IKA DB 5.5 Vial Dry Block (21 mm)

Eppendorf 1.5ml Adapters for HPLC Vials Cat # 5427708006 Eppendorf 1.5ml Adapters for HPLC Vials Cat (more) # 5427708006. New in packaging, the 1.5mL adapters for HPLC vials for the Eppendorf fixed angle rotor F-45-18-17- Cryo is for use in the Eppendorf 5430/R and 5702/R centrifuges. This is a set of 18 and holds 12 x 32 mm tubes. INCLUDED: The Eppendorf 1.5ml Adapters for HPLC Vials Cat # 5427708006 includes: - Full 6 Month Parts and Labor Warranty

IKA DB 5.2 Vial Dry Block (15 mm)

OMNITIP™ Starter ST 300 µl tips are high quality laboratory accessories designed for pre (more)cision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 300 µl Colour: transparent Set contains: box, 6 racks and 576 tips Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

Benchmark BV1010 BenchMixer XL Multi-Tube Vortexer, Includes 50x12mm Tube Rack, 115V The BenchMixer™ (more) XL is a heavy-duty vortex mixer designed to facilitate hands-free mixing in tubes, flasks, vials or cylinders. It is ideal for the QuEChERS pesticide analysis method and is instantly adaptable to an exceptionally broad range of vessels, racks and applications (horizontal or vertical). The precisely balanced drive system includes an oversized motor that delivers accurate, reproducible speeds up to 2500rpm with rattle-free operation and minimal vibration. The programmable pulsing function allows for time specific interval mixing, increasing agitation. The 7×12 inch platform accommodates a wide variety of standard, pre-drilled tube racks. Additionally, BenchMixer XL can easily be adapted to almost any type of vessel commonly found in the laboratory (contact us for details). Using the BenchMixer XL is easy; after loading the sample rack and tightening the locking knobs, select the desired speed and run time on the large digital control panel. Then, simply press “Start” and the BenchMixer XL will perform unattended mixing for up to 100 hours.BenchMixer XL’s large capacity and adaptability make it an ideal choice for the medium to high throughput laboratory. INCLUDED: The Benchmark BV1010 BenchMixer XL Multi-Tube Vortexer includes: - 50 x 12mm Tube Rack - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 18 x 5ml Adapters, Cat. # 022638718 Eppendorf 18 x 5ml Adapters, Cat. # 022638718 for A-4- (more)81 rotor. This is a 2 piece set, and the adapters are new in the packaging. The rotor compatible with the Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf 18 x 5ml Adapters, Cat. # 022638718 includes: - Full 6 Month Parts and Labor Warranty

BrandTech Scientific Transferpette S Micro Pipette Starter Kit, 10 to 100ul Adjustable or Fixed Volu (more)me Adjustable Pipette Models Included D-2.5, D-10, & D-100 Pipette Type Air Displacement Features - Ergonomic design ensures a comfortable grip for all hand sizes and both right- and left-handed users - True one-handed operation allows for easy volume setting, pipetting, and tip ejection without changing grip - Low operating forces and short stroke enable relaxed pipetting during extended use - Volume-change protection prevents accidental adjustments and is easy to operate even with gloves - Easy Calibration technology allows quick, tool-free calibration for consistent accuracy - Slim shaft design allows easy access to narrow tubes, including conical centrifuge tubes - Fully autoclavable at 121°C for easy sterilization and contamination prevention - High chemical and UV resistance for long-lasting durability in demanding lab environments The BrandTech Scientific Transferpette S Micro Pipette Starter Kit, 10 to 100 ul is designed for precision, comfort, and efficiency in micro-volume liquid handling. This adjustable volume air displacement pipette set includes three models—D-2.5 (0.1 to 2.5 ul), D-10 (0.5 to 10 ul), and D-100 (10 to 100 ul)—offering versatile solutions for handling small-volume samples with ease. Its ergonomic design ensures a secure, comfortable grip for both right- and left-handed users, regardless of hand size, allowing for fatigue-free pipetting during extended use. True one-handed operation enables seamless volume setting, pipetting, and tip ejection without adjusting your grip, streamlining workflows and improving efficiency. The integrated volume-change protection prevents accidental adjustments and can be easily operated even while wearing gloves. The pipettes feature Easy Calibration technology, allowing for quick, tool-free calibration to maintain consistent accuracy. Additionally, the slim shaft design provides easy access to narrow tubes, such as 15 mL conical centrifuge tubes. Designed for reliability and flexibility, the Transferpette S Micro Pipette Starter Kit is ideal for precise and efficient pipetting in any laboratory setting.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette S Micro Pipette Starter Kit, 10 to 100ul includes: - 3 Pipettes (D-2.5, D-10, & D-100) - 3 x TipBox (2 x 0.5 to 20 ul, 1 x 2 to 200 ul) - 3 Rack Mounts - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

PerkinElmer Spectrum One FT-IR Spectrometer Without a computer Without software Untested equipment

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.