Watson Marlow 623 Peristaltische Pumpe Peristaltic Pump 165rpm Schlauchpumpe

Millipore Milliflex PLUS Pump MXP PUMP 03 Model : MXP PLUS 03 With 3 Microwire Adapter 3 Filtration (more)s Pumps (Milliflex Plus) 3 x 24W

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MD 12 NT Diaphragm Pump Ultimate Vacuum 2 mbar (1.5 Torr) Maximum Pumping Speed 7.1 CFM  (more)at 60Hz Number of Heads/Stages 8/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Reduced process times - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs The MD 12 NT diaphragm pump is an especially powerful pump for oil-free evacuation and pumping of non-aggressive gases. The three-stage design of this eight-cylinder pump provides the advantageous combination of very high pumping speed and excellent ultimate vacuum. The flow path consists of aluminum, stainless steel and carefully selected plastics to permit a wide range of applications. The fabric-reinforced double diaphragms are made of highly flexible FKM for extended operating life and high vacuum performance. Eight-cylinder NT pumps feature quiet operation, with smooth and easy-to-clean surfaces. Like all VACUUBRAND diaphragm pumps they operate absolutely oil-free and do not have any sliding components in the gas path. In normal operation they are completely free of abrasion. This eliminates most of the particulate impurities frequently generated inside of scroll or piston pumps. The MD 12 NT is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases, especially for applications in physics and analytics. Due to the very good ultimate vacuum the MD 12 NT is often used as an alternative to rotary vane pumps, for example for vacuum ovens, for very quick and efficient degassing of viscous media, exhaust gas analytics and especially as backing pump for large turbomolecular drag pumps. The particularly high pumping speed enables the usage of bigger vacuum apparatus and with high gas throughput. The pump is extraordinarily silent and exhibits very low vibration making it an excellent choice for sensitive equipment such as electron microscopes. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. INCLUDED: The VACUUBRAND MD 12 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer HiCube 80 Neo, 63 CF, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-8 hPa / 7.5 x  (more)10-9 Torr / 1 x 10-8 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 67 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 63 CF, MVP 030-3 Turbo Pumping Station is a compact, high-performance system designed for all high vacuum applications. Featuring a user-friendly 7-inch touch display for easy operation, it also offers remote control via a web server. This versatile system is compatible with a wide variety of applications, delivering both reliability and robust performance in demanding environments. With a final pressure of 1 x 10-8 mbar mbar and a pumping speed of 67 l/s for nitrogen, the HiCube 80 Neo ensures efficient vacuum generation. The MVP 030-3 backing pump provides a pumping speed of 1.8 m³/h, with air cooling to maintain peak performance. Operating at a quiet ≤50 dB(A) and suitable for worldwide use, this turbo pumping station is an excellent choice for laboratories and industrial settings requiring dependable high-vacuum performance. INCLUDED: The Pfeiffer HiCube 80 Neo, 63 CF, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel The Gilson MINIPULS 3 Peristaltic Pump Head (more), R4 Four Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Watson Marlow 405 Pump provides users with digital control over a two-channel precision pump. Th (more)is high flow laboratory pump has a speed range up to 200 rpm with a flow rate up to 370ml/min per channel. This microprocessor controlled, dual channel peristaltic pump is easy to control from the upfront digital keypad, allowing users to start, stop, reverse direction, control speed level, and initiate rapid priming. This digital lab pump is built for use with 1.6 mm tubing in sizes 12, 13, 14, & 16 (0.5 – 64.8 mm bore) and spring-loaded track to maximize tube life and flow precision against pressures up to 2 bar. The pump comes with pumphead designed with twin four roller rotors, spring loaded track, and adjustable occlusion lever allowing two individual channels of flow.

Affymetrix GeneChip Scanner 3000 System with Affymetrix Fluidics Station 400 Lab This system was rem (more)oved from a university lab where it was surplus to requirements. The lab confirmed it was in working order prior to removal. Both units power up but have not been tested further. Both units are in great cosmetic condition. The following software is included: -Affymetrix GeneChip Test3 Array Library Files-Affymetrix Data Mining Tutorial Demo Data-Affymetrix GeneChip Human Genome U95 Set Library Files-2 x Affymetrix GeneChip Disease Management Genotyping & GenFlex Arrays-Affymetrix GeneChip Prokaryotic & Additional Eukaryotic Expression Arrays-Affymetrix GeneChip Human Genome U133 Set Library Files-Affymetrix GeneChip Prokaryotic & Additional Eukaryotic Expression Arrays-Affymetrix GeneChip Mouse & Rat Expression Arrays-Affymetrix GeneChip Test 3 Array Library Files-Affymetrix GeneChip Expression Analysis Technical Manual-Affymetrix GeneChip Microarray Suite Version 4.0.1-Affymetrix GeneChip EASI Expression Analysis Sequence Information Database Versions 2.50 & 2.51-Affymetrix GeneChip Instrument Control Install v 4.5-Affymetrix GeneChip Operating Software (GCOS) v 1.3-Affymetrix GeneChip Fluidics Script Install Fluidics Station 450-Affymetrix GeneChip Fluidics Script Install Fluidics Station 400-Affymetrix GeneChip Instrument Control Install v 6.0-Affymetrix GeneChip Operating Software (GCOS) v 1.1.1-Affymetrix GeneChip Fluidics Script Install Fluidics Station 400-Affymetrix GeneChip Fluidics Script Install Fluidics Station 450-Affymetrix GeneChip Fluidics Script Install Fluidics Station 450-Packard Bioscience QuantArray Version 3.0-DigitalMedia v7 Plus Installer Sonic-Sealevel Innovative 1/0 Solutions

Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 108 L (3.8 cu.ft.) Features - 108 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V delivers precise, energy-efficient temperature control for advanced laboratory applications. With a generous 108-liter capacity and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, this incubator supports a variety of sample requirements. The energy-saving Peltier heating and cooling system, featuring individually controlled upper and lower elements, ensures uniform and reliable temperature distribution. The intuitive ControlCOCKPIT with TwinDISPLAY, equipped with a PID-microprocessor controller and high-definition TFT displays, provides easy monitoring, while the SetpointWAIT function enhances accuracy by starting process timing only once the desired temperature is reached. This incubator’s robust stainless steel interior and textured exterior resist corrosion and allow for easy maintenance, ideal for long-term use in demanding environments. Safety features include an AutoSAFETY over- and undertemperature monitor with both visual and acoustic alarms, ensuring protection for sensitive samples. Additional features, such as three customizable temperature calibration points, an autodiagnostic system for fault detection, and a capacity for up to five shelves with a maximum chamber load of 330 lbs, make the IPP110ecoplus a versatile and reliable choice for modern labs. INCLUDED: The Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

Dimensions (WxD): 1500 x 600 mm

Dimensions (HxWxD): 770 x 2000 x 600 mm