Scilogex MS-PA LED Digital Circular Magnetic Stirrer

Yamato LT-400AA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V Speed Range  (more) 10~300rpm Max Torque 0.9N•m (9.0kgf•cm) Motor DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Set includes stand, rod, stainless steel shaft and 60mm 4-blade propeller. Speed range 10~300 rpm. INCLUDED: The Yamato LT-400AA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V includes: - Stand and Rod - Clamp, Safety Cover, Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex SCI40-S Overhead LED Digital Stirrer Bundle, 110-220V Stirring Capacity 40L Viscosity Maxim (more)um 50,000mPas Speed Range 50 to 2,200 RPM Features - A wide range of speed from 50 to 2200rpm - Brushless DC motor for long life and maintenance free - Analog speed controls displayed on the LED display for monitoring actual speed - High torque for viscous medium stirring - Over torque protection automatically stops the motor - Safety circuits allow for safe stop function in anti-stall or overload condition - A through-shaft design allows for easy adjustment of the impeller position - In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns - Pass through stirrer rods accepted - cTUVus approved for UL and CSA Scilogex overheard stirrers can accomplish the most demanding tasks and provide high safety and increase performance. They are widely used in chemical synthesis, pharmaceutical synthesis, and physical and chemical analysis, as well as petrochemical industries. These products have a high degree of reliability and performance, and are protected by a two year manufacturer’s warranty. INCLUDED: The Scilogex SCI40-S Overhead LED Digital Stirrer Bundle, 110-220V includes: - 18900071 Stainless Steel Cross Stirrer - 18900131 Stand - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RW 47 Digital Mechanical Overhead Stirrer PackageExtremely powerful, mechanically controlled lab (more)oratory stirrer designed for highly viscous applications for quantities up to 200 l (H2O). It is suitable for intensive mixing for use in laboratories and pilot plants. The stirrer comes equipped with a protection for overheating of the motor by means of self-locking temperature limiter. Additionally, to secure bowls, a stirring shaft protection and clamping fixture are optionally available. INCLUDED: The IKA RW 47 Digital Mechanical Overhead Stirrer Package includes: - RW 47 digital (drive) - R 2302 Propeller stirrer - R 474 Telescopic stand - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA RW 47 Digital Mechanical Overhead Stirrer Package SpecificationsStirring quantity max. per stirring position (H2O)200 lMotor rating input511 WMotor rating output370 WMotor principlethree-phase currentSpeed displayLEDSpeed range57 - 1300 rpmViscosity max.100000 mPasOutput max. at stirring shaft300 WPermissible ON time100 %Torque max. at stirring shaft 3000 NcmTorque max. at stirring shaft at 60 1/min (overload)4642 Ncm Torque max. at stirring shaft at 100 1/min3000 NcmTorque max. at stirring shaft at 1.000 1/min285 NcmTorque I max.3000 NcmTorque II max.620 NcmSpeed range I (50 Hz)57 - 275 rpmSpeed range II (50 Hz)275 - 1300 rpmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement10 ±rpmStirring element fasteningchuckChuck range diameter3 - 16 mmHollow shaft, inner diameter13 mmFastening on standflangeSpeed controlmechanicalNominal torque30 NmHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)145 x 478 x 358 mmWeight16.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54Voltage3 x 400 / 3 x 230 VFrequency50 HzPower input513 WComparison of ModelsSpecificationRW 20RW 20 PackageRW 28RW 47RW 47 PackageStirring Quantity Max. (H2O)20 l20 l80 l200 l200 lMotor Rating Input85 W70 W220 W478 W511 WMotor Rating Output35 W35 W94 W370 W370 WSpeed Range60 - 2000 rpm60 - 2000 rpm60 - 1400 rpm69 - 1560 rpm57 - 1300 rpmViscosity Max.10000 mPas10000 mPas50000 mPas100000 mPas100000 mPasOutput Max. at Stirring Shaft26 W26 W90 W300 W300 WTorque Max. at Stirring ShaftN/A150 Ncm900 NcmN/A3000 Ncm.comparison-table tr td:nth-child(6) { background-color: #fffacd; }

IKA R 1352 Centrifugal Stirrer Two-bladed, blades open with increasing speed. For stirring in round (more) vessels with narrow necks. Effect is similar to that of a 4-bladed propeller stirrer. Medium to high speeds required.Stirrer Ø: 60 / 15 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1352 Centrifugal Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade Due to its blade dimensions, the p (more)itched-blade impeller PR 30 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 145-290 mm, ideal ground clearance: 29-58 mm, ideal filling level: 145-290 mm, and ideal volume: 2,400-19,200 ml. The pitched-blade impeller PR 30 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036110200 Hei-PLATE Mix 'n' Heat Core Hotplate Stirrer, 145mm Plate The Heidolph 036110200  (more)Hei-PLATE Mix 'n' Heat Core Hotplate Stirrer, 145mm Plate was designed with two rotary knobs to allow direct access to the two main functions. The speed and temperature are set using a scale. The maximum values are 1,400 RPM and 300°C. This magnetic stirrer is very easy to use and is equipped with the most important safety features. The large safety distance between the heating plate and the control elements, as well as the optical residual heat indicator at temperatures 50°C, protect against burns. The heating function can be activated separately and is indicated by the LED button lighting up. The patented Kera-Disk® footprint made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 145 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. The material used also enables the fastest heating times. Click Here to View Product Video INCLUDED: The Heidolph 036110200 Hei-PLATE Mix 'n' Heat Core Hotplate Stirrer, 145mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

The Eppendorf CellTram Air 5176 Pneumatic Manual Microinjector utilizes air for pressure transmissio (more)n to guarantees clean and simple handling of a piston pump. Change in volume: 88 µl Adjustable total volume: 2,640 µl Max pressure: 20,000 hPa Dimensions: 175 x 60 mm Weight: 1.4 kg

Interfurn Drawer Door Cabinet, RT Creme 600x600x490

Memmert HCP150 Humidity Chamber 156L, 115V Temperature Range Ambient +7°C to 90°C Humidity Control  (more)20 to 95% RH, or no RH Chamber Volume 156L (5.5 cu. ft.) Features - Ideal for climate and temperature testing, including accelerated life and 85/85 tests - Unsurpassed temperature and humidity uniformity across the chamber interior - Easy-to-use ControlCOCKPIT interface and AtmoCONTROL software for intuitive programming - Durable stainless steel construction that’s scratch-resistant and easy to clean - Six-sided heating, including heated inner glass door, to prevent condensation - Aluminum thermal layer for optimal temperature distribution and energy retention - Battery-buffered ControlCOCKPIT and optional MobileALERT for enhanced monitoring - Wide range of customizable test parameters for environmental simulation - Rear-panel feed-through and process runtime delay for precise test control - Comprehensive alarm functions and three-fold overtemperature protection for sample safety The Memmert HCP150 Humidity Chamber 156L, 115V is engineered to deliver precise climate and temperature control, making it ideal for a wide range of environmental and accelerated life tests, including the rigorous 85/85 tests. Offering a temperature range from Ambient +7°C to 90°C and active humidity control from 20% to 95% RH, this chamber creates a stable and highly customizable testing environment with an exceptional homogeneity of temperature and humidity throughout. Designed with Memmert’s user-friendly ControlCOCKPIT interface and the advanced AtmoCONTROL software, it features intuitive “Touch, turn & go” operation, allowing for straightforward programming of complex test parameters. Constructed with robust stainless steel that is scratch-resistant and hygienic, the HCP150 is built to withstand extensive use while maintaining a sleek, easy-to-clean design. Its advanced heating concept includes heating elements on all six sides and a heated inner glass door to prevent condensation and ensure uniform conditions. An integrated aluminum thermal conductive layer aids in maintaining optimal temperature distribution, while also providing a heat reservoir in case of power fluctuations. The chamber’s efficient humidity control prevents condensation buildup, protecting sensitive samples and reducing maintenance requirements. To support continuous and demanding tests, the HCP150 includes various convenience features like a rear-panel feed-through, battery-buffered ControlCOCKPIT for enhanced security, and optional MobileALERT for remote monitoring of alarm conditions via email or SMS. Additional safety features include three-fold overtemperature protection and real-time display of all essential parameters. With comprehensive programming options, reliable alarm functions, and precise environmental simulation, the Memmert HCP150 ensures both safety and accuracy, providing an optimal solution for laboratories focused on climate and temperature testing. INCLUDED: The Memmert HCP150 Humidity Chamber 156L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Water Tank - 2 x Sponge Plugs for Silicone Entry Ports - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 10 kg.

Pfeiffer HiCube 300 Neo, 100 ISO-K, MVP 030-3 Turbo Pumping Station Final Pressure 1 x10-7 hPa / 7. (more)5 x 10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 260 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 300 Neo, 100 ISO-K, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution for all high vacuum applications. It offers simple operation through a 7-inch touch display and can be controlled remotely via a web server, making it highly versatile and user-friendly. Designed for reliability, it operates with a final pressure of 1 x 10⁻⁷ mbar and a pumping speed of 260 l/s for nitrogen. The backing pump, the MVP 030-3, delivers a pumping speed of 1.8 m³/h at 50 Hz, ensuring efficient performance. This turbo pumping station uses air-cooled forced convection to maintain optimal conditions and operates quietly with a sound pressure level of ≤50 dB(A). Its HiPace 300 turbopump and DN 100 ISO-K connection flange make it compatible with a variety of applications. Built to work worldwide, it supports input voltages ranging from 100-240 V AC. Weighing 20.5 kg, it is robust and reliable, offering consistent performance in environments with ambient temperatures from 5 to 40°C. INCLUDED: The Pfeiffer HiCube 300 Neo, 100 ISO-K, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA A11 Basic Analytical Mill Operating Principle Cutting / Impact Max. Speed 28,000 RPM Feed Hard (more)ness Max. 6 Mohs Features - Moist and gluey materials can be pulverized by adding water - Grinding chamber made of Tefcel (PTFE, glass fiber-reinforced) with stainless steel inlet (1.4571), useful volume 80 ml (incl. with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamber - Optionally, a 250 ml grinding chamber is available - Can cool mill feed with dry ice or liquid nitrogen for processing sensitive materials. - Small footprint with high performance, ideal for laboratory use. The IKA A11 Basic Analytical Mill is a versatile batch mill designed for two different grinding procedures. It features impact grinding for hard, brittle, or non-elastic materials using a high-grade stainless steel beater, suitable for materials with a Mohs hardness up to 6. It also supports cutting grinding for pulverizing soft, fibrous materials with an optional cutting blade. The mill can pulverize moist and gluey materials by adding water and includes an 80 ml Tefcel (PTFE, glass fiber-reinforced) grinding chamber with a stainless steel inlet, with an optional 250 ml chamber available. Capable of cooling the mill feed with dry ice or liquid nitrogen, it operates at a maximum speed of 28,000 rpm with a circumferential speed of 53 m/s. The compact design measures 85 x 240 x 85 mm and weighs 1.5 kg, making it suitable for laboratory environments with temperatures from 5 to 40 °C and humidity up to 80%. The A11 Basic Analytical Mill offers precise and efficient grinding with a motor rating input of 160 W and output of 100 W, ensuring reliable performance for various grinding applications.INCLUDED: The IKA A11 Basic Analytical Mill includes: - A 11 basic Analytical mill - A 11.1 Spare beater - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA A11 Basic Analytical Mill SpecificationsProcess typebatchOperating principlecutting/impactMotor rating input160 WMotor rating output100 WSpeed max.28000 rpmCircumferential speed max.53 m/sUseable volume max.80 mlFeed hardness max.6 MohsFeed grain size max. 10 mmMaterial beater/cutter stainless steel 1.4034Material milling chamber stainless steel 1.4571Power-ON time1 minPower-OFF time10 minMill feed can be cooled in milling chamber with dry iceyesMill feed can be cooled in milling chamber with liquid nitrogenyesDimensions (W x H x D)85 x 240 x 85 mmWeight1.5 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 43Voltage220 - 230 / 100 - 115 VFrequency50/60 HzPower input160 W