Scilogex MS-H-S Analog Circular Magnetic Hotplate Stirrer

Digital display for speed and temperature AM4 Digital PRO is the ideal magnetic stirrer for precise  (more)thermoregulation. With this instrument it is possible to set the temperature up to 370°C and the stirring speed from 50 to 1500 rpm. SpeedServo ™ ensures a constant speed even when the viscosity changes (counter-reaction). In addition, the digital display allows you to precisely set the stirring speed and temperature. Excellent thermoregulation with Pt100 and VTF The AM4 Digital PRO package includes the Pt100 external probe, for thermoregulation up to 250°C, with an accuracy of ± 1.0°C. AM4 Digital PRO can be connected to VTF ensuring perfect thermoregulation up to 300°C, with an exceptional accuracy of ± 0.5°C. The exclusive CerAlTop ™, made of ceramic coated aluminum alloy, guarantees exceptional temperature homogeneity and excellent resistance and heat transmission. Maximum protection and comfort The AM4 Digital PRO hotplate stirrer guarantees a higher level of safety and protection for the user. The control panel is easily accessible, is positioned at a safe distance from heat sources and is protected from any damage caused by liquid leaks thanks to a special drain groove. AM4 Digital PRO can be programmed with a maximum safety temperature, useful for some particular applications that require not to exceed certain temperatures, and avoid accidental overheating. In addition, a 'Hot Plate Warning' is activated and remains displayed even when the instrument is turned off, until the temperature of the plate has cooled below 50°C. The die-cast structure is designed so that accidental spills of liquid cannot reach the internal parts of the hot plate agitator.

15 stirring positions, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept  (more)for powerful mixing of solutions, power reserves up to 3,000 ml per stirring point, 100% synchronized speeds, jerk-free stirring even at low speeds. Fully encapsulated and hermetically sealed stainless steel housing, IP68, water-, dust-, and germproof, extremely robust construction and performance, easy to clean and maximum resistance, submersible in water- resp. oil baths, suitable for the use in CO2-incubators and ovens. Stirring points: 15 Stirring point distance: 65 mm Stirring volume/stirring point: 1 – 3000 ml Speed range: 100 – 1,600 rpm Stirring power (max.): 40 W Material housing: Stainless steel Permitted operation conditions HT-version:  up to +200°C in air, up to +95°C in water submerged Dimensions (WxDxH): 245 x 375 x 38 mm Weight: 9.5 kg

Stirrer for the Mettler Toledo DL series.

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Stirring speed: up to 1100 rpm Suitable for volumes up to 5 liters (H2O) Plate diameter: 125 mm Idea (more)lly suited for titrations Dimensions (WxHxD): 150 x 115 x 235 mm Weight: 1.5kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

Thermo 6x85ml Fixed Angle Rotor w/ Lid, Cat # 086850F Thermo 6x85ml Fixed Angle Rotor w/ Lid, Cat #  (more)086850F, never used, new in opened box. This rotor is used in the Thermo Multifuge Benchtop Centrifuges. Thermo 6x85ml Rotor SpecificationsMax RCF26,200 x gMax Speed15,400 RPMCapacity6 x 85ml (dia. 38 mm, length 105mm)

Labconco CentriVap CompleteVacuum Concentrator with Heat BoostTheall-in-one CentriVap Complete Vacuu (more)m Concentrator houses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315022 CentriVap CompleteVacuum Concentrator with Heat Boost, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW