mmRolls, length327 mmWorking area length350 mmRolls, luffing angle fixed3 °Rolls, max stroke at roll end16 mmRolls, changeable, removableyesDimensions (W x H x D)380 x 115 x 545 mmWeight8.242 kgPermissible ambient temperature4 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage100 - 240 VFrequency50/60 HzPower input24 WDC Voltage24 VCurrent consumption1000 mAComparison of ModelsSpecificationIKA Roller 10 BasicIKA Roller 10 DigitalIKA Roller 6 BasicIKA Roller 6 DigitalType of MovementRollingRollingRollingRollingSpeed Range30 rpm (fixed)5 - 80 rpm30 rpm (fixed)5 - 80 rpmTimerNoYesNoYesNumber of Rolls101066Rolls Diameter32 mm32 mm32 mm32 mmRolls Length327 mm327 mm327 mm327 mmWorking Area Length350 mm350 mm350 mm350 mmDimensions (W x H x D)380 x 115 x 545 mm380 x 115 x 545 mm240 x 115 x 545 mm240 x 115 x 545 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }