Labconco 700611200 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve & Mini Chamber 115V, 60Hz

Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz Collector Temperature  (more) -85°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz includes: - Vacuum Hose - 2 x Hose Clamps - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -84 C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collect (more)or, Purge Valve Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level INCLUDED: The Labconco 710622100 FreeZone 6L -84 C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -84C Console Freeze Dryer with Stoppering Tray Dryer and stainless steel coil a (more)nd collector Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers with Stoppering TrayDryers are designed for lyophilizing moderate to large loads and stopperingvials or serum bottles under vacuum. The console features a front viewingwindow and interior space for a vacuum pump (sold separately). The console'supright stainless steel collector coil holds 6 liters of ice before defrosting.Two 1/3 hp HCFC/CFC-free refrigeration systems cool the collector to -84C(-119F), suitable for low eutectic point samples including acetonitrile. TheStoppering Tray Dryer features three 16.5" x 12" processing shelves.A single 1 hp HCFC/CFC-free refrigeration system and 1000-watt electric heatercool and heat the fluid medium circulating through channels in the shelves.Lyo-Works™ OS provides a real time display of freeze dryer and tray dryerparameters on a 5" full color, capacitive touch screen. Models with PTFE-coatedcollectors that can withstand corrosive compounds are available.Features Upright stainless steel collector coil holds 6L of ice before defrosting Environmentally-friendly HCFC/CFC-free refrigeration system cools the collector to -84C (-119°F) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. The console provides interior space for vacuum pump (sold separately) Lyo-Works OS provides real time display of collector temperature and vacuum level Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone™ exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors provide up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C INCLUDED: The Labconco 710621000 FreeZone 6L -84C Console Freeze Dryer with Stoppering Tray Dryer and stainless steel coil and collector 115V, 60Hz includes: - Three 16.5" x 12" Processing Shelves - Three Thermocouples - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 4.5L -84C Benchtop Freeze Dryer with PTFE coil and collector Features - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 4.5 Liter Benchtop Freeze Dryers are designed forlyophilizing light to moderate sample loads. The compact design is ideal forlabs with limited floor space. The upright stainless steel collector coil holds4.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigerationsystems cool the collector to -84C (-119F), suitable for low eutectic pointsamples including acetonitrile. Lyo-Works™ OS provides a real time display ofcollector temperature, vacuum level and optional End-Zone™ end point detectionsystem, shown on a 5" full color, capacitive touch screen. Models with PTFE-coatedcollectors that can withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 4Lof ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Internal coil maximizes vapor-trapping efficiency Optional PTFE-coated collectors withstand corrosive compounds Lyo-Works OS provides a real time display of collector temperature and vacuum level FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 710402000 FreeZone 4.5L -84C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 4.5L -84C Benchtop Freeze Dryer with stainless steel coil and collector Features - (more) Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 4.5 Liter Benchtop Freeze Dryers are designed forlyophilizing light to moderate sample loads. The compact design is ideal forlabs with limited floor space. The upright stainless steel collector coil holds4.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigerationsystems cool the collector to -84C (-119F), suitable for low eutectic pointsamples including acetonitrile. Lyo-Works™ OS provides a real time display ofcollector temperature, vacuum level and optional End-Zone™ end point detectionsystem, shown on a 5" full color, capacitive touch screen. Models with PTFE-coatedcollectors that can withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 4Lof ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Internal coil maximizes vapor-trapping efficiency Optional PTFE-coated collectors withstand corrosive compounds Lyo-Works OS provides a real time display of collector temperature and vacuum level FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 710401000 FreeZone 4.5L -84C Benchtop Freeze Dryer with stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE CoatedFeatures - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of PTFE coated 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV5 Rotary Vane Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE Coated includes the Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE coil and collector, Labconco 7522801 12-Port Drying Chamber PTFE-Coated, and an Edwards RV5 Rotary Vane Vacuum Pump. The Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE Coil and Collector is designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright PTFE collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50C (-58F), suitable for aqueous samples. The Labconco 7522801 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel with corrosion-resistant PTFE-coated interior. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV5 Rotary Vane Vacuum Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE Coated includes: - Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE Coil and Collector - Labconco 7522801 12-Port Drying Chamber, PTFE-Coated - Edwards RV5 Vacuum Pump - All Vacuum Tubing - Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato FO-100CR Muffle Furnace with Communication Port 1.5L, 115V Operating Temperature Range 100°C (more) to 1150°C Max. Temperature Reaching Time ~60 min. Internal Capacity 1.5L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 1.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-100CR Muffle Furnace with Communication Port 1.5L, 115V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex Fixed Angle Rotor 2mL x 30 The Scilogex Fixed Angle Rotor 2mL x 30 has the capacity to acco (more)modate 20 x 2mL tubes and can a reach maximum speed of 15,000RPM. For use with the DM0636 centrifuge. INCLUDED: The Scilogex Fixed Angle Rotor 2mL x 30 includes: - Cover - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz Working Temperature Range 20°C to 300°C Heatin (more)g Capacity 3000W Fluid Type Water, Silicone Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in cooling coil and drain tap The Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz with 6L bath tank and lid with 3kW heating power to +300°C. Large, color touchscreen UI with built-in help functions. For internal and external temperature applications. Includes Intelligent Cascade Control, self-optimizing for optimum results with settings for band limit, limit setting, co-speed factor and control dynamics. A variable speed pressure / suction pump provides strong circulation for internal or external applications. A built-in cooling coil enables counter cooling with tap water. Barbed fittings for 8 and 12 mm ID tubing are included (pump connections M16x1 male). Includes Pt100 connection for external monitoring and control, electronically adjustable pressure/suction pump, RS232/RS285, USB and Ethernet ports with optional slot for analog communication (requires module 9900100). Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark C3303-6HP Sprint 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor, 115V The Bench (more)mark C3303-6HP Sprint 6H Plus Clinical Centrifuge is an advanced centrifuge designed for clinical applications. With a 6 position horizontal (swing out) rotor, this centrifuge can hold all common blood collection tubes up to 15ml, making it a versatile instrument for a range of applications. The centrifuge has a US Plug and is compatible with 115V, which makes it easy to use and accessible in a range of settings.The centrifuge features a back-lit, liquid crystal display that allows for digitally set speed in rpm or rcf (up to 4,000rpm/2,850xg) and adjustable speed in increments of 100rpm. This digital display ensures precision control and accuracy during the centrifugation process. Additionally, the adjustable acceleration and deceleration levels provide even more control over the speed and timing of the centrifugation process.The safety imbalance detection system and momentary operation also add to the safety and convenience of the Benchmark C3303-6HP Sprint 6H Plus Clinical Centrifuge. This centrifuge is a reliable and efficient choice for a range of clinical applications.INCLUDED: The Benchmark C3303-6HP Sprint 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor, 115V includes: - 6 x 15ml Swing Out Rotor - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

0