Crest P1100HT-45 Digital Ultrasonic Cleaner

This item has just arrived in our stock. Please enquire for further details.

Branson CPX5800H Digital Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wav (more)es and creates consistent cavitation throughout the tank. - 40 kHz rugged industrial transducers. - 99-minute digital timer and continuous ultrasonic operation. - Can be heated up to 69°C/156.2°F and set for either Fahrenheit or Celsius. - Last stored parameters are recalled when unit is turned back on. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and ultrasonic duration. Bransonic baths completely remove flux and contaminants from such precision parts as PC boards, SMDs, quartz crystals, capacitors, and many others. Branson ultrasonic cleaners can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids. Bransonic CPXH heated ultrasonic baths are the most technologically advanced ultrasonic baths available. With programmable features, digital operation with power tracking capabilities to adjust for light or heavy loads, high/low power control, and degassing, the CPXH is the most versatile system available. The CPXH baths offer the following features: The CPXH degassing period can be set up to 99 minutes. Extended degas time periods allow for “beyond cleaning” applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing, and dispersion of particles. Constant activity/power tracking automatically maintains the same ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Consult with your Branson representative about the Bransonic accessories and solution best suited for your application needs. Visit us at www.Bransonic.com Bransonic® CPXH Ultrasonic Baths The CPXH Series is completely programmable. Once the process is entered into the controller, the end user only has to start the program and they are free to leave the unit on its own to do the job. The programmable process allows the process engineer to choose the temperature set point at which the degassing and ultrasonic time periods are triggered to begin. Once the CPXH ultrasonic run time period is reached, the unit shuts off, delivering the same results – every time. When the process temperature reaches the programmable set point, the ultrasonic cycle begins. This includes selectable times for both degas and ultrasonic processing. When cleaning delicate parts, the CPXH allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process. Click Here to View Product Video INCLUDED: The Branson CPX5800H Digital Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For 2800 Series Ultrasonic Cleaner 0.75 Gallon.

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. *Note: Perforated Trays for the 1800, 2800, and 3800 Series have perforated holes running lengthwise toward the bottom; 3 rows only. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For 3800 Series Ultrasonic Cleaner 1.5 Gallon.

Elmi DTS4 Microplate Shaker Incubator. Capacity for 4 microplates. It can be used for incubation or  (more)shaking only if necessary. Temperature range: ambient + 5 ° C to 60 ° C. Heating above and below the plates. Stirring speed: 100-1300 rpm. Eccentricity: 1.5 mm. Timer: 1 999 minutes or continuous. Standard dimensions of supported microplates: 86 x 128 x 15 mm. Digital display of temperature, stirring speed and timer. The ELMI DTS-4 Digital Thermal Microplate Shaker can accommodate 4 standard microplates simultaneously, offering a significant increase in productivity. A bi-directional heating system ensures uniformity and eliminates condensation. The DTS-4 is easy to use with a control panel that displays the temperature, RPM and timer settings separately. An anti-vibration system coupled with a durable design allows for consistent use and long life.

This listing is for a Lion Mark II Formaldemeter.The unit is in full working condition and is ready  (more)for immediate release.The Lion Formaldemeter MK11 is a specialized instrument designed for measuring formaldehyde concentrations in various environments. This meter is essential for professionals in fields such as environmental monitoring, industrial hygiene, and health and safety compliance. Here are some key features and considerations regarding its use:Key Features:Service and Calibration: The Lion Formaldemeter MK11 can be serviced and calibrated at any general service facility that is equipped to handle PPM Formaldemeters and Glutaraldemeters. This ensures reliable performance and accurate readings over time.Phenol Filters: The device includes the option to fit phenol filters over the sampling nozzle. These filters are crucial for preventing saturation, thereby ensuring accurate and reliable readings. It is recommended to replace these filters approximately every 10 samples to maintain optimal performance.Cross-Sensitivity: Users should be aware that the Formaldemeter may exhibit cross-sensitivity to other volatile aldehydes and alcohols. This characteristic can potentially affect the accuracy of measurements, so it is important to consider the presence of these substances in the environment being tested.Calibration Warning: For accurate calibration, it is critical to avoid using interference gases. Calibration should always be performed under controlled conditions to ensure the integrity of the measurements.Applications:The Lion Formaldemeter MK11 is ideal for a variety of applications, including:Environmental monitoring in workplaces and laboratoriesAssessing formaldehyde levels in building materials and indoor air qualityCompliance testing for health and safety regulations

Motic AE2000 LED Binocular Inverted Microscope Magnification Range 4x to 20x Optical System Colour C (more)orrected Infinity (CCIS) Illumination 3W LED Features - Entry level model of Motic's inverted microscopes - Designed for routine live cell inspection with an easy and flexible set up - Offers superior image quality when viewing cell cultures in microbiology, living organisms, and tissue - Switch from Brightfield to Phase Contrast by a simple push of the phase ring slider - Fixed stage plate carries a glass or metal insert for quick overview and comfortable change of objectives - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 2 μm - Auto ON-OFF illumination function via built-in IR-sensor - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The AE2000 is a revolutionary design that is packed with features and sets a new benchmark in affordable inverted microscopy. The AE2000 microscopes are Motic’s entry models of inverted microscopes, providing a flexible optical concept to meet best image quality and robust design for a long lifetime under rough lab conditions. This version of the Motic AE2000 is an inverted microscope with a binocular head and 4X, 10X and 20X objectives. The AE2000 is the perfect microscope for routine microbiology in clinical and pharmaceutical laboratories, also offering best options for university teaching. In full accordance with Motic’s CCIS Infinity System, the LWD Plan Achromatic objectives with an ingenious Phase contrast concept deliver a remarkable image quality. 10X and 20X Phase Contrast objectives are an integral part of all standard packages, while the optional 4X Phase objective is dedicated to fast screening. A 40X Phase objective is available too. The AE2000 stand carries a quadruple nosepiece with a precise click stop of objective positions. Rich illumination power is given by the 30 Watt Halogen light source in a Fixed-Koehler setup, simply interchangeable with 3W LED modules of different color temperatures. INCLUDED: The Motic AE2000 LED Binocular Inverted Microscope includes: - Widefield High Eyepoint Eyepiece N-WF 10X / 20mm - Side Facing Quadruple Nosepiece - PL PH 4x, PL PH 10x, and PL PH 20x Objectives - Phase Slider Ph0, BF, Ph1 - Centering Telescope & Keys - Plain Stage with Metal & Glass Inserts - 45mm Blue, Green and Neutral Density Filters - ELWD Condenser N.A. 0.30 (WD = 72mm) with Filter Holder - Allen Hexagonal Key and Vinyl Dust Cover - 3W LED with Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Four load cell stainless steel platforms The frame for recessing (foundation) is part of the set &nd (more)ash; you will receive it with the ordered platform.

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.