Elga Purelab Chorus RO333 PC1 Water Purification Reinstwasser Anlage System

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

This Orbit Marine AL-7100-LCU Local Control Unit was removed from a university lab where it was surp (more)lus to requirements. The unit is in good cosmetic condition with marks from use. It has not been tested.

IKA ROTAVISC SBS hi-vi I HELI Complete Viscosity Measuring Range 80000000 mPas Speed Range 0.01 - 2 (more)00 rpm Working Temperature -100 - 300 °C Features - Features special ball bearing technology instead of a jewel bearing for enhanced robustness. - Ideal for high sample throughput, frequent spindle changes, harsh environments, or mobile laboratories. - Capable of both simple and demanding viscosity measurements, ensuring fast and accurate results. - Includes the motorized IKA HELISTAND for uniform movement of the viscometer up and down in the sample, optimizing viscosity measurement in motion. - Easy operation through intuitive menu navigation on a 4.3" TFT display, supported by digital leveling for accurate start conditions and a simple ramp function for repetitive tasks. - Allows for infinitely variable speed adjustments, the ability to set specific programs, or individual speed levels for versatile testing capabilities. *Similar Model Depicted The SBS rotational viscometers from the IKA ROTAVISC series are designed for robust performance, featuring a special ball bearing technology that excels in high throughput applications, frequent spindle changes, and challenging environments. These devices guarantee fast and precise viscosity measurements for both simple and complex fluids, ensuring reliability across a wide application spectrum. Ease of use is enhanced by intuitive navigation on a 4.3" TFT display and digital leveling, along with a motorized IKA HELISTAND that moves the viscometer uniformly for optimal measurement. With infinitely variable speed control, the ROTAVISC series offers exceptional accuracy and reproducibility, making it a versatile choice for any laboratory setting.INCLUDED: The IKA ROTAVISC SBS hi-vi I HELI Complete includes: - ROTAVISC SBS hi-vi I control - HELISTAND - T-SP-SET - SP set-2 - PT 100.8 - Guard rail - Manufacturer's Documentation - Two Year Manufacturer's Warranty

Demo item. 12 months warranty.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unrivalled functionality in a line of high-performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Parts Counting, Percent Weighing, Checkweighing, Animal/Dynamic Weighing, Filling, Totalization/Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC Display 5.7" (145 mm) Full-color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232/Ethernet (accessories sold separately) . GLP/GMP data output with real-time clock. Construction Metal base, ABS top housing, stainless steel pan, glass draftshield with top mounted side doors & flip/sliding top door, illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, 4 touchless sensors, in-use cover Design Features Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu, user selectable communication settings and data print options, user definable project and user IDs, auto standby, up to 14 operating languages Technical features: Internal Calibration: AutoCal™ - Automatic Screen: Included Lid in use: Included Linearity: ±0.0002g Minimum weight according to (USP, 0.1% typical): 0.16g Repeatability (typical): 0.0001 g Stabilization time: 2 s Tare range: to flow by subtraction

Sorvall OTD-COMBI Ultracentrifuge Lab This item was removed from a university where it was surplus t (more)o requirement. It is in reasonably good cosmetic condition and powers on. However, the door unlock switch is non-functional, therefore, preventing the unit's ability to lock or open the door. We were able to open it manually, but the automatic door open function is faulty. Therefore, it is listed as Spares/Repair. Also includes the following: Dupont Instruments Sorvall T-865.1 Rotor.Serial No: 9330329. 8 Hole rotor.Tube dimensions: 1.5cm x 8cm.

Benchmark SureTemp Dual Convection 130L Incubator The new SureTemp Incubator series provides the hig (more)hest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode or gravity convection mode. Mechanical convection incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperature. Gravity Convection eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature. The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.INCLUDED: The Benchmark SureTemp Dual Convection 130L Incubator includes: - SureTemp Data Logging Software - Internal Power Outlet - 2 Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Branson SFX150 SonifierFeatures - 40 kHz ultrasonics for quiet tabletop operation. - Sample sizes fr (more)om 0.2 to 150 mL. - High-efficiency, handheld and stand-mountable converters require no internal cooling. - Scrollable, multifunction screen with pushbuttons. - Continuous or pulsed ultrasonics. - Amplitude control range from 10 to 100%. - Microtip mode limits amplitude to 70% to extend tool life. - Control modes include time, temperature, and energy. - Advanced energy control mode delivers precise energy input in continuous or pulse modes. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and sonification duration. The Branson SFX sonifer gives users ultimate control with an amplitute range of 10 to 100% along with continous or pulsed ultrasonics. These smaller, highintensity tips are ideal for processingsmaller samples in Eppendorf vialsor similar vessels. Sizes range from3/32" to 1/4". The Sonifier® SFX150 is part of the new lineup of Sonifiers from Branson, designed to bring the industry’s most advanced sample-processing capabilities to your laboratory. Geared toward low-volume samples ranging from 0.2 to 150 mL, the Sonifier SFX150 delivers up to 150 watts of power. And at 40 kHz, it’s quiet enough to operate on a lab bench without a sound enclosure. Because it is available with either a conventional or a handheld converter, you can use the SFX150 in a stack configuration to process longer-duration samples, or process samples quickly by hand using the comfortable, ergonomically-designed handheld converter. In operation, Sonifier SFX Series monitors ongoing processes on a scrollable, digital screen, providing continuous updates of key variables including power level, energy usage, sample temperature, and experiment progress. For assured repeatability and precision on a greater scale, the SFX Series enables users to create and store up to 20 sampleprocessing programs. Program parameters include continuous or pulsed ultrasonics; time, energy, or temperature control modes; pulse on-time/energy, off-time and total on-time/energy; or amplitude as a percentage. Sonifier® SFX150 Cell Disruptors and Homogenizers Branson’s exclusive handheld converter is designed with the user in mind. The handheld converter offers an ergonomic grip for comfort and control, and a recessed pushbutton and LED indicator for assured operation. In Energy Mode, the SFX Series power supply manages the processing cycle to deliver a precise, user-determined input of ultrasonic energy (measured in joules), either continuously or in individual pulses. The SFX Series automatically compensates for any variability, extending or shortening the cycle as needed to deliver the precise energy output. Does not include Support Stand or Converter Clamp as pictured (additional cost). Please see the "Accessories" Tab Features: Click Here to View Product Video INCLUDED: The Branson SFX150 Sonifier includes: - 40 kHz Traditional Converter - 1/8" Microtip - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

IKA MultiDrive control BT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - TC 1 protective housing included for safe operation with dry samples - 5 spare seals included to extend the service life of blending tubes - USB interface for simplified actuation and documentation - Interval operation feature for efficient coarse crushing and thorough blending - Integrated cooling system in the milling cup for indirect heat dissipation - Built-in weighing function, allowing pre-crushing weighing in the same mixing cup - Batch processing capability with cutting, impact, blending, and dispersing operations - Brushless DC motor for reliable performance - Bluetooth interface for wireless communication Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,and a 1000 Watt output.Interval operation is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation. Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control BT Package includes: - 5 Spare Seals - KA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive BT 250.5 Blending tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco Fast-Freeze 45 Adapter (Stainless Steel)Fast-FreezeFlasks attach with adapters to valve por (more)ts on Labconco Drying Chambers andManifolds. Choose borosilicate glass or stainless steel adapters in 1/2"and 3/4" diameters. Click Here to View Product Video INCLUDED: The Labconco 7547400 Fast-Freeze 45 Adapter (Stainless Steel) includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty