Bio-Rad QX100 Droplet Reader Lab

This Pharmacia Biotech XK 50 Column was removed from a university lab where it was surplus to requir (more)ements. The unit is in reasonably good cosmetic condition with marks from use. It has not been tested. Included with it are;1 x Accessory kit XK-50 Code no. 56-0011-861 x N-Acetyl-D-Galactosamine 250mg sealed1 x  Set of Instructions

MVE XC 34/18 Nitrogen Dewar This item was removed from a university where it was surplus to requirem (more)ents. The dewar is in good cosmetic condition, with signs of use. Specifications: - Model: XC 34/18 - Serial No.: ARB97K105 - Capacity: 34 litres - Neck Opening: 9cm - Holds: 6 canisters

Bio-Rad GelAir Dryer The GelAir drying system is perfect for drying polyacrylamide and agarose gels. (more) With timer control On/off mode works Function modes : Fan only; fan and heat; off Dryer capacity : 4 shelves Without shelve , Without GelAir Drying Frames Dimensions (WxDxH) : 27x43x30 cm Weight : 8 kg

Brandnew. Excellent condition - Excellent price. 12 months warranty. Delivery Scope: - 100x Base pla (more)tform - 100x Microscope slide - 100x Filter card 9,5 mm - 100x Filter card 12,5 mm - 100 x Insert - 100x 2.2ml PP tube with a lid Tested suspension types: - Natural biological fluids such as cerebrospinal fluid, body cavity fluids, synovial fluid, discharges, pus, etc. - Suspensions in isotonic smear solutions, tissue puncture specimen, expectorations, bronchial washings, etc. Features and benefits: - Obtaining of an equal cellular preparate and supernatant from the same sample of tested biological suspension. - Obtaining of specimen (cytospin) by way of filtering the supernatant onto a filtering paper. - Rapid placement of cells on a microscope slide by centrifugal metod with permeation of supernatant onto a filtering paper. - Possibility of supernatant recover on a microscope slide by automatic drain off into a test tube. - Prevention of aerosoling by securing fluid escape into the centrifugal chamber. - Avoidance of infections by application of single-use inserts.

IKA ROTAVISC SBS hi-vi II Complete Viscosity Measuring Range 800 to 320,000,000 mPas Viscosity Accur (more)acy (FSR) ±1% Speed Range 0.01 to 200 rpm Features - Equipped with steel ball bearing technology for high robustness and durability - Ensures measurement accuracy of ±1% of the measuring range with repeatability of ±0.2% - Measures viscosity from 800 to 320,000,000 mPas, suitable for a broad range of applications - Allows for stepless speed adjustment from 0.01 to 200 rpm for precise control - Built-in graph function for real-time data visualization - Equipped with overload protection for safe operation in harsh environments - Supports both timer and continuous operation modes - Ideal for high sample throughput, frequent spindle changes, and use in varying locations - Offers connectivity for data logging The SBS (Steel Ball Bearing, Suspended) rotational viscometers extend a large part of the application spectrum of our IKA ROTAVISC device family. Instead of a jewel bearing, these devices are equipped with a special ball bearing technology, characterized by their high robustness. Predestined for applications with very high sample throughput, frequent spindle changes, operation in harsher environments, or even frequently changing device locations, ROTAVISC delivers fast and accurate results for both simple and demanding viscosity measurements. Intuitive menu navigation awaits you via the generous 4.3" TFT display, with a digital leveling feature that supports the correct setting of the starting condition. Recurring tasks are facilitated by the simple ramp function. The accuracy of the ROTAVISC rotary viscometers for Newtonian and non-Newtonian liquids is +/- 1% of the measuring range, with reproducibility of +/- 0.2%. With ROTAVISC, you have a viscometer in which you can adjust the speed steplessly, as well as specify programs or individual speed levels. The viscosity-measuring range is 800 - 320,000,000 mPas.INCLUDED: The IKA ROTAVISC SBS hi-vi II Complete includes: - Power Cord - Two Year Manufacturer's Warranty

IKA C 200 h Semi-Automated Halogen Resistant Calorimeter Measuring range max. 40000 J Measuring time (more) dynamic approx. 8 min Measuring time isoperibol approx. 17 min Features - Designed for educational institutions and low-volume industrial laboratories - Space-saving, standard-conforming combustion calorimeter for liquid and solid samples - Manual handling for water and oxygen filling, with optional automation available - Offers four working methods: isoperibolic, dynamic, manual, and time-controlled - Includes C 5012 halogen-resistant, catalytic activated decomposition vessel - Decomposition vessel suitable for high-halogen and sulfur samples (3%) - Conforms to standards: DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711 - Hastelloy construction ensures corrosion resistance and high recovery rates for halogen and sulfur analysis - Operated via C 6040 CalWin software for monitoring and exporting data to Excel, Word, SQL, or LIMS The IKA C 200 h Semi-Automated Halogen Resistant Calorimeter is an ideal solution for educational institutions and industrial laboratories requiring precise gross calorific value measurements of liquid and solid samples. Designed for teaching and training purposes, this compact, space-saving device features a semi-automated isoperibol mode, making it perfect for labs with lower analysis volumes. Its robust design ensures compliance with industry standards such as DIN 51900, ISO 1928, and multiple ASTM methods. The package includes essential components like the C 200 calorimeter measuring cell, the halogen-resistant C 5012 decomposition vessel, and an oxygen filling station, providing a comprehensive setup for immediate operation. Equipped with four operational modes—dynamic, isoperibol, manual, and time-controlled—the C 200 h offers versatile measurement options tailored to user requirements. The halogen-resistant C 5012 decomposition vessel, constructed from corrosion-resistant Hastelloy, ensures superior performance for samples containing halogens or sulfur. Water and oxygen handling is manual but can be upgraded for higher throughput with the optional C 200.RC hose set and RC 2 recirculating chiller. Controlled via C 6040 CalWin software (sold separately), the unit allows seamless monitoring and export of data to Excel, Word, SQL, or LIMS. This versatile calorimeter combines precision, durability, and ease of use, making it a valuable asset for teaching and industrial applications alike.INCLUDED: The IKA C 200 h Semi-Automated Halogen Resistant Calorimeter includes: - C 5012 Decomposition vessel, halogen resistant - C 200.2 Conversion kit for C 5012 - C 248 Oxygen filling station - Ignation adapter - C 200.1 Measuring cup 2000 ml - Water emptying hose - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

11175712 Lids for THERMO T41 Laboratory Centrifuge Buckets Set of 4

Wild Heerbrugg M40A Inverted Microscope This microscope was removed from a university lab where it w (more)as surplus to requirements. The unit is in reasonably good cosmetic condition. It powers up and is in good working order (PSU not included) - we used a WILD PS from another item of stock. Objectives: 1x Wild Heerbrugg 4/0.10 1x Wild Heerbrugg 10/0.25 Ph 1x Wild Heerbrugg 20/0.25 Ph 1x Wild Heerbrugg 40/0.25 Ph d=0.17

Erlab Captair Filtair 606C fume hood. Pre-filter. Carbon filter NOT included. Front air velocity: 0. (more)4 to 0.6 m/s. Analogue air velocity flowmeter. Electrogalvanised steel structure and front and side panels made of chemically resistant acrylic. White light. Wall feedthrough. External dimensions: 600*970*600 mm. User manual not available. Filters must be ordered separately depending on the application. Available filters: AS for organic vapours (+350 €); BE+ for organic vapours and acid vapours (+530 €); F for formaldehyde vapours (+485 €); and, K for ammonia vapours (+570 €). The Erlab Filtair 606 fume hood is a device designed to protect the user from toxic and hazardous fumes during chemical experiments. With its advanced filtration system, this hood ensures efficient gas extraction, maintaining a safe and clean working environment in the laboratory. In addition, its compact and ergonomic design makes it ideal for small spaces, offering comfort and functionality to the user.

Labconco 710201000 FreeZone 2.5L -84 C Complete Freeze Dryer System Features - Patented moisture sen (more)sorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco FreeZone 2.5L -84 C Complete Freeze Dryer System includes the Labconco 710201000 2.5L -84C Benchtop Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying chamber, and an Edwards RV3 Vacuum Pump. Features of the Labconco 2.5L -84C Benchtop Freeze Dryer with stainless steel coil and collector: Upright stainless steel collector coil holds 2.5Lof ice before defrosting -84C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Environmentally-friendly HCFC/CFC-free refrigeration system Internal coil maximizes vapor-trapping efficiency FreeZone exclusive features protect your vacuumpump from costly damage: A vacuum break valve bleeds air into the system whenpower to the freeze dryer or vacuum pump is shut off for more than 5 minutes. Amoisture sensor prevents refrigeration or vacuum start-up when moisture isdetected in the drain line. Vacuum pump is automatically shut down when a leakis present in initial pull down or during run. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. The Edwards RV3 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 2.5L -84 C Complete Freeze Dryer System includes: - Labconco 710201000 FreeZone 2.5L -84°C Benchtop Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying chamber - Edwards RV3 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Ministar 80 Digital Overhead Stirrer Stirring Quantity Max 50 Liters Speed Range 0/50 - 500 rp (more)m Viscosity Max. 60000 mPas Features - The IKA Ministar 80 Digital Overhead Stirrer boasts a compact design, ensuring space efficiency without compromising performance. - With constant torque across its rpm range, the IKA MICROSTAR and MINISTAR series offer reliable stirring for various lab needs. - Operating the stirrers is a breeze, thanks to a stable rotary knob and a clear display showing the rotational speed. - Rapid and simple software updates are facilitated through the USB interface, ensuring the devices stay up-to-date effortlessly. - The IKA MICROSTAR and MINISTAR stirrers prioritize essential features, making them dependable companions in the lab. - Available in six versions with rpm up to 2,000 and torque up to 80 Ncm, these stirrers excel in both performance and compactness. The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself:Compact design - The reduced design and the focus on the most essential aspects make the new IKA MICROSTAR and MINISTAR stirrers reliable laboratory companions. Constant torque - All models of the IKA MICROSTAR and MINISTAR series guarantee a constant torque over the entire rpm range. The new devices are available in six different versions with rpms of up to 2,000 rpm and a torque of up to 80 Ncm. Ease of operation - Operation takes place using a stable rotary knob. The display clearly shows the rotational speed. Rapid updates - Regular software updates can be undertaken rapidly and simply via the USB interface. Click Here to View Product Video INCLUDED: The IKA Ministar 80 Digital Overhead Stirrer includes: - MINISTAR 80 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 80 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)50 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 500 rpmViscosity max.60000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft80 NcmSpeed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.8 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)70 x 193 x 147 mmWeight1.72 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WPower input standby0.5 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(7) { background-color: #fffacd; } Request a Formal Quote

Gilson DISPENSMAN 50mLDISPENSMAN is a bottle-top dispenser for convenient, safe, and precise deliver (more)y of common laboratory solutions and solvents. Its innovative, three-position nozzle controls the dispensing of liquids, the removal of air in the system to avoid liquid loss, and includes an anti-drip safety feature that returns liquid to the bottle. Make volume changes quickly and easily with no need to open bottles, decreasing chances of contamination. Five DISPENSMAN models are available covering volume ranges from 250 µL to 50 mL.Accurate and Reproducible DispensingQuickly and easily dispense just the liquid needed with a precise volume setting. The built-in recalibration mechanism ensures reproducibility. Avoid any loss of liquid with the recycle position and recirculation valve for purging air.Safe and Easy to UseKeep your bench and other devices safe with the anti-drip system and the return of liquid into the bottle after use. The sliding volume adjuster enables simple one-hand operation and volume adjustment.Flexible • Adaptable to every type of liquid with an easy calibration • Universal chemical compatibility for many applications • Numerous bottle adaptors • Fully autoclavable at 121°CINCLUDED: The Gilson DISPENSMAN 50mL includes: - Two Year Manufacturer's Warranty