ALA Scientific Instruments BPS-8 Valve Control System Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Severn Instruments PCV-3000 Gate Control Valve This was removed from a university lab where it was s (more)urplus to requirements. The unit has not been tested. It is in reasonable cosmetic condition but has lots of marks from age and use.

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr) This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN3/2051Serial No. 1616Manufactured 30.06.16Output 2051 KW/hr 7.0 MBtu/hr Dungs gas train valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter Caldaia A Condensazione control box with probes and a programmable thermostat to control the boiler at lower temperatures. With Autoflame Combustion Management SystemPart Nos. MM10005, MM10004 Serial Nos. 21549, 53299 TEC 5.5KW 415 volt fan motor Type 5.523TECAB35-IE3 T3A 13251-22.5" gas inlet pipe

Labconco FreeZone Stoppering Tray Dryer with 6-Port Manifold and IsolationValve FreeZone Stoppering (more) Tray Dryers lyophilize moderate to largeloads of vials or serum bottles and stopper them under vacuum. They offertemperature control from -40 to +40C. Options include a 6-port manifold,isolation valve and sample trays. A pneumatic mechanism stoppers containers undervacuum on three large adjustable processing shelves, 16.5” x 12” each. AnHCFC/CFC-free refrigeration system and electric heater cool and heat fluidmedium that is circulated through the shelves to maintain shelf temperatureswithin ±1C. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen. Features Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors Chamber pre-freezes samples to save time and money by eliminating need for separate freezer and product transfer Up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C 1/8 in. OD backfill port introduces sterile air or inert gas from outside source to chamber, protecting samples from atmospheric moisture and contaminants Lyo-Works™ OS provides real time display of freeze dryer and tray dryer parameters on 5 in. full color, capacitive touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) Microprocessor-based controller allows up to 30 different temperature programs to be stored and repeated, each using up to 16 different steps Display provides navigation to manual or program mode, probe temperatures, vacuum in mBar, Torr or Pa, step of program in progress, time remaining in present step, and end of program, as well as alarms Optional 6-Port Tray Dryer Manifold accommodates either 1/2 in. or 3/4 in. flask adapters and connect to flasks and other glassware Optional built-in isolation valve separates Stoppering Tray Dryer from freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide means for determining end point Freeze dryer, vacuum pump with displacement of at least 163L/minute, and freeze dry glassware (if not bulk freeze drying) are required (not included) INCLUDED: The Labconco 794801300 FreeZone Stoppering Tray Dryer with 6-Port Manifold and IsolationValve 115V, 60Hz includes: - Sample Temp Sensor x 3 - Communication Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve Features -  (more)Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700612100 FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

rack of 36 stainless steel test tubes D20/21mm In stainless steel laboratory rack of 36 tubes (9 out (more) of 4) For tube diameter: 20 or 21 mm

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab This item was removed from a univ (more)ersity laboratory where it was surplus to requirements. The item powers on and is in a reasonable used cosmetic condition.It includes 4 shelves but has only 4 pegs, so only one shelf can be fitted currently. There are only two doors at the bottom. During testing, the freezer was set to its minium temperature of -86ºc, but would not drop below -19ºc.Therefore, it is listed as Spares/Repair and no further testing was conducted. Specifications:- Model: U570 -86 - Serial No.: 1004-5204-1103

A&D Weighing Apollo GX-324AEN Analytical Balance, 320 g, 0.1 mg (NTEP Class I) Capacity 320 g R (more)eadability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-324AEN Analytical Balance, 320 g, 0.1 mg (NTEP Class I), provides high-precision measurements with a 320 g capacity and 0.0001 g readability. This NTEP-certified balance ensures accurate, reliable results for regulated environments. It includes a fanless ionizer, standard in AEN models, which neutralizes static charges without contact, ensuring stable, disturbance-free weighing. An external IR sensor enables touch-free operation, preserving cleanliness and enhancing accuracy by allowing users to interact with the balance without direct contact. The Electronically Controlled Load (ECL) management system supports repeatability testing and automatic precision checks without external weights, further reinforcing measurement reliability. The GX-324AEN features a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput settings where speed and accuracy are critical. Streamlining daily operations and ensuring USP41 compliance, this advanced tool alerts users when sample sizes fall below minimum weight, reducing waste and boosting efficiency. Impact shock detection and overload protection provide added durability, while six simple keys and a quick toggle function facilitate smooth switching between USB and RS-232C communication options for flexible data management. Enhanced usability features include an illuminated, front-mounted level for easy leveling, even with gloves on, along with automatic self-calibration and one-touch internal/external calibration to ensure valid results. An extensive range of measurement units, along with percent calculation and piece counting capabilities, add versatility for diverse scientific applications. With a robust design, NTEP certification, and advanced features like the IR sensor, the A&D Weighing Apollo GX-324AEN Analytical Balance is an outstanding choice for professionals seeking precise, regulated analytical capabilities. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-324AEN Analytical Balance, 320 g, 0.1 mg (NTEP Class I) includes: - Touchless IR Switch - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The PT0287 cable is an RS232 cable that connects the RTP-RU80 printer to scales equipped with an RS2 (more)32 connector (DB9 M). These are the WTC and WLC scales and scales featuring the PUE C315, PUE C32, and PUE 7.1 indicators and terminals. The standard length of the PT0232 cable is 1.7 m.

Gilson Pipetman Neo P2N PipetteFeatures - Redesigned tip ejector and ejection springs reduces tip ej (more)ection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman Neo P2N Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo P2N Pipette Specifications ModelP2N Cat # F144561 Volume (ul)0.2 0.52Max. Permissible Systemic Error (ul)± 0.024± 0.025± 0.030Max. Permissible Random Error (ul)≤ 0.012≤ 0.012≤ 0.014Comparison of Neo PipettesP2NP10NP20NP100NP200NP1000NVolume (ul)0.2 0.5 21 5 102 10 2010 50 10020 100 200100 500 1000Max. Permissible Systemic Error (ul)± 0.024 ± 0.025 ± 0.030± 0.025 ± 0.075 ± 0.100± 0.10 ± 0.10 ± 0.20± 0.35 ± 0.40 ± 0.80± 0.50 ± 0.80 ± 1.60± 3.0 ± 4.0 ± 8.0Max. Permissible Random Error (ul)≤ 0.012 ≤ 0.012 ≤ 0.014≤ 0.012 ≤ 0.030 ≤ 0.040≤ 0.030 ≤ 0.050 ≤ 0.060≤ 0.10 ≤ 0.12 ≤ 0.15≤ 0.20 ≤ 0.25 ≤ 0.30≤ 0.6 ≤ 1.0 ≤ 1.5.comparison-table tr td:nth-child(2) { background-color: #fffacd;}