Benchmark H1000-MR-T15 MAGic Clamp Tube Rack, 32x15ml, tubes

Axon Instruments Axopatch 200B Integrating Patch Clamp Amplifier Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to conduct further testing at our facility.

Job Lot of Hollow Cathode Lamps These were removed from a university lab where they were surplus to  (more)requirements. There are 46 boxes of various brands, and it is uncertain if they are in working condition except for one box that has been labelled 'Not working.' Job lot includes:- S&J Juniper & CO Palladium 247.6 nm Cat#: 4140S&J Juniper & CO Cobalt 240.7nm Cat#: N/AS&J Juniper & CO Europium 459.4nm Cat#: 4117S&J Juniper & CO Lead 217.0nm Cat#: 3129S&J Juniper & CO Gold 242.8nm Cat#: 4121S&J Juniper & CO Cobalt 240.7nm Cat#: 4113S&J Juniper & CO Tin 233.5nm Cat#: 4162S&J Juniper & CO Gadolinium 368.4nm Cat#: 4118S&J Juniper & CO Chromium 357.9nm Cat#: 5112PES&J Juniper & CO Tellurium 214.3nm Cat#: 4157S&J Juniper & CO Cadmium 228.8nm Cat#: 4108S&J Juniper & CO Selenium 196.0nm Cat#: 4151S&J Juniper & CO Ruthenium 349.9nm Cat#: 4148S&J Juniper & CO Silicon 251.6nm Cat#: 4152S&J Juniper & CO Titanium 364.3nm Cat#: 5163S&J Juniper & CO Rhodium 343.5nm Cat#: 4146S&J Juniper & CO Indium 303.9nm Cat#: 4125S&J Juniper & CO Magnesium 279.5nm Cat#: N/AS&J Juniper & CO Mercury 253.7nm Cat#: 4134S&J Juniper & CO Bismuth Serial#: 73940Baird Atomic LTD Neon 224.6nm Cat#: C832 SNPerkin Elmer Lumina Lamp Part#: N305-0187Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Sb Part#: N066-1284Perkin Elmer Intensitron Lamp Cd Part#: 303-6016Perkin Elmer Intensitron Lamp Cu Part#: N305-0121Perkin Elmer Intensitron Lamp Part#: N305-0146Enbeeco Hallow Cathode Lamp Ar Type: C831/SrThermo Scientific Hallow Cathode Lamp Palladium Part#: B 89748Hitachi Hallow Cathode Lamp 343.5 Ne Part#: 207-2017S&J Juniper & CO Antimony Part#: 4892dS&J Juniper & CO Molybdenum 313.3nm Part#: 4746S&J Juniper & CO Cadmium 228.8nm Part#: 4101Rank Hilger Pt Cat#: FL2164Varian Fe/Co/Ni/Mn/Cu/Cr Part#: 56-100076-00Hilger & Watts Co/Mn/Fe/Cu Cat#: FL1210Hilger & Watts Ti Cat#: FL1169Pye Unicam Silver Part#: 611472Varian Techtron Pb Cat#: 4R1352Varian Techtron Cd Cat#: 4N934Pye Unicam A1 309.3nm Part#: 9423Baird Ne 249.8nm Cat#: C832-BCathodeon Ltd Ne Cat#: 3QNY/FeS&J Juniper & CO Ca/Mg 422.6/285.2 Cat#: 3621Phillips Cu Part#: 9423 390 30291Activion Ni 232/341 Serial#: 27387

Scientific Industries SI-1500 Orbital Shaker with Ratcheting Clamps The Scientific Industries SI-150 (more)0 Orbital Shaker with Ratcheting Clamps is a heavy duty orbital shaker with flexibility for a variety of vessels on a single platform. The SI-1500 offers whisper quiet operation with fully programmable options. Control speed from 10 RPM to 300 RPM with fully programmable time, reversing time, acceleration and deceleration, orbit reversing, etc. Customizable mixing action allows for anything from a smooth vortex to sloshing aeration. Programmable ramping allows for gentle stirring increase to preserve samples and avoid spills. INCLUDED: The Scientific Industries SI-1500 Orbital Shaker with Ratcheting Clamps includes: - 2 Ratcheting Cushioned Clamps - 1 Non-Ratcheting Cushioned Clamp - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heated magnetic stirrer IKA RCT Basic safety control Reference: RCT B Aluminum alloy plate Speed ​​- (more) Rpm: 50-1200 (infinitely variable) Top plate diameter 135mm 600W Max temperature: 310°C Max. H₂O stirring capacity: 20 L Dimensions: 160×270×85 mm Weight: 2.45 kg Many stains on plastics With power cable Without probe Good working condition

This Schutt Homgen Type 3.200 011 Homogeniser was removed from a university lab where it was surplus (more) to requirements. The unit powers up and the chuck turns but there is no tool attached. It is in good working order. It is in reasonable cosmetic condition but has some marks and rust from age.

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Ohaus 30400172 Modular Heat Block, 12 x 15 mL Conical Tubes The Ohaus 30400172 Modular Heat Block, 1 (more)2 x 15 mL Conical Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400172 Modular Heat Block, 12 x 15 mL Conical Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Block, 96 x 0.2ml or 1 x PCR Plate The Benchmark Block (for 96 x 0.2ml or 1 x PCR plate) f (more)or use with the MultiTherm Heating Shaker or MultiTherm Heating and Cooling Shaker INCLUDED: The Benchmark Block, 96 x 0.2ml or 1 x PCR Plate includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty