Pfeiffer System, D-35614, TCU 330, DCU Vacuum, MVP 070-3C w/ PC & Software Lab

This item has just arrived in our stock. Please enquire for further details.

Vacuum controller GLAS KELLER VOLTASTRESSE 102.

Scilogex SCI100VC Benchtop Vacuum Controller, 100-230V The Scilogex SCI100VC Benchtop Vacuum Control (more)ler with most vacuum sources including diaphragm pumps, piston pumps, and rotary vane pumps, this smart controller provides the users the freedom to start and leave their operation thanks to its smart features. Control technology, evaporation detection, and its intuitive graphical interface make vacuum controlling user-friendly for vacuum laboratory, rotary concentrators, parallel evaporators, desiccation, and distillation applications. INCLUDED: The Scilogex SCI100VC Benchtop Vacuum Controller, 100-230V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF VC 900 Vacuum Controller, 100-240V Measurement Range 0 to 1100 mbar Measurement Accuracy ± 1 mb (more)ar Protection Class IP30 Features - Simple, versatile vacuum control with digital display - Simple, intuitive operation - Compatible with virtually all diaphragm vacuum pumps - Four different operating modes - Enables variable speed control and automatic pressure detection when paired with KNF N 920 G, N 820 G and N 840 G pumps - USB interface for PC control - Separate control unit with pressure sensors and two-step controlled valve to be placed independently from the operating unit The KNF VC 900 Vacuum Controller, 100-240V is an independent control unit for any vacuum source. Features a touchscreen control, pressure sensors, and a two-step-controlled valve. Optimizes lab bench space by allowing hands-free operation of the central vacuum unit. INCLUDED: The KNF VC 900 Vacuum Controller, 100-240V includes: - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VC 10 lite Input Pressure 1 to 1,050 mbar Measurement Range 1 to 1,100 mbar Temp. Measuring Max. 200 (more)°C Features - Valve cleaning function for long service life - High energy efficiency thanks to device-to-device communication: control of the circulator by connecting the vacuum controller with PC 1.3 data cable (available as accessory) - Integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion - VENT short key button allows pressure equalization during a running process - Program function: up to ten user-defined programs can be saved, with up to ten pressure/time sequences - USB / RS232 interfaces for connection with the laboratory software labworldsoft® - Electronic control system for improved process efficiency and higher solvent recovery rate - High energy efficiency thanks to device-to-device communication (vacuum controller to recirculating chiller) The IKA VC 10 lite VC 10 Vacuum Controller is a highly efficient and versatile device designed for optimal vacuum control in laboratory settings. It features a valve cleaning function for long service life and high energy efficiency through device-to-device communication. The controller can connect to a circulator via a PC 1.3 data cable (available as an accessory) for enhanced control. It includes an integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion. The VENT short key button allows pressure equalization during a running process. The program function supports up to ten user-defined programs with up to ten pressure/time sequences. Equipped with USB and RS232 interfaces, it easily connects with the lab software labworldsoft®. The electronic control system improves process efficiency and solvent recovery rate. The device supports a wide range of connection diameters and pressure units and features a ceramic Al2O3 vacuum sensor for accurate measurements. With a control range of 1 - 1100 mbar and a resolution of 1 mbar, it ensures precise vacuum control. The vacuum controller also includes a timer, temperature measurement capabilities, and a graph function. Compact and lightweight, with dimensions of 95 x 150 x 110 mm and a weight of 1.284 kg, it is suitable for various laboratory applications, offering robust performance and user-friendly operation.INCLUDED: The IKA VC 10 lite VC 10 Vacuum controller includes: - VC 10 lite - USB Cable - USB A to Micro-B, 2 m - Two Year Manufacturer's Warranty

Temperature range: -5°C to -25°C Control unit: Gram Control Unit with voltage free contact, alarms a (more)nd offset function Alarms: Acoustic and visual, High/Low temperature alarms and door alarm Access port: 1 pcs. Ø 24.5 mm Defrost system: Automatic smart defrost with re-evaporation of the defrost water Dimensions (WxDxH): 600 x 731 x 2000 mm Net volume: 303 litres Net weight: 112 kg

Microtome 2045C with angle oriented Specimen head. Motorized advance of Specimen head with two speed (more)s. Chamber temperature adjustable to -40°C. Quick freeze shelf to -50°C. Trimming at 5, 10, 30, 50, 100, 150 microns. Automatic 24 hour Defrost cycle. Display counter for every section.

Tecan Hydrospeed microplate washer. For 96-well and 384-well plates. Indexable 96-pin wash head. Was (more)h volume 50 - 3000 μl in 50 μl increments (96-well plates); 10 - 1000 µL in 10 µL increments (384-well plates). Dosing accuracy 3 - 4% uniformity across the entire plate. Dispensing volume 50 - 400 μl in 50 μl increments (96-well plates); 10 - 120 µL in 10 µL increments (384-well plates). Primer and rinse volume 100 - 800 ml. Residual aspiration volume <2 μl. Linear stirring at three different intensities. Wash/Waste Bottle Capacity 2 x 4 L wash bottles, 1 x 10 L waste bottle and 1 x 4 L foam trap bottle. Dimensions 388*430*288 mm; 15 kilos. User manual. The HydroSpeed is Tecan’s advanced plate washer, designed for quick, parallel washing of entire 96- and 384-well plates. This avoids time differences between the wells for uniform results. In addition, the HydroSpeed provides full control of wash power for optimized washing of cells, beads and ELISAs.

Overhead track scale H315 series is designed for weighing half carcass and porkhalf which are transp (more)orted on scale&rsquo;s track. The weighing process starts when a roller with measured load enters a measuring section of the track. The load cells are installed lengthwise to the weighing track which is fixed with spherical mandrels. Such design eliminates tensions in the construction. Scales can cooperate with carcass grading equipment. The H315 series is manufactured either in galvanized or in stainless steel version, as dual range weighing instruments. They are equipped with a stainless steel backlit LCD indicator PUE H315 installed on a cable.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Eppendorf 6 x 7-17ml Adapters, Cat. # 022637584 New in box Eppendorf 6 x 7-17ml Adapters, Cat. # 022 (more)637584 for the A-4-44 rotor. This is a 2 piece set, and the adapters are new in their packaging. To be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 6 x 7-17ml Adapters, Cat. # 022637584 includes: - Full 6 Month Parts and Labor Warranty