Vortex VXMPAL Ohaus

This Dynatech MR 250 Microplate Reader was removed from a university lab where it was surplus to req (more)uirements. The item powers on with the lamp working, and it printed out some info after the initial warm-up sequence. It is in reasonably good cosmetic condition but has some marks from use.

Bio-Rad UltraMark Microplate Imaging System This item was removed from a university where it was sur (more)plus to requirement. The unit powers up and is in good working order (thermometer not included).It is in fair cosmetic condition. No controller or additional equipment included to adjust the temperature. Model: Ultramark.

Tecan MultiCheck for Infinite F50 - QC Tools and Megellan Software This was removed from a universi (more)ty lab where it was surplus to requirements. Items are in excellent cosmetic condition and appear to be unused. The software on the memory stick was tested and found to be working as intended - the first stages of set-up were completed without issue. 1x Test microplate absorbance reader1x 4 GB memory stick with Multicheck Infinite F50 Software1x Instruction booklet1x Sealed envelope1x Metallic sponge-lined carrying case

Balance of analytical precision brand new. Readability 0,001 g. Capacity 150g. Linearity ≤±0,003 mg  (more)Repeatability, ≤± 0,0015 mg Range of temperature (0-40ºC) Diameter of plate: 100mm. Lever system monolithic double. Automatic calibration weight, external. Digital display. Counting, weighing in percent, net-total, conversion of the unit of mass, weighing animals. Includes manual. Specifications

Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included For (more)mats Accepted 96-Well, 384-Well Flat Bottom Plates, Cuvettes Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm, 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates as well as cuvettes - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader with Cuvette Port (Model MR9611) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9611 is designed for efficient processing of multiple samples and accepts standard 96 well plates, 384 well plates, as well as cuvettes for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5°C up to 45°C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included includes: - SmartReader PC Software for MR9611 - Cuvette Port - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VOGTLIN GCM Red-y Compact Mass Flow Meter Model: Vögtlin GCM-C3EA-BN00 Medium: Air/air Measuring ran (more)ge: 0.2-10 Measuring unit: ln/min Accuracy : ±2.0 % end value (range to 200 ln/min) Temperature: 20 °C Pressure inlet: 2 bar a Connection: G1/4″ Inside thread Body material: Aluminum Seals: FKM Power supply: Battery Calibration protocol: with Ref. Pressure : 1013 [mBar] Ref. Temperature : 0 [°C]

6 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations that require particular temperature stability. All units house six easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150°C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunoassays, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models) Technical Specifications

This was removed from a university lab where it was surplus to requirements. The room is currently d (more)isassembled and for collection only in Bedwas, Caerphilly UK Everything is in good cosmetic condition with minor marks. It was in good working order prior to disassembly. Double doorway entry: 2x Sliding Doors:5x doorway wall panels: Perspex panels:•14x 105 x 98cm white panels•1x 105 x 98cm clear panel•2x 118cm x 104 cm white panels• 4x 115 x 96cm thicker white panels• 7x 96 x 96cm thicker white panels Rubber Seals:The seals go around the perspex panelling. -as seen in photos. 22x large rubber seals4x smaller rubber seals 1x Monmouth Circulaire air vent:Model WCAM 2250Air Vent Dims:D47cm x W102cm x H96cm 2x Air Vent Legs:The units are in good cosmetic condition and are adjustable. 1x Monmouth Scientific ON/OFF Switch: Aluminium Frame:6mm Hex Key to be used to attach and tighten sections together •2x lengths of 317cm x5cm•4x lengths of 196cm x 5cm1x length of 217cm x 5cm5x lengths of 230cm x 3cm

Flat polygonal sheets - set (1 mg - 500 mg) E2-class mass standards represent an exceptional standar (more)d of precision in mass measurement. Classed as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class mass standards - key features High precision measurements - Class E2 mass standards must meet stringent measurement precision standards. The permissible deviations from the actual mass are strict, making this class of standards the ideal solution for applications requiring extreme accuracy. Stability over Time - An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control - Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications - E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. The set includes: wooden box 12 mass standards 1 pair of tweezers 1 brush Material: nickel silver *The 1 mg, 2 mg and 5 mg mass standards are made of aluminum. Zastosowanie 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Scilogex MX-T6-S Analog Tube RollerThe Scilogex MX-T6-S Analog Tube Roller is ideal for mixing blood (more) samples, viscous substances, and liquid solid suspensions because of its gentle but effective rocking and rolling motion on its 6 rollers. The MX-T6-S can roll 10 x 50ml centrifuge tubes or 10 x 15ml centrifuge tubes at a speeds up to 70 rpms. The MX-T6-S can be used in cold rooms or incubators and features digital speed control and LCD display, speed and timer can be viewed simultaneously. INCLUDED: The Scilogex MX-T6-S Analog Tube Roller includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty