DK Infusetek Syringe Pump SPM

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Pfeiffer Vacuum TPH062 has a wear free permanent magnetic bearing at the high vacuum side and an (more) oil lubricated ceramic bearing at the backing side. Applications: Freeze drying – packaging industry Degassing, casting, dry vacuum smelting (super-pure metals) Incandescent lamp manufacturing Electronic tubes Thin film deposition Space simulation Cryogenic research Electron microscopy Nuclear physics, Plasma physics, High energy physics Particle accelerators – Storage rings Inlet Flange: DN 63 ISO-KF Outlet Flange: DN 16 ISO-KF Final pressure: < 1 x 10-11 mbar Flow Rate (N2): 56 l/s Weight: 3.5 kg

Vacuubrand Vakuum-Pump system BVC 81 This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and runs. The tube connecting the pump to the bottle has been snapped off, allowing all the air to escape before it converts into the bottle. This tubing will need to be replaced but is a consumable. Unable to test further at our facility.

VACUUBRAND ME 4 NT Diaphragm Pump Ultimate Vacuum 70 mbar (52 Torr) Maximum Pumping Speed 2.6 CFM a (more)t 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - ME 4 NT with low vibration and higher pumping speed - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in contact with pumped media are made of aluminum and selected plastics, allowing a wide range of applications for non-corrosive gases. The one-stage construction provides the advantageous combination of high pumping speed and an ultimate vacuum down to 70 mbar. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. The NT-series features further improved performance data. One-stage diaphragm pumps are an excellent choice for continuous, oil-free pumping at modest vacuum requirements. In contrast to water jet pumps, they do not consume water and therefore do not produce any contaminated waste water. Typical applications are vacuum ovens, aqueous filtrations and pumping and evacuation of non-aggressive gases in general. The ME 4 NT offers shorter evacuation times and higher gas throughput.INCLUDED: The VACUUBRAND ME 4 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer HiCube 300 Neo, 100 CFF, MVP 030-3 Turbo Pumping Station Final Pressure 1x10-8 hPa / 7.5x (more)10-9 Torr / 1 x 10-8 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 260 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 300 Neo, 100 CFF, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution designed for all high vacuum applications. Featuring a user-friendly 7-inch touch display, it offers simple operation and remote control capabilities via a web server, allowing for versatile use across various demanding environments. With a final pressure of 1 x 10⁻⁸ mbar and a pumping speed of 260 l/s for nitrogen, this turbo pumping station ensures efficient and reliable vacuum generation. Equipped with the HiPace 300 turbopump and an MVP 030-3 backing pump, this unit provides robust performance with a quiet emission sound level of ≤50 dB(A). The air-cooled forced convection system maintains optimal operating conditions, and the unit is globally compatible with an input voltage range of 100-240 V AC. Weighing 22.5 kg, it is both sturdy and adaptable, making it suitable for a variety of applications in lab and industrial settings. INCLUDED: The Pfeiffer HiCube 300 Neo, 100 CFF, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Applikon BioConsole ADI 1035 BioWave 50SPS rocking system

Perkin Elmer Chemagic 360 2024-0020 DNA Nucleic Acid Extractor Magnetic Separator w/ PC Lab This sys (more)tem is sold on behalf of a Lab where it is surplus to requirement. The system includes a monitor, PC (Intel Pentium, 4 GB RAM, 500 GB storage), Bluetooth keyboard, uninterruptible power supply, separately boxed magnetic head, barcode scanner, and trolley. It is in good cosmetic condition and good working order. Our client is awaiting a visit from a Revvity engineer in the coming weeks to install the latest software and give IQOQ certificates. The collection for this system is available from Surrey, UK. There are 3 units available. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Yamato WG-252-115V Auto Still Type 2 Distilled/Type 1 Deionized Water Purification System, 115V Dist (more)illed Water Delivery Rate ~2.5L/min (with variable flow) Deionized Water Delivery Rate ~1L/min (with variable flow) Water Quality Display Conductivity or Resistivity Features - Two independent dispensers for water sampling - 7-inch LCD touch panel system - Consumable management functions - Trend graph - Easy replacement of ion-exchange resin - Large distilled water tank with capacity of 30L - Easy to use slide out type water sampling tray with drainage eliminates concerns about overflowing water discharge Yamato’s Auto Still multi-purpose water purification system comes standard with water intake membrane filters to increase the life span of all consumables and a 30L large storage tank capacity. The standard equipped membrane filters at the feeding port protect pure water production from contamination. This unit produces ASTM deionized water type 1 and type 2 distilled water kept in a 30L storage tank. INCLUDED: The Yamato WG-252-115V Auto Still Type 2 Distilled/Type 1 Deionized Water Purification System, 115V includes: - Water Supply Hose - Water Supply Hose Filter - Connection Hose Assembly - Can Stone Cleaner - Pretreatment Cartridge - Air Vent Filter - 2 x Membrane Filters - 2 x Filter Covers - 2 x Magnet Hooks - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7&rdquo; TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software &quot;LABEL EDITOR&quot;, and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.