Gynkotek Model DG-1330 Degasys Degasser

Laboratory vacuum tap with base Straight wall-mounted manifold with base

Brandnew. Excellent condition - Excellent price. 12 months warranty. Delivery Scope: - 100x Base pla (more)tform - 100x Microscope slide - 100x Filter card 9,5 mm - 100x Filter card 12,5 mm - 100 x Insert - 100x 2.2ml PP tube with a lid Tested suspension types: - Natural biological fluids such as cerebrospinal fluid, body cavity fluids, synovial fluid, discharges, pus, etc. - Suspensions in isotonic smear solutions, tissue puncture specimen, expectorations, bronchial washings, etc. Features and benefits: - Obtaining of an equal cellular preparate and supernatant from the same sample of tested biological suspension. - Obtaining of specimen (cytospin) by way of filtering the supernatant onto a filtering paper. - Rapid placement of cells on a microscope slide by centrifugal metod with permeation of supernatant onto a filtering paper. - Possibility of supernatant recover on a microscope slide by automatic drain off into a test tube. - Prevention of aerosoling by securing fluid escape into the centrifugal chamber. - Avoidance of infections by application of single-use inserts.

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-41675 Triple red Duo water purification systemITEM-41499 pharmacia gradifracITEM-41500 gallenkamp magnetic stirrerITEM-41501 Gilson fraction collectorITEM-41502 Pharmacia Biotech FRAC-100ITEM-41503 Gilson 802C ManometricITEM-41504 MJ Research PTC-200 Thermal CyclerITEM-41505 ortholoc 9502 amplifierITEM-41506 Dell Optiplex GX110ITEM-41507 Jumo eTRON TITEM-41508 Gilson Dynamic Mixer 811CITEM-41509 Gilson 811C Dynamic MixerITEM-41510 Rodwell monostirITEM-41683 techne Hybridiser HB-1DITEM-41684 Hoefer Scientific Instruments PS500XITEM-41685 Consort E443 power supplyITEM-44386 pfeiffer balzer uno 016 b pumpITEM-41686 Pharmacia Biotech EPS 3500 power supplyITEM-41687 Ohaus precision Advanced unitITEM-41688 GRI LightboxITEM-41691 Biometra Standard Power Pack P25ITEM-41700 Harvard Compact Infusion Pump-Model 975ITEM-41701 Verderflex M500ITEM-41704 Pneuchange Automatic Gas Cylinder Change Over UnitITEM-41705 CareFusion Micro 1 SpriometerITEM-41706 VWR VV 3 VortexITEM-41707 Aria Pressure-Volume Conductance SystemITEM-41708 GeneAmp PCR System 9700ITEM-41709 Bibby HC502ITEM-41710 Techne Dri-Block DB.2AITEM-44464 Wallac 1295-012 Heat SealerITEM-44466 Techne Dri-Block DB.2DITEM-44467 Techne Dri-Block DB.2PITEM-44468 FisherBrand VortexITEM-44469 Eppendorf Heat Sealer Model 5390ITEM-44470 Hemocue Glucose 201+ MachineITEM-44471 VWR Mini VortexerITEM-44472 D2012 Mini CentrifugeITEM-44473 SLS Select BV1000 Vortex MixerITEM-44474 Branson 200 UltraSonic CleanerITEM-44476 Rotamixer DeluxeITEM-44478 Bio-Rad Semi Dry Transfer CellITEM-44479 Denver Instrument APX-402ITEM-44481 ES Overhead StirrerITEM-44480 VWR Kurogel Midi Plus Electrophoresis HorizontalITEM-44482 Engel VSTG 35/230/110ITEM-44483 LPS-220B Lamp Power SupplyITEM-44485 Motor Asincrono 90/60ITEM-44489 Millar Transducer Control UnitITEM-44490 7x Various Automatic Pipette Fillers And ChamberITEM-44491 Thermal PrinterITEM-44492 3x Xcell Surelock

3 x Thermo Thermotor T3 Scientific Hotel Carousels Lab These items were removed from a university wh (more)ere they were surplus to requirement. All items are in very good cosmetic condition, we are unable to test them as they require additional units to perform functionality. All items included are as follows: - 3 x Thermo Thermotor T3 Scientific Hotel Carousels Lab - 18 x Towers with microplate Trays Fitted - 12 x Towers without microplate Trays Fitted - 3 x Power Adapters for each Carousel

Multivac A300/51 Vacuum Sealer This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. As it has been used in a lab setting it is only suitable for lab use again in the future. It is not to be used for commercial catering or food packing.

The system includes: pt100 probe (code A00000268), rod (code A00001069) and clamp (code A00000280);  (more)magnetic stir bar Ø8x40 mm (code A00000356). AREC 7 CONNECT MAGNETIC STIRRER AREC 7 Connect features state-of-the-art heating plate technology, designed by VELP, which ensures temperature homogeneity, thermal efficiency and long-lasting heating performance. AREC 7 Connect can be connected to the external Pt100 probe for precise thermoregulation of the fluid, being ideal for temperature-sensitive applications in Chemistry, Biotechnology and Pharmaceuticals. The probe guarantees stable and precise thermoregulation up to 300°C, with an accuracy of ± 0.5°C. Powerful stirring for all your lab applications Thanks to the powerful magnetic coupling, you will have the possibility to stir up to 20 liters (H2O), from 30 up to 1700 rpm (aqueous solutions), ideal characteristics for any type of application, chemical, pharmaceutical and microbiological. In addition, the SpeedServo ™ technology, designed by VELP, will keep the speed constant as the viscosity changes. Absolute safety and ease of use for laboratory operators The AREC 7 Connect hotplate stirrer guarantees a higher level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. Save time with the new control panel Thanks to the double digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature and the stirring speed. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1700 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood. Programmable operation for excellent laboratory efficiency AREC Connect is equipped with some exclusive and extremely advanced features that optimize unattended operation, easily usable, thanks to the intuitive display: - Integrated timer to suit your lab workflow - 1 min to 99 h 59 min (1 min steps) - Autorverse of the stirring direction which guarantees advanced mixing capabilities - from 5 s to 99 min and 59 s (1 s steps) - Programs in intermittent mode for better scheduling of unattended operations - from 5 s to 99 min 59 s (1 s steps) - Acoustic signals for timers and alarms - Safety lock function to avoid possible alterations of the working conditions VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREC Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP service centres.VELP ERMES: FROM USER WORK MANAGEMENT TO PROCESS DATA-RICH AREC Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP assistance centres.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dispersion rod S 25 KV - 25G for IKA T25 digital ULTRA-TURRAX New material in original packaging For (more) homogenizer IKA T25 digital ULTRA-TURRAX Model: S 25 KV - 25 G (S25KV-25G) Processed capacity (H2O): 0.05 - 2 l Stator diameter: 25 mm Rotor diameter: 17 mm Stator-rotor gap: 0.5 mm Max. permissible speed : 25000 rpm Peripheral speed : 22.2 m/s Immersion depth : 40 - 225 mm Total length : 270 mm Material in contact with the product : FFPM / SIC, AISI 316L, AISI 302 pH 2 - 13 Solvent resistant : yes Max. working temperature : 220 °C Sterilization methods : all methods Vacuum : 1 mbar Max. pressure : 6 bar Final fineness, suspension : 15 - 50 µm Final fineness, emulsions : 1 - 10 µm Weight : 0.6 kg

Memmert IN30 Natural Convection Incubator 32L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 32 L Features - 32 L (1 cu.ft.) stainless steel chamber for compact sample storage - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - 1 Pt100 sensor DIN class A in a 4-wire circuit ensures precise monitoring - ControlCOCKPIT with SingleDISPLAY, featuring an adaptive digital PID-microprocessor controller with high-definition TFT display - Natural convection system for consistent temperature distribution - Electronically adjustable air flap for pre-heated fresh air admixture - Max chamber load of 132 lbs for high-capacity sample handling - Autodiagnostic system with adjustable overtemperature monitor for added safety The Memmert IN30 Natural Convection Incubator 32L, 115V is a reliable, compact solution for precise temperature control in laboratory applications. With a 32 L (1 cu.ft.) stainless steel chamber, this incubator is designed to handle diverse sample needs within a temperature range from at least 5°C above ambient to +80°C. Equipped with a highly accurate Pt100 sensor DIN class A in a 4-wire circuit and the ControlCOCKPIT SingleDISPLAY digital PID-microprocessor, adjustments are easily managed on its high-definition TFT display. The natural convection system ensures uniform temperature distribution throughout the chamber, while an electronically adjustable air flap allows pre-heated fresh air flow. The incubator supports a maximum chamber load of 132 lbs and incorporates an autodiagnostic system with adjustable overtemperature monitoring for dependable performance and safety. INCLUDED: The Memmert IN30 Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty