Labconco 3970002 FilterMate Portable Exhauster, HEPA Filter and thimble connection included, 115V, 60Hz

Yamato WA-201UF Auto Pure Economical Type 1 Water Purification System with 0.05 Micron Capsule Ultra (more)filter, 120V Purity 18 Megohm- cm Flow Rate 2L/min (0.53 gpm) with Capsule Filter Pressure Range 20 to 90 PSIG Features - 4 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Replacement cartridges are fresh and made in the USA with a 1 year shelf life. - Compact design - Quick change, cartridge – no tools needed - Built-in pressure regulator Water System with 0.05 micron capsule filter. Type 1 water quality. This system provides 4L per minute of 18.2 megohm water. A quiet recirculation pump ensures constant water purity. Water quality meets or exceeds ASTM Type I water specifications. VP series cartridges sold separately. INCLUDED: The Yamato WA-201UF Auto Pure Economical Type 1 Water Purification System with 0.05 Micron Capsule Ultrafilter, 120V includes: - 0.05 Micron Capsule Filter - Outlet Angle Valve w/ Teflon Tape - Hose Nipple Adapter for Ultrafilter - Quick Connect CPC 3/8” Male x 3/8” - Compression Fitting for Direct Feed Add-On - Final Filter for Dispensing Gun Add-On - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards EMF20 Oil Mist Filter NW25 The Edwards EMF20 Oil Mist Filter NW25 is designed for use with t (more)he Edwards RV12 and E2M18 vacuum pumps. The Edwards EMF20 Oil Mist Filter NW25 extremely efficient at 99.999% DOP test and azide proof. The bottom white half of the body is semi-transparent allowing easy monitoring of oil levels. INCLUDED: The Edwards EMF20 Oil Mist Filter NW25 includes: - NW25 Clamp - Centering Ring - O-Ring - NW25 to 3/4 inch BSP Adaptor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The UV-1800 is an advanced high-resolution spectrophotometer utilizing a precision Czerny-Turner opt (more)ical system. Operation can be either as a stand-alone instrument or as a PC-controlled instrument with the included UV Probe software. USB memory can be connected directly to the UV-1800 for simple data transfer and printing is possible with the optional screen-copy printer or printers that support PCL control codes. Photometric Mode measures the absorbance or transmittance at a single wavelength or at multiple (up to eight) wavelengths. In multiple-wavelength measurement, calculations can be performed on the data obtained for up to four wavelengths, including the calculation of the difference between, or ratio of, the measurements obtained for two wavelengths. Spectrum Mode obtains sample spectra using wavelength scanning. Changes in the sample can be tracked using repeated scans. Data processing operations, such as the enlargement or reduction of the spectra obtained, peak detection, and area calculations, are also possible. Quantitation Mode generates a calibration curve from standard samples, and uses it to calculate the concentrations of unknown samples. Various combinations of wavelengths (1 to 3 wavelengths and derivatives) and calibration curves (K-factor and first-to-third order regression calibration curves) are possible. Kinetics Mode measures the change in absorbance as a function of time, and calculates enzymatic activity values. You can select either the kinetics measurement method or the rate measurement method. Time-Scan Mode measures the change in absorbance, transmittance, or energy as a function of time. Multi-Component Quantitation Mode separately quantitates up to eight components mixed in a single sample. Pure components or mixtures of components can be used as standard samples. Biomethod Mode is capable of analyzing DNA and proteins using the several common quantitation methods including quantitation of DNA or protein using the absorbance at 260/230 nm or 260/280 nm and protein quantitation via the Lowry method, BCA method, CBB method, Biuret method, and UV absorption method (direct measurement at 280 nm). Security and validation functionality are also preprogrammed. Security functions allow you to restrict functions according to three user levels: administrator, developer, and operator. Automatic or semiautomatic validation functions include wavelength accuracy, wavelength repeatability, resolution, stray light, photometric accuracy, photometric repeatability, baseline flatness, baseline stability, and noise level. The operating time of the lamps can be recorded and displayed so that you can anticipate replacement and avoid downtime. Stray Light: <0.02%T at 340 nm, 400 nm; <1.0%T at 198 nm Source Lamp: Deuterium; Tungsten-Halogen Beam Type: Double Bandwidth: 1.0 nm Min Wavelength: 190 nm Max Wavelength: 1100 nm Wavelength Accuracy: ±0.1 nm Wavelength Reproducibility: ±0.1 nm Min Photometric – Transmittance: 0%T Max Photometric – Transmittance: 400%T Min Photometric – Absorbance: -4 A Max Photometric – Absorbance: 4 A Photometric Drift: <0.0003 A/hr Detector: Silicon photodiode Including UV Probe software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW