Velp Scientific HSC Heating Magnetic Stirrer

The system includes: pt100 probe (code A00000268), magnetic stir bar Ø8x40 mm (code A00000356). AREC (more) 7 CONNECT MAGNETIC STIRRER AREC 7 Connect features state-of-the-art heating plate technology, designed by VELP, which ensures temperature homogeneity, thermal efficiency and long-lasting heating performance. AREC 7 Connect can be connected to the external Pt100 probe for precise thermoregulation of the fluid, being ideal for temperature-sensitive applications in Chemistry, Biotechnology and Pharmaceuticals. The probe guarantees stable and precise thermoregulation up to 300°C, with an accuracy of ± 0.5°C. Powerful stirring for all your lab applications Thanks to the powerful magnetic coupling, you will have the possibility to stir up to 20 liters (H2O), from 30 up to 1700 rpm (aqueous solutions), ideal characteristics for any type of application, chemical, pharmaceutical and microbiological. In addition, the SpeedServo ™ technology, designed by VELP, will keep the speed constant as the viscosity changes. Absolute safety and ease of use for laboratory operators The AREC 7 Connect hotplate stirrer guarantees a higher level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. Save time with the new control panel Thanks to the double digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature and the stirring speed. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1700 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood. Programmable operation for excellent laboratory efficiency AREC 7 Connect is equipped with some exclusive and extremely advanced features that optimize unattended operation, easily usable, thanks to the intuitive display: - Integrated timer to suit your lab workflow - 1 min to 99 h 59 min (1 min steps) - Autorverse of the stirring direction which guarantees advanced mixing capabilities - from 5 s to 99 min and 59 s (1 s steps) - Programs in intermittent mode for better scheduling of unattended operations - from 5 s to 99 min 59 s (1 s steps) - Acoustic signals for timers and alarms - Safety lock function to avoid possible alterations of the working conditions 1 - Ceramic heating plate 2 - Main switch 3 - Speed control knob 4 - Temperature control knob 5 - Display A - Probe led B - Wi-Fi led C - Temperature setpoint led D - Timer led E - Autoreverse led G - Menu and lock button F - Intermittent mode led Note: it’s important to choose the most suitable magnetic stirring bar related to the type and the quantity of the liquid to be stirred as well as to the type of the beaker. Size and shape of the magnetic stir bar determines the stirring efficiency at any given speed. After purchase you will receive: ➢ AREC Connect, Heating Magnetic Stirrer ➢ Instruction manual ➢ Magnetic stir bar ➢ Power supply cable VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREC 7 Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC 7 Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC 7 will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP service centres.VELP ERMES: FROM USER WORK MANAGEMENT TO PROCESS DATA-RICH AREC 7 Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC 7 Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC 7 will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP assistance centres.

Features: - Reduce your process times significantly while performing the best mixing results ever -  (more)One system for literally all mixing tasks for low to high-viscosity media - The turbulent flow which is created by a special cone principle even at low speeds is unique to the VISCO JET® - Even with high-viscosity media and gels which naturally do not mix when common impellers are used you will observe an immediate flow through the entire beaker - This technology allows for de-gassing of gels while preventing air intake and foaming - A stirrer shaft is included as standard.

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 100 Advance is the ideal solution for demanding applications operating with viscosities up to 70,000 mPa. The electronically controlled brushless motor of the OHS 100 Advance agitates up to 100 l (H2O) with a maximum torque of 100 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

Scilogex MS-H-S Analog Circular Magnetic Hotplate StirrerThe Scilogex MS-H-S Analog Circular Magneti (more)c Hotplate Stirrer features an electronic speed control for constant speed even during changes in load and a low heat temperature stability. A ceramic coated steel plate is included to provide excellent thermal conductivity and to prevent corrosion. The MS-H-S Analog Circular Magnetic Hotplate Stirrer has a high magnetic adhesion and a long life, brushless motor. Click Here to View Product Video INCLUDED: The Scilogex MS-H-S Analog Circular Magnetic Hotplate Stirrer includes: - Stirrer Bar - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 3003.2 Spiral stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel Fe (more)atures - Generates axial flow for efficient medium conveyance from the bottom upwards - Ideal for homogeneous mixing and heat exchange with medium to high viscosity media - Suitable for low to medium speed operations for precise control - Constructed from AISI 316L / 1.4571 stainless steel for superior durability and corrosion resistance - Operates within an ambient temperature range of 5 - 40 °C, versatile for different laboratory conditions This advanced stirrer is crafted to create an axial flow, moving the medium efficiently from the bottom upwards, perfect for mixing and facilitating heat exchange in medium to high viscosity media. Featuring a large 150 mm diameter and an 800 mm shaft, it is constructed from the robust AISI 316L / 1.4571 stainless steel, ensuring durability and resistance to corrosion. Designed to operate at low to medium speeds, it offers unparalleled control for a wide array of laboratory applications. With a height of 244 mm and weighing 1.045 kg, it’s optimized for stability and performance within a permissible ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3003.2 Spiral stirrer includes: - IKA R 3003.2 Spiral stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 1401 Propeller The R 1401 propeller head is designed for the use with the overhead stirrers E (more)UROSTAR 20 high speed digital / control. It is ideally suited for applications which work with low to medium mixing viscosities that require axial flow pattern at high speed with minimal temperature increase.Working range: 1 - 30 lRotor diameter: 55 mmNote: R 1401 needs to be attached to the precision shaft R 6000 in order to operate. The shaft is not included in the scope of delivery of R 1401. INCLUDED: The IKA R 1401 Propeller includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Memmert SV2945 Stirring device with support frame for 29 and 45 L models (requires special cover) Ne (more)w equipment in its original packaging Memmert reference: SV2945 Stirring device with support frame for 29 L and 45 L Memmert water and oil baths

Varian 4000 GC/MS/MS Gas Chromatograph Included: Varian 3800 / 3380 MS4000 mass spectrometer Without (more) auto sampler Without Software Without a computer Untested equipment A few lines on the screen (see photos)

The antivibration table has been designed to eliminate ground vibrations during the operation of aut (more)omatic feeder. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located on the left side of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the SAL/T version is made of powder-coated steel, and the top is made of HPL board.

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW