Crest P1200HT-45 Digital Ultrasonic Cleaner

Branson CPX8800H Digital Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wav (more)es and creates consistent cavitation throughout the tank. - 40 kHz rugged industrial transducers. - 99-minute digital timer and continuous ultrasonic operation. - Can be heated up to 69°C/156.2°F and set for either Fahrenheit or Celsius. - Last stored parameters are recalled when unit is turned back on. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and ultrasonic duration. Bransonic baths completely remove flux and contaminants from such precision parts as PC boards, SMDs, quartz crystals, capacitors, and many others. Branson ultrasonic cleaners can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids. Bransonic CPXH heated ultrasonic baths are the most technologically advanced ultrasonic baths available. With programmable features, digital operation with power tracking capabilities to adjust for light or heavy loads, high/low power control, and degassing, the CPXH is the most versatile system available. The CPXH baths offer the following features: The CPXH degassing period can be set up to 99 minutes. Extended degas time periods allow for “beyond cleaning” applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing, and dispersion of particles. Constant activity/power tracking automatically maintains the same ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Consult with your Branson representative about the Bransonic accessories and solution best suited for your application needs. Visit us at www.Bransonic.com Bransonic® CPXH Ultrasonic Baths The CPXH Series is completely programmable. Once the process is entered into the controller, the end user only has to start the program and they are free to leave the unit on its own to do the job. The programmable process allows the process engineer to choose the temperature set point at which the degassing and ultrasonic time periods are triggered to begin. Once the CPXH ultrasonic run time period is reached, the unit shuts off, delivering the same results – every time. When the process temperature reaches the programmable set point, the ultrasonic cycle begins. This includes selectable times for both degas and ultrasonic processing. When cleaning delicate parts, the CPXH allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process. Click Here to View Product Video INCLUDED: The Branson CPXH8800 Digital Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Crest P1200D-45 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced transduce (more)r technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P1200D-45 Ultrasonic Cleaner with Power Control combines advanced technology with user-friendly features, making it an essential tool for precision cleaning applications. Featuring ceramically enhanced transducer technology and homogenous sound field distribution, it operates at a frequency of 45 kHz, ensuring thorough cleaning and enhanced sample preparation capabilities. With adjustable cleaning time and bath temperature ranging from 20°C to 80°C, it offers versatility for various cleaning needs. The "D" models include nine-step ultrasonic power adjustment and a Degas function, optimizing cleaning performance. Its deep-drawn stainless-steel tank with rounded corners facilitates easy cleaning, while an intrinsically safe heater with dry-run protection ensures safe operation. Ideal for removing flux from PCBs, oils, paints, and other contaminants, the Crest P1200D-45 guarantees reliable performance backed by a 2-year manufacturer's warranty. INCLUDED: The Crest P1200D-45 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Crest P1800D/HF-132 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced trans (more)ducer technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P1800D/HF-132 Digital Ultrasonic Cleaner with Power Control combines advanced technology with user-friendly features, making it an essential tool for precision cleaning applications. Featuring ceramically enhanced transducer technology and homogenous sound field distribution, it operates at a frequency of 45 kHz, ensuring thorough cleaning and enhanced sample preparation capabilities. With adjustable cleaning time and bath temperature ranging from 20°C to 80°C, it offers versatility for various cleaning needs. The "D" models include nine-step ultrasonic power adjustment and a Degas function, optimizing cleaning performance. Its deep-drawn stainless-steel tank with rounded corners facilitates easy cleaning, while an intrinsically safe heater with dry-run protection ensures safe operation. Ideal for removing flux from PCBs, oils, paints, and other contaminants, the Crest P1800D/HF-132 guarantees reliable performance backed by a 2-year manufacturer's warranty. INCLUDED: The Crest P1800D/HF-132 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Crest P2600D/HF-132 Digital Ultrasonic Cleaner w/ Power Control, 230VFeatures - Ceramically enhanced (more) transducer technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P2600D/HF-132 Digital Ultrasonic Cleaner w/ Power Control, 230V, is an advanced cleaning unit designed for optimal performance and versatility. Operating at an ultrasonic frequency of approximately 132 kHz, it features ceramically enhanced transducer technology with industrial bonded assembly for a homogenous sound field and effective energy distribution. The unit offers an adjustable timer for ultrasonic operation, ranging from 1 to 99 minutes or continuous operation, and an integrated heater with a liquid temperature adjustable up to 80°C in 1K increments. The "D" model allows for ultrasonic power adjustment in nine steps from 40% to 100%, along with a Degas function for consistent sample preparation. The deep-drawn stainless steel cleaning tank, with its rounded corners, ensures easy maintenance, while the intrinsically safe heater with dry-run protection guarantees safe operation. With a substantial tank capacity of 7 gallons (26.1 liters) and an average ultrasonic power of 300 watts, this cleaner is ideal for extensive cleaning applications. Additionally, it includes a drain valve assembly for tanks with capacities of 2.5 gallons or more, enhancing usability and efficiency. The Crest P2600D/HF-132 Digital Ultrasonic Cleaner w/ Power Control, 230V is brand new in box. INCLUDED: The Crest P2600D/HF-132 Digital Ultrasonic Cleaner w/ Power Control, 230V includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Crest P2600D-45 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced transduce (more)r technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P2600D-45 Digital Ultrasonic Cleaner w/ Power Control is a state-of-the-art cleaning solution designed for superior performance and efficiency. Featuring ceramically enhanced transducer technology with industrial bonded assembly, it ensures a homogenous sound field and even energy distribution through frequency sweeping at 45 kHz. This cleaner offers adjustable cleaning time from a few minutes to continuous operation and an adjustable bath temperature between 20°C to 80°C. The "D" model includes adjustable ultrasonic power in nine steps and a Degas function for consistent sample preparation. Its deep-drawn stainless steel cleaning tank has rounded corners for easy cleaning, and the intrinsically safe heater includes dry-run protection. With a tank capacity of 7 gallons (26.1 liters) and an average ultrasonic power of 300 watts, it is ideal for larger cleaning tasks. Additionally, it features a convenient drain valve assembly for tanks with capacities of 2.5 gallons or higher, enhancing usability and efficiency. INCLUDED: The Crest P2600D-45 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

This listing is for a Fisher Scientific FB120 Sonic Dismembrator.The unit is in full working conditi (more)on and is ready for immediate release.This unit is supplied with a Fisherbrand Sound Enclosure.The Fisher Scientific FB120 Sonic Dismembrator is a versatile device designed for efficient analysis and sample preparation, particularly suited for small volumes. Whether for cell disruption, protein extraction, or DNA shearing, this sonic dismembrator ensures consistent, reproducible results across a wide range of applications.Key Features:Manual and Programmable Operation: Offers both manual control and programmable settings for enhanced flexibility, allowing you to set specific processing parameters from 1 second to 10 hours for tailored sample preparation.Volume Range: Capable of processing volumes from 0.2 to 50 mL, making it ideal for small-scale experiments.Power and Performance: Operates at 120 watts, ensuring efficient sample processing with precise energy application.Pulse Mode Functionality: Features a pulse mode that allows for intervals from 1 second to 59 seconds, providing control over the intensity and duration of sonication.Energy Display: Real-time monitoring of energy output in watts and joules, giving insight into the processing conditions.Specifications:Voltage Options: Available in two configurations:110/117 V, 50/60 Hz220/230 V, 50/60 HzDimensions: 13.5 x 8 x 6 in. (34.29 x 20.32 x 15.24 cm), designed for compact laboratory spaces.

Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Conne (more)ction NW40 Pumping Speed Nominal 2,820.00 l/min Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics. The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller. nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller. The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Click Here to View Product Video INCLUDED: The Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

Thermo Scientific 75003608 Round Buckets for TX-750 Rotor The Thermo Scientific 75003608 Round Bucke (more)ts are designed to be used with the TX-750 Swing Bucket Rotor, and are capable of a maximum speed of 4,700 RPM and a maximum RCF of 4,817 x g. These buckets have a maximum capacity of 4 x 750ml and are made from high-quality materials that can withstand the rigors of high-speed centrifugation. However, it is important to note that no adapters or lids are included with this set of buckets. These round buckets are a versatile option for laboratories looking to process large volumes of samples, such as those used in cell culture or bioprocessing. Their compatibility with the TX-750 Swing Bucket Rotor allows for efficient and reliable centrifugation, and their high-speed capabilities make them suitable for a wide range of applications. While adapters and lids are not included with this set of buckets, they can be purchased separately to enhance their functionality and compatibility with different sample types. Overall, the Thermo Scientific 75003608 Round Buckets are a reliable choice for laboratories looking to process large volumes of samples with a high degree of efficiency and consistency. INCLUDED: The Thermo Scientific 75003608 Round Buckets for TX-750 Rotor includes: - Set of 4 x 75003608 Round Buckets - Full 1 Year Parts and Labor Warranty Thermo Scientific 75003608 Round Buckets for TX-750 Rotor SpecificationsMaximum Speed4,700 RPMMaximum RCF4,817 x gMaximum Capacity4 x 750mlMaximum Radius19.5 cmRotor CompatibilityTX-750 Swing Bucket RotorDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

MARSHALL Select MS-MM1500 Microplate Mixer, 0-1,500 RPM Speed Range 50 to 1,500 RPM Orbital Diameter (more) 4.5mm 2 x Microplate Speed 1,000 RPM Features - Adjustable from 0 to 1,500 RPM for versatile mixing applications - Features a 4.5mm orbital diameter for effective and thorough sample agitation - Weighs only 5 lbs for easy portability and handling - Maintenance-free motor ensures long-lasting, reliable performance - Compatible with optional adapters for various mixing needs, including test tube applications The MARSHALL Select MS-MM1500 Microplate Mixer is a versatile and efficient tool designed for a wide range of mixing applications. With a speed range of 50 to 1,500 RPM and a 4.5mm orbital diameter, this mixer offers precise control and flexibility to suit various laboratory needs. Its compact design, with dimensions of 10"L x 6"W x 3"H and a lightweight of 5 lbs, makes it an ideal addition to any lab space. The mixer features a maintenance-free brushless DC motor, ensuring reliable performance and longevity. It operates within a temperature range of 5 to 40°C and a maximum humidity of 80%, making it suitable for diverse environments. Compatible with 110V, 60Hz power supply, and requiring only 20W of power, the MS-MM1500 is an energy-efficient choice for efficient sample processing. For specific test tube applications, the mixer can be used with optional adapters, including the PS1.1 adapter. INCLUDED: The MARSHALL Select MS-MM1500 Microplate Mixer, 0-1,500 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-37784 Finnigan MAT GCQ Gas ChromatographITEM-37773 TC Electronic RS 410ITEM-17249 Perkin Elmer DNA Thermal Cycler LabITEM-23961 2 x Faulty De Soutter Medical Clean Cast Systems CCS5 X2 -ITEM-24233 Sutter Industries Lambda 10-B Smart Shutter Wheel Drive ControllerITEM-35358 CETI TOPIC-B Laboratory Compound Binocular Microscope w/ 3 ObjectivesITEM-37878 ATB MOTOR ABF 63/4A-7QR Vacuum PumpITEM-29867 Eurotherm 903P/IS/HLO//ARE/SRE/VH/XN///LE IT/HAP//AP/SP////0/1200/C/05ITEM-24225 MSE Micro Centaur CentrifugeITEM-38498 UNI-T UT804 True RMS MultimeterITEM-38762 A Pair of Bio-Rad 1000/500 Electrophoresis Power Supplies

Automatic checkweigher DWT/RC series is a device designed to control heavy loads or cumulative produ (more)cts. It provides full control of goods transported on a processing line. The device is manufactired in a stanless steel version. Automatic scale DWT/RC series is equipped with a terminal HY series ensuring stability and reliability of operation. The HY controller despite simple construction provides extended possibilities of cooperation with peripheral devices and supplies a set of informative-controlling signals which simplify integration with a processing line. The terminal HY series features full alphanumeric keyboard, and touch screen display which enables very simple and intuitive checkweigher operation. Application: Automatic checkweigher DWT/RC/HY series is designed to control single goods according to customers regulations or according to current regulation on Control of Packaged Goods. The checkweigher can operate in dynamic or static mode. DWT/RC series is attested by NIH. Main applications: · agri-food industry, · chemical industry · meat industry · tobacco industry · distilling industry, · engineering industry, · brewing industry, · transport, shipping. Functions Control of goods in accordance with regulation on Control of Packaged Goods, Control of goods in accordance with customer regulations, Acquiring data on controlled goods, Database of products, Database of operators, Definable access levels for scale users, Statistics conducted in real time, Reports generated automatically in accordance with the weighing mode Cooperation with peripheral devices in a processing line, Remote control, Cooperation with computer software, Static weighing mode. Cooperation with peripheral devices Automatic checkweigher DWT/RC series is prepared to cooperate with peripheral devices, and devices form a processing line. I/O set provides broad configuration possibilities and full integration of the scale with an existing processing line. Printout on thermal printers, Remote control, Records on weighments stored on an external computer, Control over additional conveyors, Cooperation with dosing device with feedback. Implementation options: Feeding conveyor with function of separating packages, Discrimination of defective goods by weight, Separate discriminating set for "too light" and "too heavy" goods, Sounder and/or Warning tower lights, Cooperation with dosing device with feedback, Cooperation with printer, Software for keeping records from weighing processes.