Double stand clamp for ES-LS-DLS-PW-DLH-OHS Velp

Zeiss Axioplan 2 Imaging Fluorescence Microscope w/ Lamp PSU, HBO/HAL Lab This system was removed fr (more)om a university where it was surplus to requirement. The system is in good cosmetic condition with all included units powering on without any issues. The motorized stage and filter turret, are functioning as intended. The lamp PSU works but does not show lamp hours. We would recommend setting this up with a new mercury lamp system. Modules included: Eyepieces:- 2x Zeiss Pl 10x 25 (P/N: 44 40 34) Nosepiece:- 1x 6-position nosepiece, fitted with the following 2 objectives: - Zeiss CP-ACHROMAT 5x/0.12 ∞/- (P/N: 44 09 20) - Zeiss EC Plan-NEOFLUAR 100x/1.30 oil ∞/0.17 (P/N: 1018-595, 1066-987) Additional items:- 1x Carl Zeiss HBO 100 lamp house (P/N: 1007-980) - 1x Carl Zeiss HAL 100 12v 100w lamp house (P/N: 1039-685) - 1x LEJ ebq 100 lamp power supply (P/N: 1003-928, 426-784) S/N: N40418608 - 1x Zeiss Condenser Achromatic-Aplanatic Swing Out (P/N: 1035-632) - 1x Zeiss Mechanical Stage (P/N: 1067-325) - 1x Zeiss Reflector Turret 322 Synchroflex T 2.5 5/500 with the following filters/cubes: - Filter Set 20, BP 546/12, FT560, BP 575-640 - 02, G365, FT395, LP 420 - Filter Set 10, BP 450/490, FT510, BP 515-565 - 41007, HQ - P/N: 424931 - 30, 150020, Aqua - 2x Iris Stop Slider (P/N: 1062-360) - 1x Filter Slide (P/N: 45 21 74) - 1x VGA type connection cable

Job Lot of Hollow Cathode Lamps These were removed from a university lab where they were surplus to  (more)requirements. There are 46 boxes of various brands, and it is uncertain if they are in working condition except for one box that has been labelled 'Not working.' Job lot includes:- S&J Juniper & CO Palladium 247.6 nm Cat#: 4140S&J Juniper & CO Cobalt 240.7nm Cat#: N/AS&J Juniper & CO Europium 459.4nm Cat#: 4117S&J Juniper & CO Lead 217.0nm Cat#: 3129S&J Juniper & CO Gold 242.8nm Cat#: 4121S&J Juniper & CO Cobalt 240.7nm Cat#: 4113S&J Juniper & CO Tin 233.5nm Cat#: 4162S&J Juniper & CO Gadolinium 368.4nm Cat#: 4118S&J Juniper & CO Chromium 357.9nm Cat#: 5112PES&J Juniper & CO Tellurium 214.3nm Cat#: 4157S&J Juniper & CO Cadmium 228.8nm Cat#: 4108S&J Juniper & CO Selenium 196.0nm Cat#: 4151S&J Juniper & CO Ruthenium 349.9nm Cat#: 4148S&J Juniper & CO Silicon 251.6nm Cat#: 4152S&J Juniper & CO Titanium 364.3nm Cat#: 5163S&J Juniper & CO Rhodium 343.5nm Cat#: 4146S&J Juniper & CO Indium 303.9nm Cat#: 4125S&J Juniper & CO Magnesium 279.5nm Cat#: N/AS&J Juniper & CO Mercury 253.7nm Cat#: 4134S&J Juniper & CO Bismuth Serial#: 73940Baird Atomic LTD Neon 224.6nm Cat#: C832 SNPerkin Elmer Lumina Lamp Part#: N305-0187Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Sb Part#: N066-1284Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Cu Part#: N305-0121Perkin Elmer Intensitron Lamp Part#: N305-0146Enbeeco Hallow Cathode Lamp Ar Type: C831/SrThermo Scientific Hallow Cathode Lamp Palladium Part#: B 89748Hitachi Hallow Cathode Lamp 343.5 Ne Part#: 207-2017S&J Juniper & CO Antimony Part#: 4892dS&J Juniper & CO Molybdenum 313.3nm Part#: 4746S&J Juniper & CO Cadmium 228.8nm Part#: 4101Rank Hilger Pt Cat#: FL2164Varian Fe/Co/Ni/Mn/Cu/Cr Part#: 56-100076-00Hilger & Watts Co/Mn/Fe/Cu Cat#: FL1210Hilger & Watts Ti Cat#: FL1169Pye Unicam Silver Part#: 611472Varian Techtron Pb Cat#: 4R1352Varian Techtron Cd Cat#: 4N934Pye Unicam A1 309.3nm Part#: 9423Baird Ne 249.8nm Cat#: C832-BCathodeon Ltd Ne Cat#: 3QNY/FeS&J Juniper & CO Ca/Mg 422.6/285.2 Cat#: 3621Phillips Cu Part#: 9423 390 30291Activion Ni 232/341 Serial#: 27387

Scilogex SP-V1100 Spectrophotometer The Scilogex Spectrophotometers are indispensable instruments ro (more)utinely used in colleges, universities and research institutes for quantitative analysis in fields including biotechnology and quality control of new material developed. V-Series provides high resolution, high performance and excellent stability. Four models cover the range. SP-V1100 Spectrophotometer 325~1000nm Features: - User Friendly Operation and Information Rich LCD Display: The large 128 x 64 dots, backlit LCD screen with adjustable brightness control displays a large array of data also in graphical format. - On-Board Data Storage: The System can save the test results, up to 200 groups of data and 200 standard curves in the RAM memory. - Data can be restored after a sudden power failure. - Auto setting wavelength: To set wavelength automatically to calibrate the system through arrow keys to avoid operation errors. - Automatic Switching: Tungsten& Deuterium lamps switching is automatic. Selectable from a wavelength range of 190 to 1100nm. - PC control through application software: The spectrophotometer is fully equipped and capable of executing all functions in stand-alone mode. The optional application software 'Wave Professional' provides computer control for the spectrophotometer(through the built-in USB port), apart from other functions such as spectrum scan, Time scan(kinetics), multi-wavelength scanning & Nucleic Acid /Protein measurement. - Large sample compartment: To accommodate 5–100mm path length cuvettes with optional holders. A variety of optional accessories are available. INCLUDED: The Scilogex SP-V1100 Spectrophotometer 320~1100nm, with Tungsten Lamp, 4 glass square cuvettes includes: - Tungsten Lamp - 4 x 3.5ml Glass Cuvettes - Dust Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Analog heat lamp with rings set for adjustable internal diameter. Diameter: 40 – 160 mm Dimensions ( (more)H x Diameter): 275 x 210 mm

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Scale HY10.H for statistic control Scales HY10.PGC series is equipped with module for control of pac (more)ked goods. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after pre-defined quantity of packages (samples) has been controlled. Number of the packages is fixed by scale program depending on product batch size. Scales features 10,1" colourful, graphic touch screen display and full alphanumeric keyboard aiding scale operation and setting control parameters. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scales memory and at the same time it can be printed by printer connected to the scales. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 5 l Maximun load (more): 7.5 kg Direction of rotation: left Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Plate material: ceramic Plate dimensions: 100 x 100 mm Dimensions (WxHxD): 150 x 105 x 260 mm Weight: 2.8 kg

The peristaltic pump of the Cole Parmer type Masterflex L/S is ideal for pumping corrosive, abrasive (more) and viscous liquids without damaging the pump. The Cole Parmer Masterflex L/S can also be used in the pharmaceutical and biopharmaceutical industry. This peristaltic pump can be used in combination with the L/S 13, L/S 14, L/S 16, L/S 25, L/S 17 and L/S 18 tubing. Speed: 10 – 600 rpm Pump head type: 7518-00 Tube range: L/S 13: 0.6 – 36 mL/min L/S 14: 2.0 – 130 mL/min L/S 16: 8.0 – 480 mL/min L/S 25: 20 – 1000 mL/min L/S 17: 30 – 1700 mL/min L/S 18: 40 – 2300 mL/min