WTW OXI 3205 portable oximeter + Cellox 325 probe

RUDOLF ERNST torque meter for screw caps range: up to 4 Nm (35 Torque Inlbs) Rotation in 2 direction (more)s torque meter

HTA Xdc-96pro HT112E Automated Capper for 96 Well Format Sample Storage Tubes This was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and runs through the start sequence without fault. It is in good cosmetic condition with marks from use.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labotect C200 CO2 incubator for in vitro fertilisation (IVF). Capacity 200 litres. Temperature range (more). 27ºC - 47ºC. Stability / uniformity ±0.1 °C /  0.3 °C. Door camera and heated. Range CO2 0 - 10%. Sensor CO2 inflarrojo double beam. Minimal contamination. Active sterile humidity. Glass door, internal subdivided in 6 sections. Shelves adjustable. Over-temperature alarm 32-47 °C. Includes outer container to supply humidity, sterile. Manual. Specifications 230V , 50/60 Hz Device with medical acceptance Interior made of polished stainless steel Intelligent system of temperature control for the inner drying of the chamber. CO2 Sensor -Sensor inflarrojo dual beam -Accurate measurement -Recovery time very short -Long-term stability Direct heating. -Distribution of the homogeneous temperature in the interior -Recovery time very short Diagnostic system -Acoustic alarm and optical -Monitoring of the door -Remote alarm

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Eppendorf 5702R Refrigerated Centrifuge with A-4-38 Rotor The Eppendorf 5702R centrifuge has a maxim (more)um speed of 4,400 rotations per minute, and a maximum g-force of 3,000 x g (RCF). The Eppendorf 5702R has a maximum capacity of 4 x 100ml samples and a timer with a time range between 1 and 99 minutes, with a continuous setting as well. Temperatures from -9C to +40C. With a relatively small footprint, the Eppendorf 5702R benchtop centrifuge can be used in a variety of applications without taking up valuable countertop real estate. The 5702R has a total weight of only 84 pounds, and a maximum height (lid open) of 20.7 inches, making it perfect for under the shelf usage. The 5702R can be used in a range of settings, from clinical to cell culture labs. INCLUDED: The Eppendorf 5702R Refrigerated Centrifuge w/ A-4-38 Rotor includes: - A-4-38 Swing Bucket Rotor w/ Buckets - 1 Set of 4 x 10ml Vacutainer Adapters - 1 Set of 2 x 15ml Adapters - Operator's Guide - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5702R Centrifuge with A-4-38 Rotor SpecificationsMaximum Speed4,400 RPMMaximum g-Force3,000 x g (RCF)Maximum Capacity4 x 100 mlTimer1 – 99 minutes continuousHeight with lid open20.7 inchesTemperature Control-9C to +40CComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

The Alltech 2000ES ELSD Evaporative Light Scattering Detector is designed for the detection of diffi (more)cult samples and is an indispensable tool for drug discovery, complementing data from UV/Vis and MS. Offering lower detection limits, the 2000ES ELSD features two operating modes for optimum performance for all applications. The ELSD 2000ES offers the choice of splitting or not splitting, giving you optimum sensitivity for every application. Light Source: Laser diode with collimating optics, 650nm, 30mW output, class IIIB Detector Element: Silicon photodiode Temperature Range: Ambient to 120°C in 1°C increments Nebulizer Gas: Nitrogen preferred Inlet Pressure: 60 to 80psig Typical Operating Range: 1.0 to3.0L/min Flow Control: Digital mass flow control Mobile Phase Flow Rate: To 5.0mL/min Analog Output: 1V or 10mV full scale Dimensions (h x w x d): 585mm x 315mm x 550mm Weight: 16Kg 230V / 50-60Hz

Labonorm Sink unit L. Gray 1330x630x870