Grant-Bio Combi-Spin PCV 2400 Zentrifuge Centrifuge 12x1,5/2ml Vortex Mixer

This Beckman Coulter Type 70 TI Centrifuge Rotor 70,000 RPM was removed from a university lab where  (more)it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Capacity: 8 x 25ml Max RPM: 70,000

Thermo Scientific Heraeus Biofuge Primo R Centrifuge This item was removed from a university where i (more)t was surplus to requirements. The centrifuge is in very good cosmetic condition and has been tested to confirm functionality. Specifications: - Model: Heraeus Biofuge Primo R - Included: - Swing-Bucket Rotor - 7591 - 4 x Buckets with clear adaptors, each holding 3 x 5ml tubes.

Centrifuge FC5513-K, Frontier™ 5000 Ohaus, with rotor Designed to be comfortable and practical, Fron (more)tier Micro centrifuges feature an intuitive control interface that is easy to operate even when wearing gloves. Micro centrifuges save valuable bench space by integrating all of their functionality into a small footprint. Frontier Micro centrifuges offer high-speed operation for a range of essential laboratory applications, such as DNA/RNA preparation, ultrafiltration and more. Additionally, biocontainment rotors allow for research with hazardous samples. The equipment is completed by a silent brushless motor, high sample productivity, multi-safety control, customized programs. Included in the FC5513-K model you will get the angle rotor with maximum capacity of 24 x 1.5 / 2.0ml. Features: Maximum relative centrifugal force (x g) at 17,317 g; maximum speed 13,500 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 85 mm; 45° angle. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN - Simple and modern interface, to set parameters easily - The display shows both the set and real parameters - Clear and right display STRUCTURE AND FUNCTIONALITY - The panel is splash proof to protect the centrifuge from accidental sample spills - The maintenance-free induction motor produces G-force max. of 17317×g - Speed ​​up to 13500 rpm in less than 15 seconds (with microtubes) - 10 acceleration/deceleration settings - 99 memory sets for quick storage and easy recall of used parameters - Rotor imbalance detection systems shut down the unit when loads are out of balance TECHNICAL FEATURES Speed ​​range: 200 rpm - 13,500 rpm Maximum relative centrifugal force: 17,317 g Maximum flow rate (rotor): 24 x 1.5 / 2.0ml Program memories: 99 Rotor Packaging: Angled Rotor: 24 x 1.5 / 2.0ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Pre-refrigeration time: not applicable Rotor Compatibility: Angled 24 x 1.5ml / 2.0ml; angled 24 x 1.5ml / 2.0ml sealable; Hematocrit rotor, 24 x capillaries; corner 18x2ml spin columns Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

Maximum capacity: 4 x 500 ml Maximum permissible density: 1.2 kg/dm³ Speed range: 100 – 15000 rpm Te (more)mperature setting range: -20°C to 40°C Minimum rotor temperature: < 4°C Maximum kinetic energy: 63097 Nm Dimensions (WxDxH): 570 x 650 x 489 mm Weight: 124 kg Equipped with: 1x Sigma 11150 swing-out rotor (max 5100 rpm) 4x Sigma 13215 bucket 4x Sigma 18015 insert (12 positions, ØxD: 17 x 90 mm)

This Jouan B4i Benchtop Centrifuge was removed from a university lab where it was surplus to require (more)ments. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. This item includes the following rotor: Thermo Jouan High Throughput Swing-Out Rotor Model S40Max Load 2.00kgMax speed 4300 (rpm) This item ran at 4000rpm with S40 Rotor fitted.As stated in the manual, the maximum speed for a swing-out rotor on this unit is 4000 rpm.

Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixe (more)d Angle Rotor is a whisper quiet microcentrifuge offering an outstanding set of features for a broad range of molecular and cell biology applications. Short runs up to 12 minutes are whisper quiet at an average noise level of 45 dB(A) and maximum RCF of up to 21,300 x g. This is sufficient for centrifugation steps of most routinely used DNA/RNA purification kits. The 5425 also features a wide speed range, with a minimum speed of 100 RPM and a maximum speed of 15,060 RPM. With a comprehensive range of 6 rotors as well, this broadens the spectrum of applications of the 5425. The included FA-24x2 Fixed Angle Rotor reaches a maximum speed of 15,060 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor includes: - FA-24x2 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor SpecificationsMaximum Speed15,060 RPMMaximum RCF21,300 x gMaximum Capacity24 x 1.5/2.0 ml 10 x 5.0 mlTemperature RangeN/ATimer10 seconds to 9:59 hours, with continuous runAcceleration Time15 secondsDeceleration Time15 secondsDimensions (W x D x H)9.45 x 15.35 x 9.45 in. (24 x 39 x 24 cm)Weight34.39 lb. (15.6 kg)Electrical Requirements120V, 50/60Hz, 3.8A, 280WRefrigerationNo Refrigeration

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This was removed form a unuiversity lab where it was surplus to requirements. The unit did not power (more) up in testing. We are advised it has a board fault. It is sold for spares/repairs.

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 50 g), plastic box Number of (more) pieces in the set: 8

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 500x500 mm.

Heidolph Orbital Rotamax 120 Platform Shaker The compact one with a maximum loading capacity of 2 kg (more). Space-saving and with a load weight of up to 2 kg, thisshaker can perfectly master all applications. The variably adjustable speed control (20-300 rpm) and theorbit of 20 mm guarantee homogeneous distribution. Your applications can becarried out in continuous operation or by means of a timer (max. 120 minutes). INCLUDED: The Heidolph Orbital Rotamax 120 Platform Shaker includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 3 Year Manufacturer's Warranty