Baxter Nexell CytoMate Cell Washer R4R9860 Lab

This Sorvall SLC-4000 Fixed Angle Centrifuge Rotor PTI F9S-4x1000 was removed from a university lab  (more)where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;7,000rpm9,220 x gHolds: 4 X 100ml

This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full w (more)orking condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

This item has just arrived in our stock. Please enquire for further details.

Ohaus FC5714 Frontier Multi-Pro Centrifuge w/ Selectable Rotor Speed Range 200 to 14,000 RPM Maximum (more) Capacity 4 x 100ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5714 Frontier Multi-Pro Centrifuge w/ Selectable Rotor includes: - FC5714 Frontier Multi-Pro Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a VWR VisiScope IT404 MicroscopeVisiScope IT 404 inverted microscope offers a co (more)mplete solution for your brightfield observations. The IT 404 inverted microscope is equipped with a full set of objectives that covers most standard applications. A mechanical stage is included along with 4 objectives (4x and 40x for brightfield; 10x and 20x for phase contrast).The light ring of the adjustable phase contrast slider is pre-centered when the microscope leaves the factory. It should therefore need no further adjustment. If a re-centering is needed, it can be performed via the two side bolts. The 4X/10X light ring must be used with 4X and 10X phasecontrast objectives, the 20x/40x light ring with the 20x and40x and the opening is used for bright field.The Moticam 5 is an attachable digital C-mount camera with CMOS-Sensor and it features a 5MP live resolution capability along with:- Live resolution: 5.0MP (2592x1944)- Optical calculation: 1/2,5"- Output: MiniUSB- Focusable lens: 12mm- 2 variable diameter eyepiece adapters- Macrotube for specimens observation- Motic Images Plus 2.0 for PC and MAC- Motic 4-dot calibration slideFeatures:- Ergonomic:Every control is easy to reach and every component has been designed with ease of use in mind. Focusing and specimen movement controls allow the wrists to rest on the bench. Light intensity adjustment is placed very close to the focusing knobs. The specimen stage is fitted with a special glass insert that allows you to see the objectives for immediate identification of the magnification set-up. An ergo head allows compensation for operator height.- Efficiency:Plan achromatic, infinity corrected optics, bright 8 W LED illuminator, phase contrastset, holders for specimen slides, flasks, Petri dishes, trinocular head for photo/ video applications. These are the features of IT 404, a powerful, complete and innovative instrument, designed to set a reference standard for routine and advanced tissue culture.- User comfort:The 22 mm extra widefield optics are pleasant to use minimising operator stress. The special eyepieces are designed for eyeglass wearers.- Objectives:Long working distance (LWD) infinity corrected (IOS) plan achromatic: 4x/0,10 (working distance 18 mm), phase contrast 10x/0,25 (working distance 10 mm), phase contrast 20x/0,40 (working distance 5,1 mm), 40x/0,60 (working distance 2,6 mm), corrected for 1,2 mm cover glass.

Nuaire Biosafety Cabinet Stand for 1200mm Wide Safety Cabinet The unit is in good cosmetic condition (more) with minor marks. It is not a solid unit, and is bolted together. 71x118x83cm LWH

Benchmark Roto-Mini Plus Variable Speed Rotator w/ Tube Holders Benchmark’s new Roto-Mini series of  (more)rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, etc. the mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. The Roto-Mini rotator is also available in a “Plus” configuration, providing the following additional features:Variable speed: 5 to 70rpm “Mix” function: Rotating in combination w/ oscillations (increased mixing) “Pause” function: Rotating with intermittent “stops” during rotation “Rock” function: Back and forth, gentle rocking motion (see-saw) Included tube holders hold capacities of 11 x 1.5/2ml, 5 x 5-7ml, 5 x 10/15ml, and 6 x 50ml with 24 x 0.5ml. The Plus models also offer an additional rocking platform (4.5 x 3 in.), as well as a 96 x 0.2ml tube/strip/plate holder for mixing PCR vessels in the “Mix” (oscillating) mode. Click Here to View Product Video INCLUDED: The Benchmark Roto-Mini Plus Variable Speed Rotator w/ Tube Hold includes: - Tube Holder, 11 x 1.5/2.0ml - Tube holder, 5 x 5-7ml - Tube holder, 5 x 10-15ml - Tube holder, 6 x 50ml - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert UN75PA Natural Convection Paraffin Oven 74L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 74 L (2.6 cu. ft.) Features - Internal volume of 74 L (2.6 cu. ft.) for versatile storage and heating applications - Temperature range from +20°C to +80°C with 0.1°C accuracy for precision heating - Equipped with dual Pt100 sensors in a 4-wire circuit for reliable temperature monitoring - TwinDISPLAY control panel with high-definition screens and PID microprocessor technology - AtmoCONTROL software for easy programming and data management via USB or Ethernet - AutoSAFETY with integrated over- and undertemperature monitoring and audible alarms - Durable stainless steel interior, reinforced with ribbing and protected large-area heating - Designed with natural convection for uniform heat distribution throughout the chamber The Memmert UN75PA Natural Convection Paraffin Oven 74L, 115V is engineered to provide precise and uniform heating, making it ideal for applications requiring controlled temperature environments. With a spacious 74-liter (2.6 cu. ft.) capacity, it offers a setting temperature range of +20°C to +80°C, maintaining accuracy within 0.1°C, thanks to its dual Pt100 sensors in a 4-wire circuit. The oven’s TwinDISPLAY control panel features high-definition TFT color displays and a digital PID microprocessor for optimal temperature consistency, while natural convection ensures uniform heat distribution without additional airflow disturbances. Enhanced safety features make this paraffin oven reliable for intensive laboratory settings. The AutoSAFETY function includes integrated over- and undertemperature monitors that follow a preset tolerance range, with audible and visual alarms to alert users of temperature deviations. With AtmoCONTROL software for easy programming and data transfer via USB or Ethernet, the oven allows customizable temperature, program time, and time zone settings. Built with a fully insulated stainless steel door, two-point locking system, and a reinforced, easy-to-clean stainless steel interior, the UN75PA is designed for durability and ease of use. INCLUDED: TheMemmert UN75PA Natural Convection Paraffin Oven 74L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This standard cell production roller culture apparatus allows flexibility for scale-up and productio (more)n of monolayer cell cultures in standard roller bottles. Bottle capacity: 15 Bottle size:  108 to 121 mm diameter, up to 550 mm in length Rotation: 0,25 to 5,3 rpm (110 mm bottle) Operating temperature: 10 to 40°C Dimensions (WxDxH): 760 x 630 x 740 mm Weight: 51 kg

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.