Branson M8800H Mechanical Heated Ultrasonic Cleaner

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For Branson 1800 Series Ultrasonic Cleaner.

Crest P230HT-45 Digital Ultrasonic CleanerFeatures - Ceramically enhanced transducer technology with (more) industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P230HT-45 Digital Ultrasonic Cleaner is an efficient and versatile cleaning device, featuring ceramically enhanced transducer technology with industrial bonded assembly for superior performance. Operating at a frequency of 45 kHz, it ensures a homogenous sound field and even energy distribution through frequency sweeping, preventing standing waves. The cleaner has a tank capacity of 0.75 gallons (2.8 liters) with dimensions of 9.5 x 5.25 x 4 inches (237 x 134 x 100 cm) and an overall size of 11.5 x 6.37 x 9.25 inches (265 x 162 x 295 cm). It offers an adjustable bath temperature between 20°C and 80°C, with an average ultrasonic power of 80 watts. The digital heater can be set from 0 to 99 minutes or for continuous operation, reaching temperatures up to 175°F (80°C). The deep-drawn stainless steel tank with rounded corners allows for easy cleaning, and the intrinsically safe heater includes dry-run protection, ensuring safe and reliable use. INCLUDED: The Crest P230HT-45 Digital Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Crest P2600HT-45 Digital Ultrasonic CleanerFeatures - Ceramically enhanced transducer technology wit (more)h industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P2600HT-45 Digital Ultrasonic Cleaner is a high-performance cleaning unit designed to deliver exceptional results. Operating at an ultrasonic frequency of approximately 45 kHz, it features ceramically enhanced transducer technology with industrial bonded assembly to ensure a homogenous sound field and effective energy distribution. The unit is equipped with a digital control and display, allowing precise adjustment of the cleaning time from 1 to 99 minutes, or continuous operation. The integrated heater allows the liquid temperature to be adjusted in 1K increments up to 80°C. The deep-drawn stainless steel cleaning tank, with rounded corners, facilitates easy maintenance, while the intrinsically safe heater includes dry-run protection for safe operation. With a substantial tank capacity of 7 gallons (26.1 liters) and an average ultrasonic power of 300 watts, this cleaner is ideal for extensive cleaning applications. Additionally, it includes a drain valve assembly for tanks with capacities of 2.5 gallons or more, enhancing usability and efficiency. INCLUDED: The Crest P2600HT-45 Digital Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Crest Ultrasonics Mesh Basket for P1200 Ultrasonic Cleaner The Crest Ultrasonics Mesh Basket for P12 (more)00 Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The Crest Ultrasonics Mesh Basket for P1200 Ultrasonic Cleaner is 19" in length x 5" in width x 5" in depth and is for use with the P1200 Ultrasonic Cleaners. The Crest Ultrasonics Mesh Basket for P1200 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.

Crest Ultrasonics Perforated Basket for P1100 Ultrasonic Cleaner The Crest Ultrasonics Perforated Ba (more)sket for P1100 Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The Crest Ultrasonics Perforated Basket for P1100 Ultrasonic Cleaner is 11.5" in length x 8.5" in width x 7" in depth and is for use with the P1100 Ultrasonic Cleaners. The Crest Ultrasonics Perforated Basket for P1100 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.

Crest Ultrasonics Perforated Basket for P1800 Ultrasonic Cleaner The Crest Ultrasonics Perforated Ba (more)sket for P1800 Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The Crest Ultrasonics Perforated Basket for P1800 Ultrasonic Cleaner is 19" in length x 10.75" in width x 5" in depth and is for use with the P1800 Ultrasonic Cleaners. The Crest Ultrasonics Perforated Basket for P1800 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.

This Sorvall SLC-4000 Fixed Angle Centrifuge Rotor PTI F9S-4x1000 was removed from a university lab  (more)where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;7,000rpm9,220 x gHolds: 4 X 100ml

This item has just arrived in our stock. Please enquire for further details.

Eppendorf A-2-DWP-AT Microplate Rotor & Buckets The Eppendorf A-2-DWP-AT Microplate Rotor &  (more)Buckets features two deepwell-plate buckets, which can each hold up to two plates for simultaneous processing of up to 192 samples. Reaches speeds of 4,500 RPM with a max RCF of 3,486 x g. This rotor can accommodate MTP, DWP, or filtration plate kits. The A-2-DWP-AT can only be used with Eppendorf centrifuge models 5810, or 5810R. INCLUDED: The Eppendorf Swing Bucket A-4-38 Rotor includes: - 2 Deep Well Plate Buckets - Full 1 Year Parts and Labor Warranty Eppendorf A-2-DWP-AT Microplate Rotor & Buckets SpecificationsMax Rotational Speed4,500 rpmMax RCF3,486 x gMax Capacity2 x 6 MTP; 2 x 2 DWP; 2 x 1 filtration plate kitsAutoclavable121°C for 20 minutesCompatibilityEppendorf 5810, and 5810R

HX7 scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68)  (more)mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.